Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Handbook On Agro Based Industries 2nd Revised Edition
Download Handbook On Agro Based Industries 2nd Revised Edition full books in PDF, epub, and Kindle. Read online Handbook On Agro Based Industries 2nd Revised Edition ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Handbook on Agro Based Industries (2nd Revised Edition) by : NPCS Board
Download or read book Handbook on Agro Based Industries (2nd Revised Edition) written by NPCS Board and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2012-10-01 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: (LIMITED EDITION- ONLY PHOTOSTAT COPY AVAILABLE) The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad based development of the agro products industry will improve both the social and physical infrastructure of India. India is one of the largest producers of food, and is the second largest producer of rice, wheat, fruits, and vegetables in the world. Nearly 70% of the population depend on agriculture and agro-based industries. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The agro industry mainly comprises of the post harvest activities of processing and preserving agricultural products for intermediate or final consumption. It is a well recognized fact across the world, particularly in the context of industrial development that the importance of agro industries is relative to agriculture increases as economies develop. It should be emphasized that food is not just produce. Food also encompasses a wide variety of processed products. It is in this sense that the agro-industry is an important and vital part of the manufacturing sector in developing countries and the means for building industrial capacities. Some of the fundamentals of the book are Aloe Vera juice, gel and powder, Coconut oil, Banana Powder, Charcoal from rice husk, Disposal plates from banana leaves, Drumstick powder, Ginger products, Mango pickles etc. A complete hand book covering most profitable agro based industries and contains profile on each industry has been presented with great efforts & care.
Author :NIIR Board of Consultants & Engineers Publisher :ASIA PACIFIC BUSINESS PRESS Inc. ISBN 13 :8178331675 Total Pages :496 pages Book Rating :4.1/5 (783 download)
Book Synopsis The Complete Technology Book on Soaps (2nd Revised Edition) by : NIIR Board of Consultants & Engineers
Download or read book The Complete Technology Book on Soaps (2nd Revised Edition) written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2016-04-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soap is the traditional washing compound made from oil fats and caustic alkali. It is an item of daily necessity as cleaning agent. There are few specialty soaps like the washing soaps, castile soaps, sandal soap, specially flavored soaps, medicated soaps, toilet soaps and baby soaps. Population growth, especially households with children has a proportional impact on the growth of the manufacturing sector of the industry. The soap industry is vivacious, varied, creative and tricky, and has the prospective to provide a gratifying career. With increasing popularity there has been increase in potential competitors but it still has the opportunity of further exploitation. Today with increase in disposable incomes all around the world, demand for these products expected to increase because consumers are moving up towards premium products. With increasing awareness of hygienic standards, the market for the Soap is growing at a rate higher than 8% annually. People have become more creative in trying to find new ways in which they can make soap either for domestic use or commercial purposes. This book will provide all the basic facts and information you need to get started. You will be able to slowly build your way up to completely master the art of soap making. The book contains processes formulae, Photographs of Plant & Machinery with Supplier’s Contact Details, Addresses of Raw Material Suppliers and providing information regarding manufacturing method of different washing and toilet soaps. Some of the fundamentals of the book are raw material oil and fats, fatty acids, manufacture of soap products, technology of soap manufacturing, various formulations of soaps, soap perfumery, management of soap factories, analytical methods. This book will be a mile stone for its readers who are new to this sector, will also find useful for professionals, entrepreneurs, those studying and researching in this important area.
Book Synopsis The Complete Book on Cultivation and Manufacture of Tea (2nd Revised Edition) by : H. Panda
Download or read book The Complete Book on Cultivation and Manufacture of Tea (2nd Revised Edition) written by H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2016-03-08 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tea is one of the most popular beverages that are being consumed all over the world. Tea is known as a soothing drink and a way of life. Owing to its increasing demand, tea is considered to be one of the major components of world beverage market. Tea is very beneficial for health and is also known as anticarcinogenic properties. Green tea acts as an antiviral agent. Growing tea requires sufficient amount of work and there is additional level of work that must be incorporated to harvest it. Tea is cultivated in tropical and sub tropical regions. There are various kinds of tea such as black tea, green, oolong tea that can be obtained from real tea plant, Camellia sinensis. The making of different varieties of tea mainly depends upon plucking and rolling, spreading, storing process. The handbook describes aspects of tea cultivation, ranging from the history of old crop, machinery & equipment for various Tea, biological control, organic tea- and many more. This is a sincere attempt to open up the world of this wonderful beverage, its cultivation methods, types of tea available worldwide, manufacturing process, to the common man. Some of the fundamentals of the book are growth of tea in other countries, tea in Indian economy, biochemical constituents, pharmacological properties, selection, pollination and propagation, nutritional requirements, growth, photosynthesis and respiration, nursery management, water theory, oxidative degradation of protein, biological effect of polyphenols, analysis of tea, tea processing, green tea processing, tea bag production etc. This book will be a mile stone for its readers who are new to this sector, will also find useful for entrepreneurs, tea scientists and tea research establishments.
Book Synopsis Herbal Cosmetics Handbook (3rd Revised Edition) by : H Panda
Download or read book Herbal Cosmetics Handbook (3rd Revised Edition) written by H Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2015-04-09 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cosmetics have been in utilization for more than thousands years. More commonly known as make- up, it includes a host of skin products like foundation, lip colors etc. The international market for skincare and color cosmetics surpassed a sale of 53 billion dollars in 2002. The quantity and number of latest products brought to market both nationally and internationally continues to develop at a fast pace. Cosmetic chemists all the time are looking for attractive and striking material that enhances skin's appearance and healthiness. A huge collection of compounds is required to supply these products. The newest edition of the Cosmetics Toiletries and Fragrance Association (CTFA) Dictionary displays more than 10,000 raw materials and the list continues to increase with every year hundreds of new ingredients being added. The cosmetic chemistry has encompasses a vast area of study and one such is Herbal Cosmetics. Herbal cosmetics are the product of cosmetic chemistry, a science that combines the skills of specialists in chemistry, physics, biology, medicine and herbs. Since cosmetics are applied mostly to the skin, hair and nails, a brief description of the anatomy of these is desirable. Herbal cosmetic major users are girls and women who are very much peculiar about their skin type and requirement. Synthetic cosmetic being harsh and prone to more side- effects, herbal cosmetic is quickly replacing it and gaining a lot of popularity. As a result it has created an enormous market for itself both domestic as well as export market. Herbal Cosmetics Handbook has been featured as best seller. The book contains formulae, manufacturing processes of different herbal cosmetics like cosmetics for skin, nails, hair etc. It also covers analysis method of cosmetics, toxicity and test method. Some of the chapters of the book are: Classification of cosmetics Economic aspects, Cosmetic Emulsions, Cosmetics for the skin, Cosmetic Creams, Lubricating or Emollient Creams-Night Creams, Skin Protective and Hand Creams, Vanishing Creams-Foundation Creams, Liquid Creams, Cosmetic Lotions, Hand Lotions, Skin Toning Lotions-Skin Fresheners, Astringent Lotions, Hair Tonics and many more. The book will render useful purpose for new entrepreneurs, technologists, professionals, researchers and for those who want to extend their knowledge in the said field.
Author :NIIR Board of Consultants & Engineers Publisher :ASIA PACIFIC BUSINESS PRESS Inc. ISBN 13 :8178331756 Total Pages :624 pages Book Rating :4.1/5 (783 download)
Book Synopsis The Complete Book on Glass and Ceramics Technology (2nd Revised Edition) by : NIIR Board of Consultants & Engineers
Download or read book The Complete Book on Glass and Ceramics Technology (2nd Revised Edition) written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2017-04-09 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramics also known as fire clay is an inorganic, non-metallic solid article, which is produced by the art or technique of heat and subsequent cooling. The ceramics industry in India came into existence about a century ago and has matured over time to form an industrial base. From traditional pottery making, the industry has evolved to find its place in the market for sophisticated insulators, electronic and electrical items. The ceramic industry has been modernizing continuously, by newer innovations in product design, quality etc. Glass is an inorganic product typically produced by melting a mixture of silica, soda and calcium compound with desired metallic oxides that serves as coloring agents. Indian glass industry will increase on the sidelines of real estate growth across retail, residential and office estate. Glass production involves the fusion of several inorganic substances. These various substances include products such as silica sand, soda ash, dolomite and limestone, representing together 99% of all the raw materials, excluding recycled glass. Glass-ceramics are mostly produced in two steps: First, a glass is formed by a glass-manufacturing process. The glass is cooled down and is then reheated in a second step. In this heat treatment the glass partly crystallizes. In most cases nucleation agents are added to the base composition of the glass-ceramic. These nucleation agents aid and control the crystallization process. Glass-ceramics are fine-grained polycrystalline materials formed when glasses of suitable compositions are heat treated and thus undergo controlled crystallization to the lower energy, crystalline state. It is important to emphasize a number of points in this statement on glass ceramics.Glass ceramics has helped the electronics industry build much smaller and highly efficient transistors, leading to advances in all types of devices. The book covers almost all important aspects of Glass and Ceramic Industry: Properties, Applications, Manufacturing, Processing and Photographs of Plant &Machinery with Supplier’s Contact Details. The major contents of the book are types of glasses, silicate glasses, boric oxide and borate glasses, phosphorus pentoxide and phosphate glasses, germanium dioxide and germanate glasses, titanate glasses, nitrate glasses, glasses based on water, halide glasses, modern glass working, monax and pyrex glass, electric welding, photo electric cells, glassy metals, analysis of glass, glass ceramics, ceramics as electrical materials, analysis of ceramics etc. The book will be useful to the consultants, technocrats, research scholars, libraries and existing units and new entrepreneurswho will find a good base to work further in this field.
Book Synopsis Herbal Cosmetics & Ayurvedic Medicines (EOU) (3rd Revised Edition) by : P. K. Chattopadhyay
Download or read book Herbal Cosmetics & Ayurvedic Medicines (EOU) (3rd Revised Edition) written by P. K. Chattopadhyay and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2013-02-07 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Herbal cosmetics have been into usage from time immemorial so has been the use of Ayurvedic medicines. Ayurveda which means the complete knowledge for long life has been very popular these days on account of its minimum or zero side effects with considerable power of curing. Similarly herbal cosmetics have been of great value because of the least harm they cause to the skin and the radiance they add to the skin. These days a number of beauty products that are using the herbal formulae and Ayurveda concepts have got lot of attention and have been witnessing a huge rise in demand not only nationally but on international arena. The charm of understanding herbal product is even you can use it by making certain combination at your home and get the benefits. These are economical and sure to provide alleviate the problems not only for skin but for long term health issues also. Herbal products combine the skills of specialists in chemistry, physics, biology, medicine and herbs. These are less likely to cause any damaging effect to health. Bath and beauty products use herbs for both their scents and therapeutic qualities. Herbal products are replacing the synthetics products because of its harsh nature. Herbal products are in huge demand in the developed world for health care for the reason that they are efficient, safe and have lesser side effects. The formulations based on herbs are safe and effective. To exploit the knowledge that has got the genesis in our country the book aims to provide you a comprehensive information on different types of herbal Cosmetics formulas. The contents of the book are: Analysis of Creams, Infra-Red Spectrophotometer In Cosmetic Analysis, Infra Red Spectrophotometer In Cosmetic Analysis, Analysis of Creams, Analysis of Shampoos, Lal Tooth Powder, Bath and Massage Oil, Sun Care/Skin Lightening Compound, Herbal Liver Tonic, Vicks Like Compound, hair oil, Eye Drops, Packaging Criteria for Cosmetics and Toiletries, Vicks Like Compound, Cosmetics for Elderly People, Cough Syrup, Colour in Cosmetics, Herbal Liver Tonic, Herbal Formulation, Medicinal Herbs as Cosmetics, Medicinal & Massage Oils, Herbal Cosmetic Cream for Dry Skin, Herbal Deodorant Roll On, Drug Standardization, Guide Lines on GMP, Premises and Equipment Requirements, Aloe Gel, Tablets and Capsule, Sandalwood Oil and Machinery Section. The Third Revised Edition of Herbal cosmetics and Ayurvedic medicines (EOU) also includes photographs of machinery and equipments with addresses of their manufacturers. The book in general will be beneficial for entrepreneurs, industrialists, project consultants, libraries and in general all those looking for detail information.
Book Synopsis Handbook on Natural Dyes for Industrial Applications (Extraction of Dyestuff from Flowers, Leaves, Vegetables) 2nd Revised Edition by : Dr. Padma S Vankar
Download or read book Handbook on Natural Dyes for Industrial Applications (Extraction of Dyestuff from Flowers, Leaves, Vegetables) 2nd Revised Edition written by Dr. Padma S Vankar and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2016-04-09 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dyeing is the process of imparting colors to a textile material. Natural dyes are friendly and satisfying to use. They are obtained from sources like flowers, leaves, insects, bark roots etc. however, they are not readily available and involve an extraction process. With the advancement of chemical industry, all finishing procedures of textile materials have been growing constantly and, sustainable and ecological production techniques have become extremely crucial. This is a single book which has information related to extraction of dyestuff from 19 common flowers, weeds, bark or leaves and its application on cotton silk and wool fabrics for textile industry. The Handbook describes the step wise methodology of extraction, mordanting, dyeing with photos of the actual plants part used for extraction of Natural dye. Shade cards have been incorporated so that the full gamut of colors can be visualized from each dyestuff. Major contents of the book are nature of material to be dyed, history of natural dyes, promotion of natural dyes, sources of natural dyes, mordanting the textiles for natural dyeing, quality standards for vegetable dyes, methods of dye extraction, dyeing methodology, chemistry of dye, some recent publications on natural dyes. This handbook is designed for use by everyone engaged in the natural dye manufacturing and explains different methods of dye extraction. Also contains addresses of machinery suppliers with their photographs. It will be a standard reference book for professionals, entrepreneurs, those studying and researching in this important area. About Author The Author Dr. Padma S Vankar, works as Principal Research Scientist, in Facility for Ecological and Analytical Testing (FEAT) at Indian Institute of Technology, Kanpur. She has been engaged in the screening and characterization of newer natural dyes for the past 10 years. She also works in the area of designing synthetic strategies for Eco-friendly dyes using microwave heating system. Using innovative technology for natural dyeing has been her main emphasis. The author has conducted several workshops throughout India in order to popularize natural dyeing.
Book Synopsis Detailed Project Profiles on Hi-Tech Plastic Products (2nd Revised Edition) by : NPCS Board of Plastic Technologists
Download or read book Detailed Project Profiles on Hi-Tech Plastic Products (2nd Revised Edition) written by NPCS Board of Plastic Technologists and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2014-02-07 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic is a polymeric material that has the capability of being molded or shaped, usually by the application of heat and pressure. This property of plasticity, often found in combination with other special properties such as low density, low electrical conductivity, transparency, and toughness, allows plastics to be made into a great variety of products. Many of the chemical names of the polymers employed as plastics have become familiar to consumers, although some are better known by their abbreviations or trade names. Thus, polyethylene terephthalate and polyvinyl chloride are commonly referred to as PET and PVC, while foamed polystyrene and polymethyl methacrylate are known by their trademarked names, Styrofoam and Plexiglas (or Perspex). The plastic consumption will increase to 20 million tonnes a year in 2020 from the current 8 million tonnes a year in India. Plastics is one of the biggest contributor to India’s GDP with the growth rate of 12%-15% per annum, it houses over 50,000 manufacturers and employees of over 40 lakh workers in the plastics industry. Polymers are chemical compounds whose molecules are very large, often resembling long chains made up of a seemingly endless series of interconnected links. The size of these molecules, as is explained in chemistry of industrial polymers, is extraordinary, ranging in the thousands and even millions of atomic mass units. Polymers have found uses in all spheres of life with demand for better materials, greater functional utility, more economical packaging and versatile and durable all-weather products. The per capita consumption of polymers in India is around 5.5 kg. The Government of India has prepared an ambitious plan to achieve a ten-fold increase in plastic exports (from $ 25 mn to 250 mn) to the US. Polyethylene terephthalate is a thermoplastic polymer resin of the polyester family and is used in synthetic fibers; beverage, food and other liquid containers; thermoforming applications; and engineering resins often in combination with glass fiber. PET in its natural state is a colorless, semi-crystalline resin. Based on how it is processed, PET can be semi-rigid to rigid, and it is very lightweight. It makes a good gas and fair moisture barrier, as well as a good barrier to alcohol and solvents. Poly (vinyl chloride), is the third-most widely produced polymer, after polyethylene and polypropylene. PVC comes in two basic forms: rigid (sometimes abbreviated as RPVC) and flexible. The rigid form of PVC is used in construction for pipe and in profile applications such as doors and windows. It is also used for bottles, other non-food packaging, and cards (such as bank or membership cards). It can be made softer and more flexible by the addition of plasticizers, the most widely used being phthalates. Around 1.1 Million Metric Tons, out of which, Polyvinyl chloride (PVC) accounts for 0.36 Million Metric Tons, Polypropylene (PP) 0.27 Million Metric Tons and Polyethylene (PE) 0.46 Million Metric Tons. The quantum of imports increased further to 1.8 MMT with imports of Polyvinyl chloride (PVC), Polypropylene (PP) and Polyethylene (PE) rising to 0.70, 0.43 and 0.62 MMT. Replicating the growth in gross domestic product, polymer demand in India grew from 3.459 Million Metric ton per annum (MMtpa) in 2000 to 9.013 MMtpa in 2011 at a Compound Annual Growth Rate (CAGR) of 9.1%. Strong growth in the packaging sectors will drive the demand further to 14.315 MMtpa in 2016. To meet this growing demand, India increased its polymer production from 3.568 MMtpa in 2000 to 7.377 MMtpa in 2016. With an increase in demand the polymer consumption is expected to double by 2020, to about 20 million metric tons. Disposable is the ability of something to be disposed of or thrown away after use. A disposable (also called disposable product) is a product designed for a single use after which it is recycled or is disposed as solid waste. The term often implies cheapness and short-term convenience rather than medium to long-term durability. Polystyrene is a synthetic aromatic polymer made from the monomer styrene. Polystyrene can be solid or foamed. General purpose polystyrene is clear, hard, and rather brittle. It is an inexpensive resin per unit weight. It is a rather poor barrier to oxygen and water vapor and has a relatively low melting point. Polystyrene is one of the most widely used plastics, the scale of its production being several billion kilograms per year. India is growing at an average annual rate of 7.6% for the past five years and it is expected to continue growing at an equal if not faster rate. The rapid economic growth is increasing and enhancing employment and business opportunities and in turn increasing disposable incomes. As households with disposable incomes from Rs 200,000 to 1,000,000 a year comprises about 50 million people, roughly 5% of the population at present. By 2025 the size of middle class will increase to about 583 million people, or 41% of the population. The size of the Indian medical device industry will jump to INR 761 billion by 2017 registering a CAGR of 20% during 2012-17. The content of the book includes information about plastic. The major contents of this book are project profiles of projects like Plastics and Polymers Industry in India, Disposable Plastic Syringes, Flexible Polyurethane Foam, PVC Wires & Cables, Disposable Dishes, Knife, Fork & Cutlery Items (Spoon)Thermacol Cups, Glass and Plates, Pet Bottle from Pet Resin, PVC Flex Banner (Front Lit, Backlit & Vinyl),Wood Plastic Composite (WPC),HDPE/PP Woven Sacks, Pet Bottle Recycling, Plastic Injection, Moulded Products (Buckets, Tumblers, Tubs & Toilet Bowl Cleaning Brush),Disposable Plastic Cups, Plates & Glasses. Project profile contains information like introduction, uses and applications, properties, manufacturing process, B.I.S. specifications, raw material details, process description, process flow diagram, suppliers of plant & machinery, suppliers of raw material, land & building, plant & machinery, fixed capital, working capital requirement/month, total working capital/month, cost of project, rate of return, breakeven point (B.E.P) This book is very useful for new entrepreneurs, technical institutions, existing units and technocrats.
Author :NIIR Board of Consultants & Engineers Publisher :ASIA PACIFIC BUSINESS PRESS Inc. ISBN 13 :8178330385 Total Pages :880 pages Book Rating :4.1/5 (783 download)
Book Synopsis The Complete Book on Spices & Condiments (with Cultivation, Processing & Uses) 2nd Revised Edition by : NIIR Board of Consultants & Engineers
Download or read book The Complete Book on Spices & Condiments (with Cultivation, Processing & Uses) 2nd Revised Edition written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2006-04-01 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: The term spices and condiments applies to such natural plant or vegetable products and mixtures thereof, used in whole or ground form, mainly for imparting flavor, aroma and piquancy to foods and also for seasoning of foods beverages like soups. The great mystery and beauty of spices is their use, blending and ability to change and enhance the character of food. Spices and condiments have a special significance in various ways in human life because of its specific flavours, taste, and aroma. Spices and condiments play an important role in the national economies of several spice producing, importing and exporting countries. India is one of the major spice producing and exporting countries. Most of the spices and herbs have active principles in them and development of these through pharmacological and preclinical and clinical screening would mean expansion of considerable opportunities for successful commercialization of the product. Spices can be used to create these health promoting products. The active components in the spices phthalides, polyacetylenes, phenolic acids, flavanoids, coumarines, triterpenoids, serols and monoterpenes are powerful tools for promoting physical and emotional wellness. India has been playing a major role in producing and exporting various perennial spices like cardamoms, pepper, vanilla, clove, nutmeg and cinnamon over a wide range of suitable climatic situations. To produce good quality spice products, attention is required not only during cultivation but also at the time of harvesting, processing and storing. Not as large as in the days when, next to gold, spices were considered most worth the risk of life and money. The trade is still extensive and the oriental demand is as large as ever. Some of the fundamentals of the book are definition of spices and condiments nomenclature or classification of spices and condiments, Indian central spices and cashew nut committee, origin, properties and uses of spices, forms, functions and applications of spices, trends in the world of spices, yield and nutrient uptake by some spice crops grown in sodic soil, tissue culture and in vitro conservation of spices, in vitro responses of piper species on activated charcoal supplemented media, soil agro climatic planning for sustainable spices production, potentials of biotechnology in the improvement of spice crops, medicinal applications of spices and herbs, medicinal properties and uses of seed spices, effect of soil solarization on chillies, spice oil and oleoresin from fresh/dry spices etc. The present book contains cultivation, processing and uses of various spices and condiments, which are well known for their multiple uses in every house all over world. The book is an invaluable resource for new entrepreneurs, agriculturists, agriculture universities and technocrats.
Book Synopsis Surfactants, Disinfectants, Cleaners, Toiletries, Personal Care Products Manufacturing and Formulations (2nd Revised Edition) by : NPCS Board of Consultants & Engineers
Download or read book Surfactants, Disinfectants, Cleaners, Toiletries, Personal Care Products Manufacturing and Formulations (2nd Revised Edition) written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2018-05-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surfactants, Disinfectants, Cleaners, Toiletries, Personal Care Products Manufacturing and Formulations (Phenyl, Naphthalene Ball, Mosquito Coil, Floor Cleaner, Glass Cleaner, Toilet Cleaner, Utensil Cleaning Bar, Liquid Detergent, Detergent Powder, Detergent Soap, Liquid Soap, Handwash, Hand Sanitizer, Herbal Shampoo, Henna Based Hair Dye, Herbal Cream, Shaving Cream, Air Freshener, Shoe Polish, Tooth Paste) (2nd Revised Edition) The term surfactant comes from the words surface active agent. A surfactant is briefly defined as a material that can greatly reduce the surface tension of water when used in very low concentrations. These are one of many different compounds that make up a detergent. They are added to remove dirt from skin, clothes and household articles particularly in kitchens and bathrooms. They are also used extensively in industry. A disinfectant or agent that frees from infection is ordinarily a chemical agent which kills disease germs or other harmful microorganisms and is applied to inanimate objects. The specific way in which a disinfectant agent is used is dependent on both the desired objective and the infectious agent present. Growing emphasis on health, safety and sanitation is fuelling demand for disinfectants & surfactants across industries such as food processing, healthcare and consumer. Personal care industry in India is very huge and is one of the main key drivers for Indian surfactants market. Surfactants industry has a large market for consumer products. This handbook contains processes formulae of various products and providing information regarding manufacturing method. It covers raw material suppliers, photographs of plant & Machinery with supplier’s contact details and some plant layout & process flow sheets. The Major Contents of the book are phenyl, floor cleaner, glass cleaner, toilet cleaner, mosquito coils, liquid detergent, detergent powder, detergent soap, naphthalene balls, air freshener, shoe polish, tooth paste, shaving cream, liquid soaps and handwashes, herbal shampoo, heena based hair dye, herbal creams, utensil cleaning bar, hand sanitizer etc. It will be a standard reference book for professionals, entrepreneurs,those studying and researching in this important area and others interested in the field of surfactants, disinfectants, cleaners, toiletries, personal care products manufacturing.
Author :NPCS Board of Consultants & Engineers Publisher :ASIA PACIFIC BUSINESS PRESS Inc. ISBN 13 :8194099528 Total Pages :448 pages Book Rating :4.1/5 (94 download)
Book Synopsis The Complete Book on Organic Farming and Production of Organic Compost by : NPCS Board of Consultants & Engineers
Download or read book The Complete Book on Organic Farming and Production of Organic Compost written by NPCS Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2021-04-01 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic farming, composed of organic fertilizers as an integral virtue, continues to remain a lucrative bet for the expanding agricultural industry, in line with growing organic food appeal to consumers as a healthy and ethical choice. Beyond ethics, organic fertilizers are gaining significant traction on account of numerous environmental benefits, such as enhanced soil structure and water conservation. Growing awareness among farmers about the nutritional benefits of plant based and animal based fertilizers and their role in promoting growth of earthworm and other microbiological activities vital for plant growth are fuelling adoption of organic fertilizers. Animal based organic fertilizers are garnering significant traction over plant based variants owing to their good aeration and water retention capabilities that enhance the soil fertility. As consumers today are inclined towards clean labels and seeking transparency in everything they consume, organic has emerged as a promising approach to address these concerns. In light of these beneficial aspects of organic approaches and after gauging the futuristic opportunistic value of organic fertilizers. Increasing health issues such as diabetes, obesity and digestive disorders are also one of the factors driving the growth of the organic food. The increased accessibility of organic food and beverages in retail outlets make it more convenient for consumers to purchase these products. Asia-Pacific is also expected to rapidly increase in CAGR, owing to the changing lifestyles and increase in consumer disposable income. Organic food products and shifting consumer preference towards organic food are among the major factors expected to boost demand for organic food products in India. Growing awareness among the consumers regarding the benefits of organic fertilizers over chemical fertilizers, and increasing awareness among farmers and cultivators towards eco-friendly fertilizers. The escalating demand for organic food products is likely to create a dire need for large scale development of organic fertilizers in the forthcoming years, which in turn will create a wide field of opportunities for stakeholders. Sensing the growing demand for organic fertilizers, market goliaths have shifted their focus on expanding their organic fertilizer produce to capitalize on the growing unmet demand from consumers. The book cover various aspects related to different organic farming and production of organic compost with their agriculture process and also provides contact details of machinery suppliers with equipment photographs and plant layout. A total guide to manufacturing and entrepreneurial success in one of today’s organic farming and compost industry. This book is one-stop guide to one of the fastest growing sectors of the organic farming and compost industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on the commercial production of organic farming and compost. It serves up a feast of how-to information, from concept to purchasing equipment
Book Synopsis Startup Projects for Entrepreneurs: 50 Highly Profitable Small & Medium Industries (2nd Revised Edition) by : NPCS Board of Consultants & Engineers
Download or read book Startup Projects for Entrepreneurs: 50 Highly Profitable Small & Medium Industries (2nd Revised Edition) written by NPCS Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2018-01-02 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first step to initiate planning is to identify a suitable project. To start your own venture you have to decide on many things. Making a choice of the right project is a difficult decision for an entrepreneur and is an imperative decision. There are no set rules to identify a suitable project, though this is one decision on which the success of your entire venture hinges. So, don’t take hasty decisions. Most prospective entrepreneurs tend to display the herd tendency and go for a project, which people have already ventured into. This is not a healthy attitude as success of one in a particular field does not guarantee success of the other. While identifying a suitable project, you should make a SWOT analysis of your own strengths and weaknesses. Startup India Stand up Our Prime Minister unveiled a 19-point action plan for start-up enterprises in India. Highlighting the importance of the Standup India Scheme, Hon’ble Prime minister said that the job seeker has to become a job creator. Prime Minister announced that the initiative envisages loans to at least two aspiring entrepreneurs from the Scheduled Castes, Scheduled Tribes, and Women categories. It was also announced that the loan shall be in the ten lakh to one crore rupee range. A startup India hub will be created as a single point of contact for the entire startup ecosystem to enable knowledge exchange and access to funding. Startup India campaign is based on an action plan aimed at promoting bank financing for start-up ventures to boost entrepreneurship and encourage startups with jobs creation. Startup India is a flagship initiative of the Government of India, intended to build a strong ecosystem for nurturing innovation and Startups in the country. This will drive sustainable economic growth and generate large scale employment opportunities. The Government, through this initiative aims to empower Startups to grow through innovation and design. What is Startup India offering to the Entrepreneurs? Stand up India backed up by Department of Financial Services (DFS) intents to bring up Women and SC/ST entrepreneurs. They have planned to support 2.5 lakh borrowers with Bank loans (with at least 2 borrowers in both the category per branch) which can be returned up to seven years. PM announced that “There will be no income tax on startups’ profits for three years” PM plans to reduce the involvement of state government in the startups so that entrepreneurs can enjoy freedom. No tax would be charged on any startup up to three years from the day of its establishment once it has been approved by Incubator. The next step, after you have selected your project, is to collect all information about it. The most important information is about the potential market of the items you selected. This book aims at providing a thorough understanding and analysis of the 5o highly profitable industrial projects that you can start. It describes formulae, properties, raw materials used and manufacturing processes of different products. Undoubtedly, this book is a gateway leading you to become your own boss. The important projects described in the book are Linear Alkyl Benzene, Soy Flour & Milk Processing, Urea Formaldehyde Resin Adhesive, Toothpaste Production, Gypsum Board, Surgical Absorbent Cotton, Starch Derivatives Production, Wet – blue leather, PVC paste Resin, Saccharin, Sodium Chlorite, Phosphate Fertilizer, Tomato Paste, Paint, Autoclaved Aerated Concrete (AAC Blocks), Carbon Black, Caffeine, Sodium hydrosulfite, Magnesium Sulphate (Fertiliser Grade), TMT Bar, Glass Fibre, Plastic (P.V.C.) Laminated Collapsible Tubes, Complex fertilizers, Copper Powder By Electrolysis Process, Atomized Metal powder, Electro Plating, Activated Carbon from Wood, Rubber Powder from Waste Tyres, Precipitated Calcium Carbonate, PVC Flex Banner Production, Reclamation of Used Engine Oil, Edible Corn Oil, Malt Production, Ethyl Oleate, Wheat Flour Mill, Instant Noodles, Zinc, Castor Oil & Pomace, Garlic Oil and Powder, Silica from Rice Husk, Thermocol Cups, Glass and Plates, Match Box (Automatic Plant), Camphor, LDPE/LLDPE Pouch Films, E-waste recycling, Cattle Feed, Saw Pipe, Polyethylene Wax, Disposable Plastic Syringes, Cement. It will be a standard reference book for professionals and use by everyone who wants to startup as entrepreneur. TAGS business ideas for young entrepreneurs, low cost business ideas, how to start a small business, greatest business ideas for young entrepreneurs, creative ideas for young entrepreneurs, how to start a small scale industry, profitable small business opportunities, small and medium-sized enterprises, best industries for starting a business, requirements and characteristics of successful small and medium, most profitable small businesses, most profitable small scale businesses, profitable small business ideas for small towns, highly profitable small & medium industries for entrepreneurs, best manufacturing business ideas with low investment, low investment manufacturing business ideas, new manufacturing business ideas that can be started with low cost, most profitable manufacturing business to start, money making manufacturing businesses to start, starting a business, profitable small scale manufacturing business ideas, business ideas you can start today, profitable small scale industry in india, small scale manufacturing business ideas, low investment manufacturing business ideas, most profitable small businesses, profitable small scale manufacturing business ideas, profitable small scale industries, types of development of small-scale industry, classification of small scale industries, procedure for starting small scale industries, small-scale and traditional industries, small scale industry projects, processing, book, technology, science, manufacturing, manufacture, production, making, business, idea, ideas, business plan, startup, entrepreneur, industry, industries, produce, technologies, project, opportunities, procedure, applications, methods, evaluation, preparation, uses, products, product, packaging, factory, plant layout, process flow sheet, plant, machinery, supplier, photograph, formula, formulation, formulae, formulas, process, product mix,
Book Synopsis Handbook on Small & Medium Scale Industries (Biotechnology Products) by : Dr. H. Panda
Download or read book Handbook on Small & Medium Scale Industries (Biotechnology Products) written by Dr. H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2017-02-09 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Indian biotechnology industry is one of the fastest growing knowledge-based sectors in India and is expected to play an important role in small & medium enterprises industries. Biotechnology is not just one technology, but many. There are a wide variety of products that the biotechnology field has produced. Biotechnology as well all know, is the field of combination of various fields such as genetics, environmental biology, biochemistry, environmental, general, agriculture, fermentation, etc. Biotechnology has a long history of use in food production and processing. It has helped to increase crop productivity by introducing such qualities as disease resistance and increased drought tolerance to the crops. Biotechnology used in processing of wines, beers, Coffee, Tea, Cabbage and Cucumber, etc. Fermentation is biotechnology in which desirable microorganisms are used in the production of value-added products of commercial importance. The products of fermentation are many: alcohol and carbon dioxide are obtained from yeast fermentation of various sugars. Lactic acid, acetic acid and Organic acid are products of bacteria action; citric acid, D-Gluconic acid, Coffee, Tea, Cabbage & Cucumber and Yeasts are some of the products obtained from fermentation. The worldwide demand for biotech products is the only indication; the speed of its advance is the only set to accelerate. Indian Biotechnology industry is considered as one of the sunrise sectors in India. The industry is divided into five major segments: Bio-Pharma, Bio-Services, Bio-Agri, Bio-Industrial and Bio-Informatics. Biotechnology industry’s growth in India is primarily driven by vaccines and recombinant therapeutics. The biotechnology sector of India is highly innovative and is on a strong growth trajectory. The sector, with its immense growth potential, will continue to play a significant role as an innovative manufacturing hub. The high demand for different biotech products has also opened up scope for the foreign companies to set up base in India. Today in India there are more than 350 Biotechnology companies in India providing employment for over 20,000 scientists. The authors cover different aspects of biotechnology such as production of fermented foods, functional foods, enzymes in food processing. The Book contains production of Wines and Beers, Production of Amino Acids, Lactic Acid, Acetic Acid and Organic Acid, Processing of Coffee, Tea, Cabbage, Cucumber, Yeasts and Photographs of Plant & Machinery with Supplier’s Contact Details. The book provides a better understanding about biotechnology production of value-added products, improve productivity, and enhance product quality in the agro food processing sector. The book is highly recommended to new entrepreneurs, professionals, existing units who wants to start manufacturing business of biotechnology products.
Book Synopsis The Complete Technology Book on Processing, Dehydration, Canning, Preservation of Fruits & Vegetables (Processed Food Industries) 4th Revised Edition by : NIIR Board of Consultants & Engineers
Download or read book The Complete Technology Book on Processing, Dehydration, Canning, Preservation of Fruits & Vegetables (Processed Food Industries) 4th Revised Edition written by NIIR Board of Consultants & Engineers and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2019-10-18 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fruits and vegetables are processed into a variety of products such as juices and concentrates, pulp, canned and dehydrated products, jams and jellies, pickles and chutneys etc. The extent of processing of fruits and vegetables varies from one country to another. The technology for preservation also varies with type of products and targeted market. Owing to the perishable nature of the fresh produce, international trade in vegetables is mostly confined to the processed forms. India is the second largest producer of fruits & vegetables in the world with an annual production of million tonnes. It accounts for about 15 per cent of the world’s production of vegetables. Due to the short shelf life of these crops, as much as 30-35% of fruits and vegetables perish during harvest, storage, grading, transport, packaging and distribution. Hence, there is a need for processing technology of fruits and vegetables to cater the domestic demand. The major contents of the book are procedures for fruit and vegetable preservation, chemical preservation of foods, food preservation by fermentation, preservation by drying, canning fruits, syrups and brines for canning, fruit beverages, fermented beverages, jams, jellies and marmalades, tomato products, chutneys, sauces and pickles, vegetables preparation for processing, vegetable juices, sauces and soups, vegetable dehydration, freezing of vegetables etc. The book also contains sample plant layout and photographs of machinery with supplier’s contact details. A total guide to manufacturing and entrepreneurial success in one of today's most food processing industry. This book is one-stop guide to one of the fastest growing sectors of the food processing industry, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on the commercial production of food processing products. It serves up a feast of how-to information, from concept to purchasing equipment.
Book Synopsis The Complete Technology Book on Asbestos, Cement, Ceramics and Limestone by : Dr. H. Panda
Download or read book The Complete Technology Book on Asbestos, Cement, Ceramics and Limestone written by Dr. H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2016-04-01 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asbestos is the generic term for a group of naturally occurring fibrous minerals with high tensile strength, flexibility, and resistance to thermal, chemical and electrical conditions. Asbestos fibers are of high-tensile strength, flexible, heat and chemical resistance, and good frictional properties. Cement is the most essential raw material in any kind of construction activity. Ceramics also known as fire clay is an inorganic, non-metallic solid article, which is produced by the art or technique of heat and subsequent cooling. Limestone is a sedimentary rock, mainly composed of calcium carbonate (CaCO3). It is the principal source of crushed stone for construction, transportation, agriculture, and industrial uses. Emerging applications in commercial sectors such as asbestos, cement and ceramic are poised to fuel demand in the coming years. Growing demand for limestone in the production of cement as well as in several other chemicals that are used in the production of high-value every-day products offers significant opportunities for growth. Global Limestone consumption is projected to reach 5.7 billion tons and expected to grow at an average annual rate of 4–5% in coming years. Presently, cement production is 330 million tonnes and expected to double to reach almost 550 million tonnes in future. The major contents of the book are asbestos, monitoring and identification of air-borne asbestos, asbestos in industrial applications, asbestos – cement products, non – occupational asbestos emissions and exposures, cements, mortars and concrete, raw materials, additives and fuels for cement, processes of manufacturing of cement, cement based on natural and artificial pozzolanas, fast-setting cements, special portland cements, packing of cement, storages of cement, ceramics, lime & limestone, glass & glass ceramics etc. It describes the manufacturing processes and photographs of plant & machinery with supplier’s contact details. It will be a standard reference book for professionals, entrepreneurs, those studying and researching in this important area and others interested in the field of these industries.
Book Synopsis Handbook on Electroplating with Manufacture of Electrochemicals (Electroplating of Aluminium, Cadmium, Chromium, Cobalt, Copper, Gold, Iron, Lead, Nickel, Bright Nickel, Silver, Alloy, Platinum, Palladium, Rhodium, Bright Zinc, Tin, Plastics, Barrel, Electroless Plating, Metal Treatment with Formulation, Machinery, Equipment Details and Factory Layout) by : Dr. H. Panda
Download or read book Handbook on Electroplating with Manufacture of Electrochemicals (Electroplating of Aluminium, Cadmium, Chromium, Cobalt, Copper, Gold, Iron, Lead, Nickel, Bright Nickel, Silver, Alloy, Platinum, Palladium, Rhodium, Bright Zinc, Tin, Plastics, Barrel, Electroless Plating, Metal Treatment with Formulation, Machinery, Equipment Details and Factory Layout) written by Dr. H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2024-01-01 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroplating and Electrochemicals, industries shimmering with growth and profitability potential, are truly riveting. Electroplating, an intricate process, involves the electrodeposition of a svelte metallic stratum onto diverse substrates utilizing electric currents. This technique entails submerging the intended object, the substrate, into an electrolytic bath brimming with metal ions and, through the application of an electric current, achieves a homogeneous metallic veneer. Conversely, Electrochemicals are birthed from electrochemical reactions. These intricate reactions are characterized by the transference of electrons among distinct compounds within an electrolytic milieu. Through the deliberate orchestration of electron flow, a plethora of chemical reactions are catalyzed, culminating in the synthesis of targeted chemicals. This methodology finds its application across a spectrum of industries, encompassing pharmaceuticals, agriculture, and energy storage sectors. The global electroplating market is expected to grow at a CAGR of 5.5%. The growth in the market can be attributed to the increasing demand for electroplated products from various end-use industries, such as automotive, electrical & electronics, aerospace & defense, Jewellery and machinery parts & components. In addition, the growing awareness about corrosion protection and decorative finishes is also propelling the growth of this market. This book contains in-depth information about Electrochemical Processing, Metal Surface Treatment, Electroless Plating, Electroplating, Electroplating of Aluminium, Cadmium, Chromium, Cobalt, Copper, Gold, Iron, Lead, Nickel, Bright Nickel, Silver, Alloy, Platinum, Palladium, Rhodium, Bright Zinc, Tin, Plastics, Barrel, Zinc Electroplating Brightener, Metal Treatments, Electrodeposition of Precious Metals, Electropolishing of Stainless Steel, Case Hardening, Electroless Coating of (Gold, Silver), Buffing and Industrial Metal Polishing Compounds, Aluminium, Gold and Its Compounds, Complex Salts of (Copper, Silver and Gold), Hydrides of Silicon, Chemical and Electrochemical Conversion Treatments, Electrostatic Sealing. This book is an invaluable resource that comprehensively addresses all the essential topics in Electroplating and Electrochemicals. It is poised to become a standard reference for professionals and entrepreneurs interested in this field, offering a comprehensive understanding of Electroplating. Additionally, it will prove highly beneficial to consultants, new entrepreneurs, technocrats, research scholars, libraries, and existing businesses. The book offers a detailed roadmap that guides readers from the initial concept to the machinery acquisition phase.
Book Synopsis Manufacture of Pan Masala, Tobacco and Tobacco Products. 2nd Revised Edition by : P. K. Chattopadhyay
Download or read book Manufacture of Pan Masala, Tobacco and Tobacco Products. 2nd Revised Edition written by P. K. Chattopadhyay and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2021-05-14 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tobacco comes from a leafy plant that tends to grow in warm tropical areas. It is famously grown all over the Caribbean, where the warm, sunny conditions make for a perfect growing climate. Tobacco is usually smoked as a nicotinic stimulant and is mostly processed, rolled and dried before being smoked. Different geographies produce different types of the plant. The taste and flavor of the leaves are the characteristic trademarks of different types. The process of curing also determines the type of tobacco. Tobacco products include cigarettes, cigars, loose pipe tobacco, chewing tobacco and snuff. These products contain the dried, processed leaves of the tobacco plant nicotiana rustica or nicotiana tabacum. All tobacco contains nicotine, an addictive drug. Today’s tobacco also contains thousands of other chemicals designed to make the products more user-friendly and addictive. Nicotine is a nitrogen-based compound which dissolves in organic compounds. Tobacco leaves contain plenty of nicotine which evaporates on burning. This nitrogen-based compound is addictive in low amounts and toxic in high doses. Nicotine Sulfate is a potent pesticide, known for its high toxicity. A large proportion of Indian economy is agro based in which Tobacco is one of the principal cash crops. The tobacco production and its allied products’ sales in the country have played a prominent role in the development of nation’s economy. India is the largest tobacco market in the world in terms of tobacco consumption. The smokeless tobacco has historically been served as a tradition in India for many decades. Tobacco Waste or dust is generated at various stages of post-harvest processing of tobacco and also while manufacturing various tobacco products mainly during manufacture of tobacco products like cigarette and Beedi. The types of wastes generated during pre and post-harvest practice of tobacco include suckers, stems, mid ribs, leaf waste and dust. The main contents of the book are Tobacco Cultivation, Tobacco Diseases and Pests, Organic Tobacco Production, Chewing Tobacco, Cigarettes, Bidi, Cigars, Readymade Khaini, Chewing Tobacco (Khaini), Zarda, BIS Specifications, Katha, Mouth Fresheners, Pan Chutney, Pan Masala, Kimam, Tobacco of Various Grade, Sweet Supari, Nicotine Sulphate, USP Nicotine, Nicotine Tartarate, Nicotine Polacrilex Resin, Smokeless Tobacco (SLT), Hookah, Tobacco Products Manufacturing Processes, E-Liquid (Main Chemicals, Compounds, Components), Additives in Tobacco Products, Additives Products, Packaging & Labeling (Design Trends & Technologies), Plastics in Food Packaging, Packaging Laws and Regulations and Photographs of Machinery with Supplier’s Contact Details. This book is one-stop guide to one of the fastest growing sector of the Pan Masala, Tobacco and Tobacco Products, where opportunities abound for manufacturers, retailers, and entrepreneurs. This is the only complete handbook on Pan Masala, Tobacco and Tobacco Products. It serves up a feast of how-to information, from concept to purchasing equipment.
