Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Design Optimisation And Validation Of Phononic Crystal Plates For Manipulation Of Elastodynamic Guided Waves
Download Design Optimisation And Validation Of Phononic Crystal Plates For Manipulation Of Elastodynamic Guided Waves full books in PDF, epub, and Kindle. Read online Design Optimisation And Validation Of Phononic Crystal Plates For Manipulation Of Elastodynamic Guided Waves ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Design Optimisation and Validation of Phononic Crystal Plates for Manipulation of Elastodynamic Guided Waves by : Saeid Hedayatrasa
Download or read book Design Optimisation and Validation of Phononic Crystal Plates for Manipulation of Elastodynamic Guided Waves written by Saeid Hedayatrasa and published by Springer. This book was released on 2018-01-09 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis proposes novel designs of phononic crystal plates (PhPs) allowing ultra-wide controllability frequency ranges of guided waves at low frequencies, with promising structural and tunability characteristics. It reports on topology optimization of bi-material-layered (1D) PhPs allowing maximized relative bandgap width (RBW) at target filling fractions and demonstrates multiscale functionality of gradient PhPs. It also introduces a multi-objective topology optimization method for 2D porous PhPs allowing both maximized RBW and in-plane stiffness and addresses the critical role of considering stiffness in designing porous PhPs. The multi-objective topology optimization method is then expanded for designing 2D porous PhPs with deformation induced tunability. A variety of innovative designs are introduced which their maximized broadband RBW is enhanced by, is degraded by or is insensitive to external finite deformation. Not only does this book address the challenges of new topology optimization methods for computational design of phononic crystals; yet, it demonstrated the suitability and applicability of the topological designs by experimental validation. Furthermore, it offers a comprehensive review of the existing optimization-based approaches for the design of finite non-periodic acoustic metamaterial structures, acoustic metamaterial lattice structures and acoustic metamaterials under perfect periodicity.
Book Synopsis State-of-the-Art Materials Science in Belgium 2017 by : Dirk Poelman
Download or read book State-of-the-Art Materials Science in Belgium 2017 written by Dirk Poelman and published by MDPI. This book was released on 2018-10-17 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "State-of-the-Art Materials Science in Belgium 2017" that was published in Materials
Book Synopsis The Scaled Boundary Finite Element Method by : Chongmin Song
Download or read book The Scaled Boundary Finite Element Method written by Chongmin Song and published by John Wiley & Sons. This book was released on 2018-06-19 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: An informative look at the theory, computer implementation, and application of the scaled boundary finite element method This reliable resource, complete with MATLAB, is an easy-to-understand introduction to the fundamental principles of the scaled boundary finite element method. It establishes the theory of the scaled boundary finite element method systematically as a general numerical procedure, providing the reader with a sound knowledge to expand the applications of this method to a broader scope. The book also presents the applications of the scaled boundary finite element to illustrate its salient features and potentials. The Scaled Boundary Finite Element Method: Introduction to Theory and Implementation covers the static and dynamic stress analysis of solids in two and three dimensions. The relevant concepts, theory and modelling issues of the scaled boundary finite element method are discussed and the unique features of the method are highlighted. The applications in computational fracture mechanics are detailed with numerical examples. A unified mesh generation procedure based on quadtree/octree algorithm is described. It also presents examples of fully automatic stress analysis of geometric models in NURBS, STL and digital images. Written in lucid and easy to understand language by the co-inventor of the scaled boundary element method Provides MATLAB as an integral part of the book with the code cross-referenced in the text and the use of the code illustrated by examples Presents new developments in the scaled boundary finite element method with illustrative examples so that readers can appreciate the significant features and potentials of this novel method—especially in emerging technologies such as 3D printing, virtual reality, and digital image-based analysis The Scaled Boundary Finite Element Method: Introduction to Theory and Implementation is an ideal book for researchers, software developers, numerical analysts, and postgraduate students in many fields of engineering and science.
Book Synopsis Acoustic Waves in Periodic Structures, Metamaterials, and Porous Media by : Noé Jiménez
Download or read book Acoustic Waves in Periodic Structures, Metamaterials, and Porous Media written by Noé Jiménez and published by Springer Nature. This book was released on 2021-11-03 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers a comprehensive and up-to-date treatment of practical applications of metamaterials, structured media, and conventional porous materials. With increasing levels of urbanization, a growing demand for motorized transport, and inefficient urban planning, environmental noise exposure is rapidly becoming a pressing societal and health concern. Phononic and sonic crystals, acoustic metamaterials, and metasurfaces can revolutionize noise and vibration control and, in many cases, replace traditional porous materials for these applications. In this collection of contributed chapters, a group of international researchers reviews the essentials of acoustic wave propagation in metamaterials and porous absorbers with viscothermal losses, as well as the most recent advances in the design of acoustic metamaterial absorbers. The book features a detailed theoretical introduction describing commonly used modelling techniques such as plane wave expansion, multiple scattering theory, and the transfer matrix method. The following chapters give a detailed consideration of acoustic wave propagation in viscothermal fluids and porous media, and the extension of this theory to non-local models for fluid saturated metamaterials, along with a description of the relevant numerical methods. Finally, the book reviews a range of practical industrial applications, making it especially attractive as a white book targeted at the building, automotive, and aeronautic industries.
Book Synopsis Reciprocity in Elastodynamics by : J. D. Achenbach
Download or read book Reciprocity in Elastodynamics written by J. D. Achenbach and published by Cambridge University Press. This book was released on 2003 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Important monograph by international authority who presents new methods/applications of a classical technique in elasticity.
Book Synopsis Phononic Crystals by : Abdelkrim Khelif
Download or read book Phononic Crystals written by Abdelkrim Khelif and published by Springer. This book was released on 2015-07-28 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth analysis as well as an overview of phononic crystals. This book discusses numerous techniques for the analysis of phononic crystals and covers, among other material, sonic and ultrasonic structures, hypersonic planar structures and their characterization, and novel applications of phononic crystals. This is an ideal book for those working with micro and nanotechnology, MEMS (microelectromechanical systems), and acoustic devices. This book also: Presents an introduction to the fundamentals and properties of phononic crystals Covers simulation techniques for the analysis of phononic crystals Discusses sonic and ultrasonic, hypersonic and planar, and three-dimensional phononic crystal structures Illustrates how phononic crystal structures are being deployed in communication systems and sensing systems
Download or read book Phononics written by Leonard Dobrzyński and published by Elsevier. This book was released on 2017-09-14 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phononics: Interface Transmission Tutorial Book Series provides an investigation of modern systems that includes a discrete matrix description. Classical continuous systems relying on the use of differential equations are recalled, showing that they generally have a specific limit on their corresponding modern matrix formulation. A detailed description of the mathematical languages that enables readers to find the composite system linear transmission properties is provided in the appendix. The physical model is described with exacting detail, and the bibliography is built to cite—in chronological order—all the scientists that have contributed over many years. Each volume is written with the aim of providing an up-to-date and concise summary of the present knowledge of interface transmission science, thus fostering the exchange of ideas among scientists interested in different aspects of interface transmission. The book serves as an introduction to advanced graduate students, researchers, and scientists with little study on the subject, and is also useful to help keep specialists informed on general progress in the field. Offers a unique approach on phononics from the interfacial transmission point-of-view Teaches the modern physics of interface transmission, in particular, phononics through composite systems Authored and edited by world-leading experts on interface transmission
Book Synopsis Phononic Crystals by : Vincent Laude
Download or read book Phononic Crystals written by Vincent Laude and published by Walter de Gruyter GmbH & Co KG. This book was released on 2015-09-14 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phononic crystals are artificial periodic structures that can alter efficiently the flow of sound, acoustic waves, or elastic waves. They were introduced about twenty years ago and have gained increasing interest since then, both because of their amazing physical properties and because of their potential applications. The topic of phononic crystals stands as the cross-road of physics (condensed matter physics, wave propagation in inhomogeneous and periodic media) and engineering (acoustics, ultrasonics, mechanical engineering, electrical engineering). Phononic crystals cover a wide range of scales, from meter-size periodic structures for sound in air to nanometer-size structures for information processing or thermal phonon control in integrated circuits. Phononic crystals have a definite relation with the topic of photonic crystals in optics. The marriage of phononic and photonic crystals also provides a promising structural basis for enhanced sound and light interaction. As the topic is getting popular, it is nowadays presented and discussed at various international conferences. After the first ten years during which the topic has remained mainly theoretical with a few proof-of-concept demonstrations in the literature, the evolution has been towards applications, instrumentation, and novel designs. The physical explanations for various effects are now well understood and efficient numerical methods and analysis tools have been developed. The book contains a comprehensive set of finite element model (FEM) scripts for solving basic phononic crystal problems. The scripts are short, easy to read, and efficient, allowing the reader to generate for him(her)self band structures for 2D and 3D phononic crystals, to compute Bloch waves, waveguide and cavity modes, and more.
Book Synopsis Acoustic Metamaterials by : Richard V. Craster
Download or read book Acoustic Metamaterials written by Richard V. Craster and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the book: This book is the first comprehensive review on acoustic metamaterials; novel materials which can manipulate sound waves in surprising ways, which include collimation, focusing, cloaking, sonic screening and extraordinary transmission. It covers both experimental and theoretical aspects of acoustic and elastic waves propagating in structured composites, with a focus on effective properties associated with negative refraction, lensing and cloaking. Most related books in the field address electromagnetic metamaterials and focus on numerical methods, and little (or no) experimental section. Each chapter will be authored by an acknowledged expert, amongst the topics covered will be experimental results on non-destructive imaging, cloaking by surface water waves, flexural waves in thin plates. Applications in medical ultrasound imaging and modeling of metamaterials will be emphasized too. The book can serve as a reference for researchers who wish to build a solid foundation of wave propagation in this class of novel materials.
Book Synopsis Acoustic Metamaterials and Phononic Crystals by : Pierre A. Deymier
Download or read book Acoustic Metamaterials and Phononic Crystals written by Pierre A. Deymier and published by Springer Science & Business Media. This book was released on 2013-01-13 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book presents all aspects of acoustic metamaterials and phononic crystals. The emphasis is on acoustic wave propagation phenomena at interfaces such as refraction, especially unusual refractive properties and negative refraction. A thorough discussion of the mechanisms leading to such refractive phenomena includes local resonances in metamaterials and scattering in phononic crystals.
Book Synopsis Mechanics of Microsystems by : Alberto Corigliano
Download or read book Mechanics of Microsystems written by Alberto Corigliano and published by John Wiley & Sons. This book was released on 2018-04-02 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Microsystems Alberto Corigliano, Raffaele Ardito, Claudia Comi, Attilio Frangi, Aldo Ghisi and Stefano Mariani, Politecnico di Milano, Italy A mechanical approach to microsystems, covering fundamental concepts including MEMS design, modelling and reliability Mechanics of Microsystems takes a mechanical approach to microsystems and covers fundamental concepts including MEMS design, modelling and reliability. The book examines the mechanical behaviour of microsystems from a ‘design for reliability’ point of view and includes examples of applications in industry. Mechanics of Microsystems is divided into two main parts. The first part recalls basic knowledge related to the microsystems behaviour and offers an overview on microsystems and fundamental design and modelling tools from a mechanical point of view, together with many practical examples of real microsystems. The second part covers the mechanical characterization of materials at the micro-scale and considers the most important reliability issues (fracture, fatigue, stiction, damping phenomena, etc) which are fundamental to fabricate a real working device. Key features: Provides an overview of MEMS, with special focus on mechanical-based Microsystems and reliability issues. Includes examples of applications in industry. Accompanied by a website hosting supplementary material. The book provides essential reading for researchers and practitioners working with MEMS, as well as graduate students in mechanical, materials and electrical engineering.
Author :Srinivasan Gopalakrishnan Publisher :Springer Science & Business Media ISBN 13 :0857292846 Total Pages :506 pages Book Rating :4.8/5 (572 download)
Book Synopsis Computational Techniques for Structural Health Monitoring by : Srinivasan Gopalakrishnan
Download or read book Computational Techniques for Structural Health Monitoring written by Srinivasan Gopalakrishnan and published by Springer Science & Business Media. This book was released on 2011-08-01 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased level of activity on structural health monitoring (SHM) in various universities and research labs has resulted in the development of new methodologies for both identifying the existing damage in structures and predicting the onset of damage that may occur during service. Designers often have to consult a variety of textbooks, journal papers and reports, because many of these methodologies require advanced knowledge of mechanics, dynamics, wave propagation, and material science. Computational Techniques for Structural Health Monitoring gives a one-volume, in-depth introduction to the different computational methodologies available for rapid detection of flaws in structures. Techniques, algorithms and results are presented in a way that allows their direct application. A number of case studies are included to highlight further the practical aspects of the selected topics. Computational Techniques for Structural Health Monitoring also provides the reader with numerical simulation tools that are essential to the development of novel algorithms for the interpretation of experimental measurements, and for the identification of damage and its characterization. Upon reading Computational Techniques for Structural Health Monitoring, graduate students will be able to begin research-level work in the area of structural health monitoring. The level of detail in the description of formulation and implementation also allows engineers to apply the concepts directly in their research.
Book Synopsis Emerging Technologies in Non-Destructive Testing VI by : Danny Van Hemelrijck
Download or read book Emerging Technologies in Non-Destructive Testing VI written by Danny Van Hemelrijck and published by CRC Press. This book was released on 2015-11-24 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Destructive Testing (NDT) is of worldwide significance, and is strongly related to the detection of damage in engineering structures (buildings, bridges, aircrafts, ships, pressure vessels, etc.) using non-invasive techniques (ultrasound, X-rays, Radar, neutrons, thermography, vibrations, acoustic emission, etc.). Emerging Technologies in Non-D
Book Synopsis Cavity Optomechanics by : Markus Aspelmeyer
Download or read book Cavity Optomechanics written by Markus Aspelmeyer and published by Springer. This book was released on 2014-07-05 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last few years cavity-optomechanics has emerged as a new field of research. This highly interdisciplinary field studies the interaction between micro and nano mechanical systems and light. Possible applications range from novel high-bandwidth mechanical sensing devices through the generation of squeezed optical or mechanical states to even tests of quantum theory itself. This is one of the first books in this relatively young field. It is aimed at scientists, engineers and students who want to obtain a concise introduction to the state of the art in the field of cavity optomechanics. It is valuable to researchers in nano science, quantum optics, quantum information, gravitational wave detection and other cutting edge fields. Possible applications include biological sensing, frequency comb applications, silicon photonics etc. The technical content will be accessible to those who have familiarity with basic undergraduate physics.
Book Synopsis Quantum Theory of the Solid State by : Lev Kantorovich
Download or read book Quantum Theory of the Solid State written by Lev Kantorovich and published by Springer Science & Business Media. This book was released on 2004-05-31 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Quantum Physics of the Solid State: an Introduction" Draft foreword: 26/09/03 If only this book had been available when I was starting out in science! It would have saved me countless hours of struggle in trying to apply the general ideas of the standard solid-state text-books to solve real problems. The fact is that most of the texts stop at the point where the real difficulties begin. The great merit of this book is that it describes in an honest and detailed way what one really has to do in order to understand the multifarious properties of solids in terms of the fundamental physical theory of quantum mechanics. University students of the physical sciences are taught about the fundamental the ories, and know that quantum mechanics, together with relativity, is our basis for understanding the physical world. But the practical difficulties of using quantum mechanics to do anything useful are usually not very well explained. The truth is that the application of quantum theory to achieve our present detailed understand ing of solids has required the development of a large array of mathematical tech niques. This is closely analogous to the challenge faced long ago by theoretical astronomers in trying to apply Newton's equations of motion to the heavens -they too had to develop a battery of theoretical and computational techniques to do cal culations that could be compared with observation.
Book Synopsis Piezoelectric MEMS Resonators by : Harmeet Bhugra
Download or read book Piezoelectric MEMS Resonators written by Harmeet Bhugra and published by Springer. This book was released on 2017-01-09 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces piezoelectric microelectromechanical (pMEMS) resonators to a broad audience by reviewing design techniques including use of finite element modeling, testing and qualification of resonators, and fabrication and large scale manufacturing techniques to help inspire future research and entrepreneurial activities in pMEMS. The authors discuss the most exciting developments in the area of materials and devices for the making of piezoelectric MEMS resonators, and offer direct examples of the technical challenges that need to be overcome in order to commercialize these types of devices. Some of the topics covered include: Widely-used piezoelectric materials, as well as materials in which there is emerging interest Principle of operation and design approaches for the making of flexural, contour-mode, thickness-mode, and shear-mode piezoelectric resonators, and examples of practical implementation of these devices Large scale manufacturing approaches, with a focus on the practical aspects associated with testing and qualification Examples of commercialization paths for piezoelectric MEMS resonators in the timing and the filter markets ...and more! The authors present industry and academic perspectives, making this book ideal for engineers, graduate students, and researchers.
Book Synopsis Mathematical Theory of Optics by : Rudolf Karl Luneburg
Download or read book Mathematical Theory of Optics written by Rudolf Karl Luneburg and published by Univ of California Press. This book was released on 1966 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
