Evaluation Of Binder Aging And Its Influence In Aging Of Hot Mix Asphalt Concrete

Author : Yuan He
Publisher :
ISBN 13 : 9781339825762
Total Pages : pages
Book Rating : 4.8/5 (257 download)

DOWNLOAD NOW!

Download or read book Interaction Between New and Age-hardened Binders in Asphalt Mixes Containing High Quantities of Reclaimed Asphalt Pavement and Reclaimed Asphalt Shingles written by Yuan He and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: As virgin pavement material sources become scarcer and costlier the use of higher quantities of reclaimed asphalt pavement (RAP) and reclaimed asphalt shingles (RAS) in the production of new asphalt mixes becomes increasingly desirable. RAP/RAS binder in the mix has different levels of aging. Through oxidation, the binder becomes stiffer and more rigid than virgin binder, and thus results in a pavement material that is more brittle and susceptible to fatigue and thermal cracking. The purpose of this dissertation study was to investigate the interactions between new and age binders and evaluate asphalt mixes performance. A major concern associated with the use of high percentages of RAP and/or RAS is the level of blending between virgin and age-hardened binders, because the performance of the mix can be highly influenced by the properties of the composite binder. The blending between new binder and age-hardened RAP binder can be explained through diffusion mechanisms. This research used asphalt binder testing and diffusion and aging theory to investigate the evolution of blending between virgin and RAP binders during asphalt mix production, storage, and placement. The rheological properties of a two-layer asphalt binder sample composed of virgin and simulated RAP binder were measured using a dynamic shear rheometer (DSR) after conditioning following hot mix asphalt (HMA) and warm mix asphalt (WMA) time-temperature paths during mixing and placement. The diffusion and aging coefficients for the composite binder were estimated by comparing measured shear stiffness values with those predicted using a diffusion model and considering asphalt binder aging over time. The diffusion model is solved numerically based on the finite control volume approach. Results show that the HMA results in nearly full blending of the new and aged binders following the time-temperature paths used in this study; while the WMA results in only partial blending. Traditionally, the properties of blended binders in asphalt mixes containing RAP and RAS are evaluated through rheological testing of the binder extracted and recovered from a mix. However, this approach has long been criticized for being labor intensive, for potentially altering the chemistry of the binder and consequently changing the binder rheology, for forcing blending of binders that may not have been present in the mix, and for creating hazardous material disposal issues. The research presented in this dissertation proposes an alternative approach for characterizing blended binders by testing the linear viscoelastic properties of a fine aggregate matrix (FAM) asphalt mix using a torsion bar fixture in a DSR. A procedure has been developed for preparation and testing of small FAM cylindrical FAM specimens. The results demonstrated that this testing is sensitive to FAM mixes made of different virgin binders, RAP/RAS contents, with and without rejuvenating agent. More importantly, FAM mix testing shows similar results as that from DSR binder testing and full mix testing in terms of rankings of master curves and Black diagrams. Statistical analysis (ANOVA) on stiffness values from FAM testing also provides the same conclusion to that at binder and mix levels. Therefore, FAM approach has the potential to be used as a substitute to stiffness testing for mix comparison purposes. It is also a less expensive and more efficient testing approach than the full mix testing.The combined effect of RAP, RAS, and different virgin binder sources and grades on performance of the blended binders and asphalt mixes was also investigated. Previous studies have indicated that RAP, RAS, and virgin binder grades each has certain effects on performance of the mix. The addition of RAP/RAS undermines fatigue and thermal performance and improves rutting resistance. The virgin binder grade should be carefully chosen based on the percentages of RAP/RAS in the mix. Results from unconfined RLT appears to show that reducing the binder grade when using more than 25 percent RAP results in rutting performance similar to the original grade. Therefore, it is likely safe for high temperatures if the binder grade is reduced to meet the low and intermediate temperature requirements. Asphalt binders contain different organic molecules, and thus their chemical compositions vary according to the source of the oil used in their production. Virgin binders from different sources blend differently with the age-harden oxidized binder in RAP/RAS. Therefore, depending on the level of blending between virgin and oxidized binders, the performance of the mixes could vary substantially. Findings from this work indicated that virgin binder source had some effect on the blended materials. Additional research that came from the testing approaches to complete the investigation of RAP/RAS with this dissertation were also investigated. All the asphalt mixes used in this study were designed following Caltrans modified Superpave mix design procedure and tested using an Asphalt Mixture Performance Tester (AMPT). The effects of specimen preparation variables in terms of compaction method, compaction level, test temperature, stress state, and deformation measurement location when using the AMPT to predict mix stiffness and permanent deformation were evaluated. The best approach using Superpave testing equipment that appears to best characterize expected rutting performance as defined by previous calibrated RSCH results were also investigated.