Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Design And Fabrication Of A Stirling Thermal Vacuum Test
Download Design And Fabrication Of A Stirling Thermal Vacuum Test full books in PDF, epub, and Kindle. Read online Design And Fabrication Of A Stirling Thermal Vacuum Test ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Author :National Aeronautics and Space Administration (NASA) Publisher :Createspace Independent Publishing Platform ISBN 13 :9781721679522 Total Pages :28 pages Book Rating :4.6/5 (795 download)
Book Synopsis Design and Fabrication of a Stirling Thermal Vacuum Test by : National Aeronautics and Space Administration (NASA)
Download or read book Design and Fabrication of a Stirling Thermal Vacuum Test written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-21 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Stirling Radioisotope Generator (SRG110) is being developed for potential use on future NASA space science missions. The development effort is being conducted by Lockheed Martin under contract to the Department of Energy (DOE). The Stirling Technology Company supplies the free-piston Stirling power convertors, and NASA Glenn Research Center (GRC) provides support to the effort in a range of technologies. This generator features higher efficiency and specific power compared to the currently used alternatives. One potential application for the generator would entail significant cruise time in the vacuum of deep space. A test has been conceived at GRC to demonstrate functionality of the Stirling convertors in a thermal vacuum environment. The test article resembles the configuration of the SRG, however the requirement for low mass was not considered. This test will demonstrate the operation of the Stirling convertors in the thermal vacuum environment, simulating deep space, over an extended period of operation. The analysis, design, and fabrication of the test article will be described in this paper. Oriti, Salvatore M. and Schreiber, Jeffrey G. Glenn Research Center NASA/TM-2004-213372, AIAA Paper 2004-5561, E?14841
Book Synopsis The design and fabrication of a high temperature vacuum workstation for SLS research by : Nathan Elliott Moore
Download or read book The design and fabrication of a high temperature vacuum workstation for SLS research written by Nathan Elliott Moore and published by . This book was released on 1996 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author :National Aeronautics and Space Administration (NASA) Publisher :Createspace Independent Publishing Platform ISBN 13 :9781723470790 Total Pages :156 pages Book Rating :4.4/5 (77 download)
Book Synopsis Ultralight Fabric Reflux Tube (Ufrt) Thermal/Vacuum Test by : National Aeronautics and Space Administration (NASA)
Download or read book Ultralight Fabric Reflux Tube (Ufrt) Thermal/Vacuum Test written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-23 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spacecraft thermal control systems are essential to provide the necessary environment for the crew and equipment to function adequately on space missions. The Ultralight Fabric Reflux Tube (UFRT) was developed by Pacific Northwest Laboratory (PNL) as a lightweight radiator concept to be used on planetary-type missions (e.g., Moon, Mars). The UFRT consists of a thin-walled tube (acting as the fluid boundary), overwrapped with a low-mass ceramic fabric (acting as the primary pressure boundary). The tubes are placed in an array in the vertical position with the evaporators at the lower end. Heat is added to the evaporators, which vaporizes the working fluid. The vapor travels to the condenser end above and cools as heat is radiated to the environment. The fluid condensed on the tube wall is then returned to the evaporator by gravity. The primary objectives for the fiscal year 1994 program included the design and fabrication of prototype UFRTs and thermal/vacuum chamber testing of these test articles. Six UFRTS, with improved titanium liners, were successfully manufactured and provided to the Johnson Space Center in July 1994. Five were tested in a thermal/vacuum chamber in September 1994. Data obtained to characterize the performance of the UFRTs under simulated lunar conditions demonstrated the design concept successfully. In addition, a trade study showed that an optimized/improved UFRT could achieve as much as a 25% mass savings in the heat rejection subsystem of future planetary-type thermal control systems. Hurlbert, K. M. and Ewert, M. K. and Graf, J. P. and Keller, J. R. and Pauley, K. A. and Guenther, R. J. and Antoniak, Z. I. Johnson Space Center TEMPERATURE CONTROL; SPACECRAFT ENVIRONMENTS; THERMAL VACUUM TESTS; HEAT RADIATORS; HEAT PIPES; SPACECRAFT TEMPERATURE; VENTILATION; CERAMICS; VACUUM CHAMBERS; THERMAL PROTECTION; LUNAR BASES; FABRICS; THIN WALLS; SPACE MISSIONS; VENTS...
Book Synopsis Advanced Stirling Convertor Testing at NASA Glenn Research Center by : National Aeronaut Administration (Nasa)
Download or read book Advanced Stirling Convertor Testing at NASA Glenn Research Center written by National Aeronaut Administration (Nasa) and published by . This book was released on 2020-07-28 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: The U.S. Department of Energy (DOE), Lockheed Martin Space Systems (LMSS), Sunpower Inc., and NASA Glenn Research Center (GRC) have been developing an Advanced Stirling Radioisotope Generator (ASRG) for use as a power system on space science and exploration missions. This generator will make use of the free-piston Stirling convertors to achieve higher conversion efficiency than currently available alternatives. The ASRG will utilize two Advanced Stirling Convertors (ASC) to convert thermal energy from a radioisotope heat source to electricity. NASA GRC has initiated several experiments to demonstrate the functionality of the ASC, including: in-air extended operation, thermal vacuum extended operation, and ASRG simulation for mobile applications. The in-air and thermal vacuum test articles are intended to provide convertor performance data over an extended operating time. These test articles mimic some features of the ASRG without the requirement of low system mass. Operation in thermal vacuum adds the element of simulating deep space. This test article is being used to gather convertor performance and thermal data in a relevant environment. The ASRG simulator was designed to incorporate a minimum amount of support equipment, allowing integration onto devices powered directly by the convertors, such as a rover. This paper discusses the design, fabrication, and implementation of these experiments. Oriti, Salvatore M. and Blaze, Gina M. Glenn Research Center NASA/TM-2007-215010, AIAA Paper-2007-4840, E-16190 STIRLING CYCLE; RADIOISOTOPE HEAT SOURCES; THERMOELECTRIC POWER GENERATION; ENERGY CONVERSION EFFICIENCY; ALTERNATING CURRENT; THERMAL VACUUM TESTS; SIMULATION; AEROSPACE SYSTEMS; PROPULSION SYSTEM PERFORMANCE
Book Synopsis Stirling Engine Design Manual by : William Martini
Download or read book Stirling Engine Design Manual written by William Martini and published by CreateSpace. This book was released on 2013-01-25 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: For Stirling engines to enjoy widespread application and acceptance, not only must the fundamental operation of such engines be widely understood, but the requisite analytic tools for the stimulation, design, evaluation and optimization of Stirling engine hardware must be readily available. The purpose of this design manual is to provide an introduction to Stirling cycle heat engines, to organize and identify the available Stirling engine literature, and to identify, organize, evaluate and, in so far as possible, compare non-proprietary Stirling engine design methodologies. This report was originally prepared for the National Aeronautics and Space Administration and the U. S. Department of Energy.
Download or read book Research & Technology 2000 written by and published by DIANE Publishing. This book was released on with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Author :European Space Research and Technology Centre. Product Assurance and Safety Department Publisher : ISBN 13 : Total Pages :27 pages Book Rating :4.:/5 (69 download)
Book Synopsis A Thermal Vacuum Test for the Screening of Space Materials by : European Space Research and Technology Centre. Product Assurance and Safety Department
Download or read book A Thermal Vacuum Test for the Screening of Space Materials written by European Space Research and Technology Centre. Product Assurance and Safety Department and published by . This book was released on 1994 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification describes a thermal vacuum test to determine the outgassing properties of materials proposed for use in the fabrication of ESA spacecraft and associated equipment and for vacuum facilities used for flight hardware tests and for certain launcher hardware.
Book Synopsis Large Space Structures & Systems in the Space Station Era by :
Download or read book Large Space Structures & Systems in the Space Station Era written by and published by . This book was released on 1993 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1987 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Scientific and Technical Aerospace Reports by :
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy written by and published by . This book was released on 1983 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Energy: a Continuing Bibliography with Indexes by :
Download or read book Energy: a Continuing Bibliography with Indexes written by and published by . This book was released on 1980 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Large Space Structures and Systems in the Space Station Era: A Bibliography with Indexes (supplement 05) by :
Download or read book Large Space Structures and Systems in the Space Station Era: A Bibliography with Indexes (supplement 05) written by and published by . This book was released on 1993 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 1396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Large Space Structures & Systems in the Space Station Era by :
Download or read book Large Space Structures & Systems in the Space Station Era written by and published by . This book was released on 1993 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Tech Briefs written by and published by . This book was released on 1990 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Cold-wall Thermal-vacuum, Thermal Design Check for Fully Insulated Experiment Packages by : Charles Dan
Download or read book Cold-wall Thermal-vacuum, Thermal Design Check for Fully Insulated Experiment Packages written by Charles Dan and published by . This book was released on 1968 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
