In situ generated ß-Yb₂Si₂O₇ environmental barrier coatings to protect non-oxide silicon-based ceramics in gas turbines (Band 16)

Download In situ generated ß-Yb₂Si₂O₇ environmental barrier coatings to protect non-oxide silicon-based ceramics in gas turbines (Band 16) PDF Online Free

Author :
Publisher : Cuvillier Verlag
ISBN 13 : 3736965826
Total Pages : 130 pages
Book Rating : 4.7/5 (369 download)

DOWNLOAD NOW!


Book Synopsis In situ generated ß-Yb₂Si₂O₇ environmental barrier coatings to protect non-oxide silicon-based ceramics in gas turbines (Band 16) by : Mateus Lenz Leite

Download or read book In situ generated ß-Yb₂Si₂O₇ environmental barrier coatings to protect non-oxide silicon-based ceramics in gas turbines (Band 16) written by Mateus Lenz Leite and published by Cuvillier Verlag. This book was released on 2022-02-25 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: In face of an accelerating climate change, the reduction and substitution of fossil fuels is crucial to decarbonize energy production. Gas turbines can operate with versatile fuel sources like natural gas and future fuels such as hydrogen and ammonia. In a next future, thermal efficiencies above 65% are expected to be achieved by implementing non-oxide silicon-based (i.e. Si₃N₄, SiC and SiC/SiC) ceramic components. However, water vapor is one of the main combustion products, which leads to rapid corrosion due to the volatilization of the protective SiO₂ layer above 1200 °C. Hence, an in situ generated Yb₂Si₂O₇ double layered environmental barrier coating system composed of silazanes and the active fillers Yb2O3 and Si was processed at 1415 °C for 5 h in air to protect Si3N4, SiC and SiC/SiC from corrosion. The easy to apply coating system exhibits a dense microstructure with a thickness of up to 150 µm, besides an excellent adhesion strength (36.9 ± 6.2 MPa), hardness (6.9 ± 1.6 GPa) and scratch resistance (28 N). It remarkably overcomes over 15 thermal cycles between 1200 and 20 °C and shows almost no mass loss after harsh hot gas corrosion at 1200 °C for 200 h (pH2O = 0.15 atm, v = 100 m s⁻¹).

Environmental Barrier Coatings

Download Environmental Barrier Coatings PDF Online Free

Author :
Publisher : MDPI
ISBN 13 : 3039365177
Total Pages : 168 pages
Book Rating : 4.0/5 (393 download)

DOWNLOAD NOW!


Book Synopsis Environmental Barrier Coatings by : Kang N. Lee

Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.

Reactive Sputter Deposition

Download Reactive Sputter Deposition PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 3540766642
Total Pages : 584 pages
Book Rating : 4.5/5 (47 download)

DOWNLOAD NOW!


Book Synopsis Reactive Sputter Deposition by : Diederik Depla

Download or read book Reactive Sputter Deposition written by Diederik Depla and published by Springer Science & Business Media. This book was released on 2008-06-24 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this valuable work, all aspects of the reactive magnetron sputtering process, from the discharge up to the resulting thin film growth, are described in detail, allowing the reader to understand the complete process. Hence, this book gives necessary information for those who want to start with reactive magnetron sputtering, understand and investigate the technique, control their sputtering process and tune their existing process, obtaining the desired thin films.

Nuclear Magnetic Resonance

Download Nuclear Magnetic Resonance PDF Online Free

Author :
Publisher : Royal Society of Chemistry
ISBN 13 : 1839164964
Total Pages : 299 pages
Book Rating : 4.8/5 (391 download)

DOWNLOAD NOW!


Book Synopsis Nuclear Magnetic Resonance by : Paul Hodgkinson

Download or read book Nuclear Magnetic Resonance written by Paul Hodgkinson and published by Royal Society of Chemistry. This book was released on 2021-11-11 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear magnetic resonance has proved a uniquely versatile and powerful spectroscopic technique, with applications across chemistry, physics and medicine. The success of NMR and its constant redevelopment means that the literature is vast and wide-ranging. Each chapter in this volume is a distillation of the key recent literature in different areas covering the spectrum of NMR theory and practice, and including solution-state, solid-state and in-vivo NMR. These reports will be invaluable both for new researchers wishing to engage with literature for the first time, and for seasoned practitioners, particularly service managers, wishing to keep in touch with the ever-expanding ways in which NMR is used.

Superalloys

Download Superalloys PDF Online Free

Author :
Publisher : ASM International
ISBN 13 : 1615030646
Total Pages : 439 pages
Book Rating : 4.6/5 (15 download)

DOWNLOAD NOW!


Book Synopsis Superalloys by : Matthew J. Donachie

Download or read book Superalloys written by Matthew J. Donachie and published by ASM International. This book was released on 2002 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers virtually all technical aspects related to the selection, processing, use, and analysis of superalloys. The text of this new second edition has been completely revised and expanded with many new figures and tables added. In developing this new edition, the focus has been on providing comprehensive and practical coverage of superalloys technology. Some highlights include the most complete and up-to-date presentation available on alloy melting. Coverage of alloy selection provides many tips and guidelines that the reader can use in identifying an appropriate alloy for a specific application. The relation of properties and microstructure is covered in more detail than in previous books.

Advanced Ceramics and Composites

Download Advanced Ceramics and Composites PDF Online Free

Author :
Publisher : expert verlag
ISBN 13 : 9783816918301
Total Pages : 362 pages
Book Rating : 4.9/5 (183 download)

DOWNLOAD NOW!


Book Synopsis Advanced Ceramics and Composites by : Rainer Gadow

Download or read book Advanced Ceramics and Composites written by Rainer Gadow and published by expert verlag. This book was released on 2000 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Surface Coating and Modification of Metallic Biomaterials

Download Surface Coating and Modification of Metallic Biomaterials PDF Online Free

Author :
Publisher : Woodhead Publishing
ISBN 13 : 1782423168
Total Pages : 449 pages
Book Rating : 4.7/5 (824 download)

DOWNLOAD NOW!


Book Synopsis Surface Coating and Modification of Metallic Biomaterials by : Cuie Wen

Download or read book Surface Coating and Modification of Metallic Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2015-03-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite advances in alternative materials, metals are still the biomaterial of choice for a number of clinical applications such as dental, orthopedic and cardiac implants. However, there are a number of intrinsic problems associated with implanting metal in the biological environment, such as wear, corrosion, biocompatibility and toxicity, which must be addressed. Modern technology has enabled scientists to modify metal surfaces or apply special coatings to metals to improve their performance safety. Surface Coating and Modification of Metallic Biomaterials will discuss the most important modification techniques and coatings for metals, first covering the fundamentals of metals as a biomaterial and then exploring surface modification techniques and coatings. - An expansive overview of surface modification techniques for biomedical use - In-depth exploration of issues arising from metal biomaterial use - Includes examples of applications in a clinical setting

Ceramic Matrix Composites

Download Ceramic Matrix Composites PDF Online Free

Author :
Publisher : John Wiley & Sons
ISBN 13 : 1118832892
Total Pages : 725 pages
Book Rating : 4.1/5 (188 download)

DOWNLOAD NOW!


Book Synopsis Ceramic Matrix Composites by : Narottam P. Bansal

Download or read book Ceramic Matrix Composites written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2014-10-27 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive source of information on various aspects of ceramic matrix composites (CMC). It covers ceramic and carbon fibers; the fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration and joining. Each chapter in the book is written by specialists and internationally renowned researchers in the field. This book will provide state-of-the-art information on different aspects of CMCs. The book will be directed to researchers working in industry, academia, and national laboratories with interest and professional competence on CMCs. The book will also be useful to senior year and graduate students pursuing degrees in ceramic science and engineering, materials science and engineering, aeronautical, mechanical, and civil or aerospace engineering. Presents recent advances, new approaches and discusses new issues in the field, such as foreign object damage, life predictions, multiscale modeling based on probabilistic approaches, etc. Caters to the increasing interest in the application of ceramic matrix composites (CMC) materials in areas as diverse as aerospace, transport, energy, nuclear, and environment. CMCs are considered ans enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, space structures, as well as nuclear and chemical industries. Offers detailed descriptions of ceramic and carbon fibers; fiber-matrix interface; processing, properties and industrial applications of various CMC systems; architecture, mechanical behavior at room and elevated temperatures, environmental effects and protective coatings, foreign object damage, modeling, life prediction, integration/joining.

Sol-Gel Technologies for Glass Producers and Users

Download Sol-Gel Technologies for Glass Producers and Users PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 0387889531
Total Pages : 474 pages
Book Rating : 4.3/5 (878 download)

DOWNLOAD NOW!


Book Synopsis Sol-Gel Technologies for Glass Producers and Users by : Michel Andre Aegerter

Download or read book Sol-Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.

Metallurgical and Ceramic Protective Coatings

Download Metallurgical and Ceramic Protective Coatings PDF Online Free

Author :
Publisher : Springer Science & Business Media
ISBN 13 : 9400915012
Total Pages : 353 pages
Book Rating : 4.4/5 (9 download)

DOWNLOAD NOW!


Book Synopsis Metallurgical and Ceramic Protective Coatings by : K.H. Stern

Download or read book Metallurgical and Ceramic Protective Coatings written by K.H. Stern and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering is an increasingly important field and consequently those involved need to be aware of the vast range of technologies available to modify surfaces. This text provides an up-to-date, authoritative exposition of the major condensed phase methods used for producing metallurgical and ceramic coatings. Each method is discussed thoroughly by an expert in that field. In each chapter the principle of the method, its range of applications and technical aspects involved are described. The book not only informs the reader about established technologies familiar only to specialists, but also details activity on the frontier of coating technology providing an insight into those potential technologies not yet fully developed but which should emerge in the near future.

Carbon Nanotube Science

Download Carbon Nanotube Science PDF Online Free

Author :
Publisher : Cambridge University Press
ISBN 13 : 0521828953
Total Pages : 315 pages
Book Rating : 4.5/5 (218 download)

DOWNLOAD NOW!


Book Synopsis Carbon Nanotube Science by : Peter J. F. Harris

Download or read book Carbon Nanotube Science written by Peter J. F. Harris and published by Cambridge University Press. This book was released on 2009-03-19 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides coverage of all of the important aspects of carbon nanotube research, including synthesis, properties and potential applications.

Advanced Ceramics for Energy Conversion and Storage

Download Advanced Ceramics for Energy Conversion and Storage PDF Online Free

Author :
Publisher : Elsevier
ISBN 13 : 0081027842
Total Pages : 750 pages
Book Rating : 4.0/5 (81 download)

DOWNLOAD NOW!


Book Synopsis Advanced Ceramics for Energy Conversion and Storage by : Olivier Guillon

Download or read book Advanced Ceramics for Energy Conversion and Storage written by Olivier Guillon and published by Elsevier. This book was released on 2019-11-20 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to enable an affordable, sustainable, fossil-free future energy supply, research activities on relevant materials and related technologies have been intensified in recent years, Advanced Ceramics for Energy Conversion and Storage describes the current state-of-the-art concerning materials, properties, processes, and specific applications. Academic and industrial researchers, materials scientists, and engineers will be able to get a broad overview of the use of ceramics in energy applications, while at the same time become acquainted with the most recent developments in the field. With chapters written by recognized experts working in their respective fields the book is a valuable reference source covering the following application areas: ceramic materials and coatings for gas turbines; heat storage and exchange materials for solar thermal energy; ceramics for nuclear energy; ceramics for energy harvesting (thermoelectrics, piezoelectrics, and sunlight conversion); ceramic gas separation membranes; solid oxide fuel cells and electrolysers; and electrochemical storage in battery cells. Advanced Ceramics for Energy Conversion and Storage offers a sound base for understanding the complex requirements related to the technological fields and the ceramic materials that make them possible. The book is also suitable for people with a solid base in materials science and engineering that want to specialize in ceramics. - Presents an extensive overview of ceramic materials involved in energy conversion and storage - Updates on the tremendous progress that has been achieved in recent years - Showcases authors at the forefront of their fields, including results from the huge amount of published data - Provides a list of requirements for the materials used for each energy technology - Includes an evaluation and comparison of materials available, including their structure, properties and performance

Functionalized epitaxial graphene as versatile platform for air quality sensors

Download Functionalized epitaxial graphene as versatile platform for air quality sensors PDF Online Free

Author :
Publisher : Linköping University Electronic Press
ISBN 13 : 9179296750
Total Pages : 104 pages
Book Rating : 4.1/5 (792 download)

DOWNLOAD NOW!


Book Synopsis Functionalized epitaxial graphene as versatile platform for air quality sensors by : Marius Rodner

Download or read book Functionalized epitaxial graphene as versatile platform for air quality sensors written by Marius Rodner and published by Linköping University Electronic Press. This book was released on 2021-04-12 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: The work presented in this thesis focuses on epitaxial graphene on SiC as a platform for air quality sensors. Several approaches have been tested and evaluated to increase the sensitivity, selectivity, speed of response and stability of the sensors. The graphene surfaces have been functionalized, for example, with different metal oxide nanoparticles and nanolayers using hollow-cathode sputtering and pulsed laser deposition. The modified surfaces were investigated towards topography, integrity and chemical composition with characterization methods such as atomic force microscopy and Raman spectroscopy. Interaction energies between several analytes and nanoparticle-graphene-combinations were calculated by density functional theory to find the optimal material for specific target gases, and to verify the usefulness of this approach. The impact of environmental influences such as operating temperature, relative humidity and UV irradiation on sensing properties was investigated as well. To further enhance sensor performances, the first-order time-derivative of the sensor’s resistance was introduced to speed up sensor response and a temperature cycled operation mode was investigated towards selectivity. Applying these methods in laboratory conditions, sensors with a quantitative readout of single ppb benzene and formaldehyde were developed. These results show promise to fill the existing gap of low-cost but highly sensitive and fast gas sensors for air quality monitoring. Der Fokus dieser Thesis liegt auf der Erforschung von epitaxialem Graphen auf SiC als Plattform für Luftgütesensoren. Diverse Ansätze wurden untersucht, um die Sensitivität, Selektivität, Reaktionsgeschwindigkeit und Stabilität der Sensoren zu verbessern. Die Graphenoberfläche wurde unter anderem mit Metalloxid-Nanopartikeln oder nanometerdünnen Schichten funktionalisiert. Die funktionalisierten Sensorschichten wurden hinsichtlich ihrer Oberflächenbeschaffenheit, Unversehrtheit und chemischen Zusammensetzung mittels Rasterkraftmikroskopie und Raman Spektroskopie untersucht. Die Reaktionsenergien zwischen verschiedenen Analyten und Nanopartikel-Graphen-Kombinationen wurden mit Dichtefunktionaltheorie berechnet, um das optimale Material für spezifische Gase zu finden und um die Brauchbarkeit dieser Funktionalisierungsmethode zu verifizieren. Der Einfluss von äußeren Parametern wie Sensortemperatur, Luftfeuchte und UV-Einstrahlung auf die Sensoreigenschaften wurde ebenfalls untersucht. Um die Sensorleistung zu verbessern, wurde die erste zeitliche Ableitung des Sensorwiderstands als zusätzliches Signal eingeführt und ein temperaturzyklischer Betriebsmodus hinsichtlich seiner Eignung erforscht. Durch die Anwendung dieser Methoden ist es möglich, einzelne ppbs Benzol und Formaldehyd unter Laborbedingungen zu detektieren. Diese Ergebnisse sind vielversprechend, um die bestehende Lücke der günstigen, aber sehr sensitiven Sensoren für Luftqualitätsüberwachung zu schließen. Arbetet som presenteras i denna avhandling fokuserar på epitaxiell grafen på SiC som en plattform för luftkvalitetssensorer. Flera tillvägagångssätt har testats och utvärderats för att öka känsligheten, selektiviteten, responstiden, och stabiliteten hos sensorerna. Grafenytorna har modifierats till exempel med olika metalloxid-nanopartiklar och nanolager med användning av hålkatodsputtring och PLD. De modifierade ytorna undersöktes mot topografi, strukturell integritet och kemisk sammansättning med karakteriseringsmetoder som atomkraftsmikroskopi och Ramanspektroskopi. Interaktionsenergier mellan flera analyter och nanopartiklar-grafen- materialkombinationer beräknades med täthetsfunktionalteori för att hitta de optimala materialkombinationerna för specifika målgaser och för att verifiera användbarheten av ytmodifieringarna. Effekten av externa faktorer som arbetstemperatur, relativ fuktighet och UV-bestrålning på avkänningsegenskaper undersöktes också. För att ytterligare förbättra sensorprestanda introducerades första ordningens tidsderivat av sensorns resistans för att snabbare utvärdera sensorns respons, och ett temperaturcyklat driftläge i kombination med multivariat dataanalys undersöktes mot selektivitet. Genom att använda dessa metoder under laboratorieförhållanden utvecklades sensorer med en kvantitativ avläsning av enstaka ppb bensen och formaldehyd. Dessa resultat visar på en möjlig lösning för att fylla det hålrum som finns i dagens sensorteknologier för luftkvalitetsövervakning, där flera relevanta gaser i dagsläget inte kan mätas med kostnadseffektiva men mycket känsliga och snabba gassensorer.

Ceramic Nanocomposites

Download Ceramic Nanocomposites PDF Online Free

Author :
Publisher : Elsevier
ISBN 13 : 0857093495
Total Pages : 617 pages
Book Rating : 4.8/5 (57 download)

DOWNLOAD NOW!


Book Synopsis Ceramic Nanocomposites by : Rajat Banerjee

Download or read book Ceramic Nanocomposites written by Rajat Banerjee and published by Elsevier. This book was released on 2013-07-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic nanocomposites have been found to have improved hardness, strength, toughness and creep resistance compared to conventional ceramic matrix composites. Ceramic nanocomposites reviews the structure and properties of these nanocomposites as well as manufacturing and applications.Part one looks at the properties of different ceramic nanocomposites, including thermal shock resistance, flame retardancy, magnetic and optical properties as well as failure mechanisms. Part two deals with the different types of ceramic nanocomposites, including the use of ceramic particles in metal matrix composites, carbon nanotube-reinforced glass-ceramic matrix composites, high temperature superconducting ceramic nanocomposites and ceramic particle nanofluids. Part three details the processing of nanocomposites, including the mechanochemical synthesis of metallic–ceramic composite powders, sintering of ultrafine and nanosized ceramic and metallic particles and the surface treatment of carbon nanotubes using plasma technology. Part four explores the applications of ceramic nanocomposites in such areas as energy production and the biomedical field.With its distinguished editors and international team of expert contributors, Ceramic nanocomposites is a technical guide for professionals requiring knowledge of ceramic nanocomposites, and will also offer a deeper understanding of the subject for researchers and engineers within any field dealing with these materials. - Reviews the structure and properties of ceramic nanocomposites as well as their manufacturing and applications - Examines properties of different ceramic nanocomposites, as well as failure mechanisms - Details the processing of nanocomposites and explores the applications of ceramic nanocomposites in areas such as energy production and the biomedical field

Ceramics Science and Technology, Volume 3

Download Ceramics Science and Technology, Volume 3 PDF Online Free

Author :
Publisher : John Wiley & Sons
ISBN 13 : 3527631968
Total Pages : 554 pages
Book Rating : 4.5/5 (276 download)

DOWNLOAD NOW!


Book Synopsis Ceramics Science and Technology, Volume 3 by : Ralf Riedel

Download or read book Ceramics Science and Technology, Volume 3 written by Ralf Riedel and published by John Wiley & Sons. This book was released on 2011-12-15 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although ceramics have been known to mankind literally for millennia, research has never ceased. Apart from the classic uses as a bulk material in pottery, construction, and decoration, the latter half of the twentieth century saw an explosive growth of application fields, such as electrical and thermal insulators, wear-resistant bearings, surface coatings, lightweight armour, or aerospace materials. In addition to plain, hard solids, modern ceramics come in many new guises such as fabrics, ultrathin films, microstructures and hybrid composites. Built on the solid foundations laid down by the 20-volume series Materials Science and Technology, Ceramics Science and Technology picks out this exciting material class and illuminates it from all sides. Materials scientists, engineers, chemists, biochemists, physicists and medical researchers alike will find this work a treasure trove for a wide range of ceramics knowledge from theory and fundamentals to practical approaches and problem solutions.

The Metallurgy of Zirconium

Download The Metallurgy of Zirconium PDF Online Free

Author :
Publisher :
ISBN 13 : 9781258715175
Total Pages : 794 pages
Book Rating : 4.7/5 (151 download)

DOWNLOAD NOW!


Book Synopsis The Metallurgy of Zirconium by : Benjamin Lustman

Download or read book The Metallurgy of Zirconium written by Benjamin Lustman and published by . This book was released on 2013-05 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributing Authors Include H. Etherington, R. C. Dalzell, D. W. Lillie And Others.

Cold Gas Dynamic Spray

Download Cold Gas Dynamic Spray PDF Online Free

Author :
Publisher : CRC Press
ISBN 13 : 1466584432
Total Pages : 342 pages
Book Rating : 4.4/5 (665 download)

DOWNLOAD NOW!


Book Synopsis Cold Gas Dynamic Spray by : Roman Gr. Maev

Download or read book Cold Gas Dynamic Spray written by Roman Gr. Maev and published by CRC Press. This book was released on 2016-04-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your Guide to Advanced Cold Spray TechnologyCold Gas Dynamic Spray centers on cold gas dynamic spray (or cold spray-CS) technology, one of the most versatile thermal spray coating methods in materials engineering, and effectively describes and analyzes the main trends and developments behind the spray (coating) techniques. The book combines theory