Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Feedstock Recycling And Pyrolysis Of Waste Plastics
Download Feedstock Recycling And Pyrolysis Of Waste Plastics full books in PDF, epub, and Kindle. Read online Feedstock Recycling And Pyrolysis Of Waste Plastics ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Feedstock Recycling and Pyrolysis of Waste Plastics by : John Scheirs
Download or read book Feedstock Recycling and Pyrolysis of Waste Plastics written by John Scheirs and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pyrolysis is a recycling technique converting plastic waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. It allows the treatment of mixed, unwashed plastic wastes. For many years research has been carried out on thermally converting waste plastics into useful hydrocarbons liquids such as crude oil and diesel fuel. Recently the technology has matured to the point where commercial plants are now available. Pyrolysis recycling of mixed waste plastics into generator and transportation fuels is seen as the answer for recovering value from unwashed, mixed plastics and achieving their desired diversion from landfill. This book provides an overview of the science and technology of pyrolysis of waste plastics. It describes the types of plastics that are suitable for pyrolysis recycling, the mechanism of pyrolytic degradation of various plastics, characterization of the pyrolysis products and details of commercially mature pyrolysis technologies. This book also covers co-pyrolysis technology, including: waste plastic/waste oil, waste plastics/coal, and waste plastics/rubber.
Book Synopsis Feedstock Recycling of Plastic Wastes by : Jose Aguado
Download or read book Feedstock Recycling of Plastic Wastes written by Jose Aguado and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastic materials has seen a massive increase in recent years, and generation of plastic wastes has grown proportionately. Recycling of these wastes to reduce landfill disposal is problematic due to the wide variation in properties and chemical composition among the different types of plastics. Feedstock recycling is one of the alternatives available for consideration, and Feedstock Recycling of Plastic Wastes looks at the conversion of plastic wastes into valuable chemicals useful as fuels or raw materials. Looking at both scientific and technical aspects of the recycling developments, this book describes the alternatives available. Areas include chemical depolymerization, thermal processes, oxidation and hydrogenation. Besides conventional treatments, new technological approaches for the degradation of plastics, such as conversion under supercritical conditions and coprocessing with coal are discussed. This book is essential reading for those involved in plastic recycling, whether from an academic or industrial perspective. Consultants and government agencies will also find it immensely useful.
Book Synopsis Sustainable Plastics by : Joseph P. Greene
Download or read book Sustainable Plastics written by Joseph P. Greene and published by John Wiley & Sons. This book was released on 2014-09-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing guidelines for implementing sustainable practices for traditional petroleum based plastics, biobased plastics, and recycled plastics, Sustainable Plastics and the Environment explains what sustainable plastics are, why sustainable plastics are needed, which sustainable plastics to use, and how manufacturing companies can integrate them into their manufacturing operations. A vital resource for practitioners, scientists, researchers, and students, the text includes impacts of plastics including Life Cycle Assessments (LCA) and sustainability strategies related to biobased plastics and petroleum based plastics as well as end-of-life options for petroleum and biobased plastics.
Download or read book Plastics Waste written by Arnold Tucker and published by Smart Publications. This book was released on 2002-01-01 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the issue of converting plastics waste into energy and/or useful chemicals. Much plastic material is discarded as waste, such as packaging and end-of-life vehicle components. This report introduces the different waste management options. It discusses the methods available for treating mixed plastics waste and PVC-rich plastics waste. The emphasis in this report is on technologies which are already being used or assessed for use on a commercial scale. Comparisons are made between the different types of recycling currently available in terms of life cycle assessment and environmental impact. Feedstock recycling is discussed extensively in this review. This report is accompanied by around 400 abstracts from papers in the Rapra Polymer Library database.
Book Synopsis Industrial Wastewater Treatment, Recycling and Reuse by : Vivek V. Ranade
Download or read book Industrial Wastewater Treatment, Recycling and Reuse written by Vivek V. Ranade and published by Butterworth-Heinemann. This book was released on 2014-07-21 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Wastewater Treatment, Recycling and Reuse is an accessible reference to assist you when handling wastewater treatment and recycling. It features an instructive compilation of methodologies, including advanced physico-chemical methods and biological methods of treatment. It focuses on recent industry practices and preferences, along with newer methodologies for energy generation through waste. The book is based on a workshop run by the Indus MAGIC program of CSIR, India. It covers advanced processes in industrial wastewater treatment, applications, and feasibility analysis, and explores the process intensification approach as well as implications for industrial applications. Techno-economic feasibility evaluation is addressed, along with a comparison of different approaches illustrated by specific case studies. Industrial Wastewater Treatment, Recycling and Reuse introduces you to the subject with specific reference to problems currently being experienced in different industry sectors, including the petroleum industry, the fine chemical industry, and the specialty chemicals manufacturing sector. Provides practical solutions for the treatment and recycling of industrial wastewater via case studies Instructive articles from expert authors give a concise overview of different physico-chemical and biological methods of treatment, cost-to-benefit analysis, and process comparison Supplies you with the relevant information to make quick process decisions
Book Synopsis Remediation of Former Manufactured Gas Plants and Other Coal-Tar Sites by : Allen W. Hatheway
Download or read book Remediation of Former Manufactured Gas Plants and Other Coal-Tar Sites written by Allen W. Hatheway and published by CRC Press. This book was released on 2011-07-27 with total page 1398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the 2013 Claire P. Holdredge Awardee for Remediation of Former Manufactured Gas Plants and Other Coal-Tar Sites.This award, first established in 1962 by the Association of Environmental and Engineering Geologists, is named in honor of Claire P. Holdredge, a founding member and the first President of the Association. The award is
Book Synopsis Plastic Waste and Recycling by : Trevor M. Letcher
Download or read book Plastic Waste and Recycling written by Trevor M. Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches
Book Synopsis Plastics Waste Management by : Nabil Mustafa
Download or read book Plastics Waste Management written by Nabil Mustafa and published by CRC Press. This book was released on 1993-04-28 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume discusses the structure and growth of the plastics industry, comprehensively displaying the complete cycle of plastics from raw materials to waste and solutions related to this waste - presenting practical cost scenarios for the collection and disposal of waste.;Examining the issue of plastics waste in a broad social and environmental context, Plastics Waste Management: considers the regulations imposed on waste disposal and aspects of pollution control acts; provides a technical overview of polymers, classifications, and properties as well as the plastics industry, polymer production, and consumption; addresses extrusion basics and polymers' compatibility in a mixture of plastic waste; describes the recycling of mixed plastics waste; and explores design considerations and product life cycles with respect to environmentally friendly products in packaging applications.;Furnishing more than 400 bibliographic citations, Plastics Waste Management is a reference for pollution control, plastics, environmental, polymer and chemical engineers; recycling facility operators; plastics designers; and upper-level undergraduate and graduate students in these disciplines.
Book Synopsis Sustainable Mobility by : Bernardo Llamas
Download or read book Sustainable Mobility written by Bernardo Llamas and published by BoD – Books on Demand. This book was released on 2020-04-22 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of sustainability is already applied in all industrial sectors. The fight against climate change therefore forces us to look for alternatives in the way we move. Different alternative fuels are discussed in this book: from liquid and gaseous biofuels to electricity. Moreover, waste to fuel processes are another option to produce a significant amount of fuels. In the spirit of this book, there is not only collecting different alternatives, but creativity is also promoted in the readers of this book, so that they take an active part of the solution necessary to reduce greenhouse gas emissions.
Book Synopsis Handbook of Plastics Recycling by : Francesco Paolo La Mantia
Download or read book Handbook of Plastics Recycling written by Francesco Paolo La Mantia and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses some of the state-of-the-art techniques of recycling post-consumer plastic materials and focuses on mechanical recycling, chemical recycling and energy recovery. The book is intended for all those who are interested in recycling of post consumer plastic waste. Although, this book discusses technical aspects of recycling, the authors have endeavoured to make this book easily understandable to anyone interested in the subject enabling the reader to gain a thorough grounding in all the subjects discussed.
Book Synopsis Landfill Waste Pollution and Control by : K Westlake
Download or read book Landfill Waste Pollution and Control written by K Westlake and published by Woodhead Publishing. This book was released on 2014-01-29 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a pollution hazard prevalent in most cities and large towns world-wide by providing an understanding of the scientific and technical control of the landfill method of domestic and non-domestic waste disposal, considered within the framework of integrated waste management. Landfill disposal is practised world-wide, and is cheap and convenient but, if poorly managed, poses a serious threat to the environment. This pollution threat is a source of concern to regulating authorities and environmental pressure groups. This comprehensive text reflects the authority of the author’s considerable experience in assessment and remediation of landfill sites, which he has taught in post-graduate courses on hazardous waste management, and in running international programmes on waste and contaminated land-related subjects for industry. Dr. Westlake’s expertise also reflects his work in association with the Environmental Safety Centre at the Harwell Laboratory. Featuring the microbial degradation of waste within landfills, with an understanding of hazards associated with the production, migration and control of landfill gas and leachate, the book also points to the benefits to be obtained from gas production. There is important discussion on the monitoring of potentially dangerous dormant sites, and much helpful advice on trouble shooting. The text is set in the context of regulatory controls and assesses their impact, while at the same time looking at the way forward for waste disposal by landfill. There is coverage of legislative requirements and constraints including those from the European Union reflecting official attitudes. There is growing international consensus that EU regulations can be interpreted and applied as a benchmark in relation to legal practices and attitudes in all countries throughout the world Addresses a pollution hazard prevalent in most cities and large towns world-wide Provides an understanding of the scientific and technical control of the landfill method of domestic and non-domestic waste disposal, considered within the framework of integrated waste management Provides an important discussion on the monitoring of potentially dangerous dormant sites
Book Synopsis Recycling of Solid Waste for Biofuels and Bio-chemicals by : Obulisamy Parthiba Karthikeyan
Download or read book Recycling of Solid Waste for Biofuels and Bio-chemicals written by Obulisamy Parthiba Karthikeyan and published by Springer. This book was released on 2016-08-10 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in and current research perspectives on the field of urban/industrial solid waste recycling for bio-energy and bio-fuel recovery. It chiefly focuses on five main thematic areas, namely bioreactor landfills coupled with energy and nutrient recovery; microbial insights into anaerobic digestion; greenhouse emission assessment; pyrolysis techniques for special waste treatment; and industrial waste stabilization options. In addition, it compiles the results of case studies and solid waste management perspectives from different countries.
Book Synopsis Deactivation And Regeneration Of Zeolite Catalysts by : Guisnet Michel
Download or read book Deactivation And Regeneration Of Zeolite Catalysts written by Guisnet Michel and published by World Scientific Publishing Company. This book was released on 2011-02-21 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: In chemical processes, the progressive deactivation of solid catalysts is a major economic concern and mastering their stability has become as essential as controlling their activity and selectivity. For these reasons, there is a strong motivation to understand the mechanisms leading to any loss in activity and/or selectivity and to find out the efficient preventive measures and regenerative solutions that open the way towards cheaper and cleaner processes. This book covers the fundamental and applied aspects of solid catalyst deactivation in a comprehensive way and encompasses the state of the art in the field of reactions catalyzed by zeolites. This particular choice is justified by the widespread use of molecular sieves in refining, petrochemicals and organic chemicals synthesis processes, by the large variety in the nature of their active sites (acid, base, acid-base, redox, bifunctional) and especially by their peculiar features, in terms of crystallinity, structural order and textural properties, which make them ideal models for heterogeneous catalysis. The aim of this book is to be a critical review in the field of zeolite deactivation and regeneration by collecting contributions from experts in the field which describe the factors, explain the techniques to study the causes and suggest methods to prevent (or limit) catalyst deactivation. At the same time, a selection of commercial processes and exemplar cases provides the reader with theoretical insights and practical hints on the deactivation mechanisms and draws attention to the key role played by the loss of activity on process design and industrial practice./a
Book Synopsis Solid-State Shear Pulverization by : Klementina Khait
Download or read book Solid-State Shear Pulverization written by Klementina Khait and published by CRC Press. This book was released on 2001-04-30 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Preface This book is the first extended look at a new and multifaceted polymer processing technology that has already been discussed in numerous articles. Called Solid-State Shear Pulverization (S3P), this innovative process produces polymeric powders with unique physical properties not found in the output of conventional size-reduction methods.... This technology, which utilizes a pulverizer based on a modified co-rotating twin-screw extruder..., has profound implications for both the creation of new polymer blends and recycling of plastic and rubber waste. Unlike [earlier processes] where polymers are melted prior to pulverization, ...pulverizing mixtures of polymers with the S3P process...does not involve melting. By contrast, S3P maintains polymers in the solid state and avoids the additional heat history that occurs during [other processes], which can be detrimental to the physical properties of pulverized materials. The research and development of the S3P technology...has grown significantly since 1990 from the development of a new plastics recycling process to a much broader polymer processing method that allows intimate mixing of polymers with very different viscosities, sold-state dispersion of additives, including pigments, and continuous production of powder with unique shapes and larger surface areas. Polymeric powders are of growing importance to plastics processors due to the increase use of plastics in various applications, such as rotational molding, powder coatings, and compounding, which require powder as the feedstock. ...[I]t has become clear that this process allows for in-situ compatibilization of dissimilar polymers by applying mechanical energy to cause chemical reactions. This aspect of S3P technology that we describe in this book should [be useful in] developing new polymer blends with the use of pre-made compatibilizing agents. In addition, it has been discovered that S3P efficiently mixes polymer blends with different component viscosities, resulting in the elimination of phase inversion. The S3P process directly produces blends with matrix and dispersed phase morphology like those obtained after phase inversion during a long melt-mixing process. This phenomenon is of practical importance because a long processing time is required by conventional melt-mixing to produce a stable blend morphology. S3P is also advantageous for producing thermoplastic or thermoset powder-coating compounds in a one-step process as opposed to a conventional multi-step operation that involves melt extrusion followed by batch grinding. The major capabilities of this new process can be summarized as follows: o Continuous powder production from plastics or rubber feedstocks o Blending of immiscible polymers o Efficient mixing of polymers with unmatched viscosities o Environmentally friendly recycling of multicolored, commingled plastics waste o Sold-state dispersion of heat-sensitive additives o Engineered plastic/rubber blends Materials and processes well illustrated The text is well illustrated with 60 photographs, micrographs, diagrams and others figures. Here is a small sampling of the captions of these figures. o Particle-size distribution for virgin LDPE powder made with PT-25 pulverizer o Optical photograph of virgin LDPE powder made with PT-25 pulverizer o Layout for a three-stage rubber pulverizer o Flow chart for powder coating production by conventional process and with new S3P technology o SEM image of pulverized virgin PP at 40X (first in series of SEM images of polymer powders) o Optical micrograph of melt-crystallized thin films of unpulverized virgin PP under polarized light o Log of viscosity vs. log shear rate for virgin HDPE after S3P processing o Gel permeation chromatograms (GPC) of polystyrene subjected to S3P processing Color-photo section One of the several functions of Solid-State Shear Pulverization technology is recycling mixed plastic waste. This section of twenty full-color photographs and micrographs illustrates different processed materials, as well as the machinery and mixed waste used. Here is a small sampling of the photo and micrograph captions. o Resultant flake feedstock from granulation o S3P-made uniform powder from feedstock o Flake feedstock of post-consumer HDPE/PP blend (90/10 ratio) o Injection-molded test bar (with translucence) made from S3P powder without pelletization o Injection-molded test bar made from S3P powder without pelletization showing uniform color o Several test bars subjected to tensile testing showing exceptionally high elongation at break Useful reference data in tables More than 60 tables provide useful data in convenient form. Here is a small sampling of table captions. o Physical properties of virgin PP 8020 GU injection-molded from S3P-made powder (first in series of tables on physical properties of various plastics processed from S3P-made powder) o Sieve analysis of powder resulting from S3P of virgin LDPE 509.48 (one of series of tables on sieve analysis of polymer powders) o Melt-flow rate before and after S3P processing for virgin PS and two PP samples o Key physical properties of injection-molded post-consumer polyolefin blends pulverized by S3P process The Authors Klementina Khait, M.S. Ch.E., Ph.D., is Research Associate Professor and Director of the Polymer Technology Center in the Department of Chemical Engineering, Northwestern University. Her industrial experience in polymer science and engineering includes work with Borg-Warner Chemicals and Quantum Chemical Corporation. She received her two advanced degrees, in chemical engineering and polymer chemistry, from the Technological Institute, St. Petersburg, Russia. Dr. Khait holds several patents and has published more than 50 papers in scientific and technical journals. Stephen Carr, Ph.D., is Professor of Materials Science and Engineering and Chemical Engineering at Northwestern University. His industrial work includes work in polymer science and engineering with General Motors Corp. He received a doctorate in polymer science from Case Western Reserve University. He has been on the Northwestern University faculty since 1969. Martin H. Mack is Vice President for R&D with the Berstorff Division of Krauss-Maffei Corporation. He holds an engineering degree from the University of Stuttgart. He has served for more than ten years on the Board of Directors of the Society of Plastics Engineers (SPE).
Book Synopsis Modern Styrenic Polymers by : John Scheirs
Download or read book Modern Styrenic Polymers written by John Scheirs and published by John Wiley & Sons. This book was released on 2003-03-28 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title addresses the latest developments in the field, covering the major advances that have occurred over the past five years in the polymerization and structure of new generation polystyrenes that are broadening its scope of application. It covers the advent of branched polystyrenes, syndiotactic polystyrene, high-molecular weight general purpose PS, styrenic interpolymers, and clear SBS copolymers Presents voluminous research previously only reported at conferences in one reference Unique coverage of a topic not found in the field
Download or read book Polymer Recycling written by John Scheirs and published by John Wiley & Sons. This book was released on 1998-09-16 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an overview of state-of-the-art recycling techniques together with current and potential applications. Presents material that is normally only available in the form of conference proceedings Includes flow charts detailing the recycling process Helps identify the problems encountered in the recycling of polymers Presents pie graphs and photographs of commercial outlets A comprehensive volume which will prove to be invaluable for polymer manufacturers, recyclers and marketers as well as environmental authorities and materials engineers.
Book Synopsis Advances in Construction Materials and Sustainable Environment by : Ashok Kumar Gupta
Download or read book Advances in Construction Materials and Sustainable Environment written by Ashok Kumar Gupta and published by Springer Nature. This book was released on 2021-12-14 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select papers presented at the International Conference on Construction Materials and Environment (ICCME 2020). The topics discussed revolve around the identification and utilization of novel construction materials primarily in the areas of structural engineering, geotechnical engineering, transportation engineering, and environmental engineering. The volume presents a compilation of thoroughly studied and utilized sustainable construction materials in different areas of civil engineering. Newly developed testing methodologies, physical modelling methods, numerical studies, and other latest techniques discussed in this book can prove to be useful for researchers and practitioners across the globe.
