Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Corrugated Plastic Ducts For Internal Bonded Post Tensioning
Download Corrugated Plastic Ducts For Internal Bonded Post Tensioning full books in PDF, epub, and Kindle. Read online Corrugated Plastic Ducts For Internal Bonded Post Tensioning ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :9782883940475 Total Pages :56 pages Book Rating :4.9/5 (44 download)
Book Synopsis Corrugated Plastic Ducts for Internal Bonded Post-tensioning by : fib Fédération internationale du béton
Download or read book Corrugated Plastic Ducts for Internal Bonded Post-tensioning written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2000-01-01 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimum corrosion protection of post-tensioning tendons has been a priority since the beginning of this technology. The temporary ban of grouted post-tensioning tendons in the United Kingdom, from 1992-1996, has initiated a review of all aspects related to durability of post-tensioning tendons. One of the UK conclusions of this review was to require encapsulation of the post-tensioning tendons into wear-resistant and leak-tight plastic ducts to serve as an additional corrosion protection barrier. Since that time, other countries have at least partially adopted similar approaches. Designs of these plastic ducts may vary significantly between different suppliers. In addition, experience with these systems is still relatively limited. Hence, these plastic ducts cannot be standardised at this time. Therefore, the former FIP Commission 2, and now fib Commission 9 Reinforcing and Prestressing Materials and Systems, has set-up a task group to prepare a fib report on corrugated plastic ducts for internal, bonded post-tensioning. This report is written as a guide for an approval process for such plastic ducts. It shall serve readers such as authorities, and engineers as a guide on how to set-up a formal state approval process for these ducts, or at least allow them to properly assess systems offered for a specific project.
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :2883941157 Total Pages :183 pages Book Rating :4.8/5 (839 download)
Book Synopsis Polymer-duct systems for internal bonded post-tensioning by : fib Fédération internationale du béton
Download or read book Polymer-duct systems for internal bonded post-tensioning written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2014-12-01 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this recommendation - fib Bulletin 75: Polymer-duct systems for internal bonded post-tensioning - is to update and amend fib Bulletin 7:Corrugated plastic ducts for internal bonded post-tensioning, a technical report published in 2000. fib Bulletin 75 is meant as a cornerstone for the technical approval of polymer (plastic) ducts for internal bonded post-tensioning and possibly for the test procedures of a future testing standard. The updated bulletin includes new information on the design and detailing of concrete structures containing tendons with polymer ducts. The recommendation provides detailed test specifications for polymer materials, duct components and duct systems. In addition, the report contains recommendations for approval testing and attestations of conformity for polymer-duct systems. Although the new generation of corrugated polymer ducts for bonded post-tensioning have now been around for approximately twenty years, products still differ in material properties, geometrical detail, installation procedures and on-site use. Unlike corrugated steel ducts or smooth polyethylene (PE) pipes, they have not yet become standardized. It is the opinion of fib Task Group 9.16 and Commission 9 that these plastic ducts should, therefore, still be subjected to a systems approval process. This recommendation offers information acquired from twenty years of experience as well as new specifications that will, hopefully, lead to the standardization of polymer-duct systems.
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :9782883940734 Total Pages :84 pages Book Rating :4.9/5 (47 download)
Book Synopsis Durability of Post-tensioning Tendons by : fib Fédération internationale du béton
Download or read book Durability of Post-tensioning Tendons written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The durability of post-tensioning tendons depends undoubtedly on the durability of the materials used, but there are design concept specifics which are also of major importance: the post-tensioning layout and layers of protection such as concrete cover and selected materials in view of the aggressivity of the environment for instance. It is well known that sustainability principles guide the Engineer from the very beginning, at the project conception, during construction and the service life of a structure. Decisions made during conceptual and design stage have the largest influence on the durability and sustainability of post-tensioning tendons. fibBulletin 33 addresses the specifics for prestressed concrete structures: the durability of post-tensioning tendons. It should be noted that it does not repeat topics that have been addressed in other fib bulletins and which is common for both reinforced concrete and prestressed concrete structures. Pre-tensioning, which is used extensively in the precast industry, is not considered here, although conclusions and recommendations herein may, in many cases, also be applicable. This recommendation was prepared by Working Party 5.4.2, Durability specifics for prestressed concrete structures, in cooperation with fib Commission 9,Reinforcing and prestressing materials and systems. A preliminary version of this recommendation served as the basic document for the second workshop on "Durability of post-tensioning tendons", held on 11-12 October 2004 in Zurich. This workshop was a follow-up to the first workshop held in Ghent in 2001. Bulletin 33 includes revisions corresponding to the agreed results of the Zurich workshop.
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :9782883940710 Total Pages :130 pages Book Rating :4.9/5 (47 download)
Book Synopsis Post-tensioning in Buildings by : fib Fédération internationale du béton
Download or read book Post-tensioning in Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2005-01-01 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of prestressing technology has constituted one of the more important improvements in the fields of structural engineering and construction. Referring particularly to post-tensioning applications, it is generally recognized how it opens the possibility to improve economy, structural behaviour and aesthetic aspects in concrete solutions. In spite of the simplicity of its basic concepts and well-known advantages, the application extent of post-tensioning solutions cannot be considered harmonized in the different areas and structural applications. In fact, for various reasons, it appears that the potential offered by prestressing is far from being fully exploited, especially in building structures field. In many cases where post-tensioning would provide a visibly superior solution, it happens after all that a more conventional non-prestressed solution is often selected. The main objective of this fib Technical Report is therefore to show the benefits of using post-tensioning for the more common practical applications in concrete buildings. The document is mainly addressed to architects, contractors and owners. It is also drafted with the goal of motivating building designers to use post-tensioning: basic design aspects related to prestressing effects and design criteria are summarized and conceptual design aspects are emphasized. A set of practical examples is presented, showing the adopted solutions and their advantages when meeting the requirements of specific problems. The selected examples were precisely not chosen because they are outstanding structures. As a matter of fact, post-tensioning principles and technology can be used in any structure, independently of its importance, covering a wide range of building structural applications, improving the structure quality and promoting concrete as a structural material. The advantages of using post-tensioning, concerning structural behaviour, economy, detailing and constructive aspects, are illustrated by the presentation of several existing structures, most of them designed by Working Party members. General design calculations are not presented, but design results showing the improvement in structural behaviour are illustrated.
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :288394055X Total Pages :279 pages Book Rating :4.8/5 (839 download)
Book Synopsis Durability of Post-tensioning Tendons by : fib Fédération internationale du béton
Download or read book Durability of Post-tensioning Tendons written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2001-01-01 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: In some countries durability problems with post-tensioning tendons have in the past led to fairly restrictive regulations. Improvements to execution procedures have been developed since, and new or improved prestressing systems have been proposed, too. This development was, of course, subject of discussions in fib Commission 9 Reinforcing and Prestressing Materials and Sytems and in IABSE Working Commission 3 Concrete Structures. It was decided to organise a workshop with the aim to review the different aspects of the problems encountered and to discuss solutions available today. Keynote speakers from various countries were invited to contribute. Their papers are published in this bulletin, grouped together under the following themes: Inventory and condition (6 papers) Investigation and repair (5 papers) Technical progress (4 papers) Strategies for improvement (6 papers) Supported by the international federation for structural concrete fib, and the international association for bridge and structural engineering IABSE, the workshop took place on 15-16 November 2001 at Ghent University, celebrating the 75th anniversary of the Magnel Laboratory for Concrete Research, whose director also chaired the Scientific Committee and edited the bulletin. It needs to be emphasised that in the bulletin invited experts present their individual views. Although not yet discussed in any of the association's working bodies, the highly topical contents of the bulletin is believed to be of general interest to fib's members and to document a starting point for future work in this field. Therefore, the Council of fib agreed to exceptionally publish these papers within fib's series of Bulletins.
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :9782883940758 Total Pages :234 pages Book Rating :4.9/5 (47 download)
Book Synopsis Retrofitting of Concrete Structures by Externally Bonded FRPs, With Emphasis on Seismic Applications by : fib Fédération internationale du béton
Download or read book Retrofitting of Concrete Structures by Externally Bonded FRPs, With Emphasis on Seismic Applications written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2006-01-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 35 is the first bulletin to publish documentation from an fib short course. These courses are held worldwide and cover advanced knowledge of structural concrete in general, or specific topics. They are organized by fib and given by internationally recognized experts in fib, often supplemented with local experts active in fib. They are based on the knowledge and expertise from fib's ten Commissions and nearly fifty Task Groups. fib Bulletin 35 presents the course materials developed for the short course "Retrofitting of Concrete Structures through Externally Bonded FRP, with emphasis on Seismic Applications", given in Ankara and Istanbul in June 2005. The course drew on expertise both from outside Turkey and from the large pool of local experts on this subject. In most countries of the world, the building stock is ageing and needs continuous maintenance or repair. Moreover, the majority of existing constructions are deficient in the light of current knowledge and design codes. The problem of structural deficiency of existing constructions is especially acute in seismic regions, as, even there, seismic design of structures is relatively recent. The direct and indirect costs of demolition and reconstruction of structurally deficient constructions are often prohibitive; furthermore they entail a substantial waste of natural resources and energy. Therefore, structural retrofitting is becoming increasingly widespread throughout the world. Externally bonded Fibre Reinforced Polymers (FRPs) are rapidly becoming the technique of choice for structural retrofitting. They are cleaner and easier to apply than conventional retrofitting techniques, reduce disruption to the occupancy and operation of the facility, do not generate debris or waste, and reduce health and accident hazards at the construction site as well as noise and air pollution in the surroundings. fib Bulletin 35 gives state-of-the-art coverage of retrofitting through FRPs and presents relevant provisions from three recent standardisation milestones: EN 1998-3:2005 "Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings", the 2005 Draft of the Turkish seismic design code, and the Italian regulatory document CNR-DT 200/04, "Instructions for Design, Execution and Control of Strengthening Interventions by Means of Fibre-Reinforced Composites" (2004).
Book Synopsis View Full-Size Image Corrugated-steel-web bridges by : FIB - Féd. Int. du Béton
Download or read book View Full-Size Image Corrugated-steel-web bridges written by FIB - Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2015 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: To date, very little has been published on the topic of corrugated-steel-web bridges. fib Bulletin 77 offers the global engineering community a first complete overview of this fascinating technology. The shear capacity of corrugated-steel web began to be studied in Japan in 1965 and resulted in the use of corrugated steel in steel-girder webs as a replacement for web stiffeners. After Japan laid the groundwork for the technology, France built the first composite bridge with corrugated-steel webs and upper and lower concrete slabs in the 1980s. Composite bridges had already been popular in France but engineers found that concrete slab creep meant that prestressing force spread into the steel plates, causing high losses. Corrugated-steel web, which reduces axial stiffness, was welcomed as a solution to this problem and several bridges were designed and built with this technology. Building on France’s composite technology, Japan began developing corrugated-web precast box-girder bridges in the 1990s and today has over 140 corrugated-web bridges, by far the largest number for any country in the world. Japanese engineers have come a long way in solving issues such as fatigue and ultimate load behaviour and have made good use of corrugated-steel web’s advantages for bridge building, which include reduced self weight (of approximately 15% compared with the weight of an ordinary concrete box-girder bridge), economy and improved construction processes. fib Bulletin 77: Corrugated-steel-web bridges covers numerous examples of bridges in Japan and France as well as an in-depth case study and analysis of a large corrugated-steel-web bridge in Germany. This publication offers designers, proprietors, contractors and architects alike relevant technical and theoretical information on construction processes along with ideas for future development.
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :9782883940604 Total Pages :56 pages Book Rating :4.9/5 (46 download)
Book Synopsis Grouting of Tendons in Prestressed Concrete by : fib Fédération internationale du béton
Download or read book Grouting of Tendons in Prestressed Concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2002-01-01 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prestressed Concrete is a very efficient form of construction; it takes advantage of the strength of concrete in compression. Developed mainly over the second part of the 20th century, it has proven to be reliable and durable. However, in the 1990's some cause for concern was discovered, first in the UK and followed by many other countries of the world. It appeared that the grout, an important means of protection of the steel against corrosion for internally ducted tendons, was in some cases inadequate. Major investigations followed including physical intrusive examination of ducts, mainly in bridges, and re-writing of procedures, processes and specifications, and in 1998 FIP launched a Task Group to review their advice note "Guidelines for Grouting" which had first been published in 1990. The merger of FIP and CEB in 1998 brought this under the auspices of fib. Structural deficiencies have only been found in a small number of bridges and in most of these cases the cause is clearly identifiable as either design detailing, workmanship or materials. In the UK, the Concrete Society report TR47 "Durable Post-tensioned Concrete Bridges" had been published in 1996, which was the culmination of four years of investigative research, and contained major new specifications and procedures aimed at improving the quality of grouting. In the USA, the Post Tensioning Institute published in 2001 their guide "Specification for Grouting of Post-Tensioned Structures", which also represented major steps forward in materials and testing requirements. The American Segmental Bridge Institute has set up a Committee to re-examine their guidelines, as have many other National Bodies worldwide. In Europe, France has issued a "Fascicule No. 65A" covering requirements for grouting and there are many developments in hand in other countries. Also in Europe, a European Technical Approval Guideline (ETAG) has been published for approval of post-tensioning systems which covers several aspects of grout and grouting. In November 2001 an international workshop was held in Ghent, Belgium on "Durability of Post-Tensioning Tendons" [see fib Bulletin 15] at which international experience was exchanged. The theme was clearly apparent; those bridge owners that have looked, have found some problems with a few of their post-tensioned bridges. In most cases steps are being taken to repair existing bridges, where considered necessary, and to improve future construction by reviewing national specifications. Emphasis is being put on a multi-layer protection strategy whereby protection against corrosion is provided by waterproofing, dense impermeable concrete, sealed ducts and good quality grout. Design detailing and rain water management are seen as important aspects. It was, therefore, timely for fib to publish state-of-the-art guidelines to assist in developing and improving the quality of a major line of defence against corrosion, the cement grout. This document represents a consensus view of current practitioners of what is a rapidly developing awareness of some of the shortcomings of previous practice and suggests improvements. This document is a major update of the previous FIP Guidelines and may be taken as a future basis for updating EN 445-447. New areas include understanding of the deleterious effects of an unstable grout, bleeding and how to avoid it, the importance of training and proper procedures, mix design and testing/trials and some new test procedures. It is now understood and generally accepted that the properties of common grout made from cement and water can be very variable and sometimes unpredictable and such grout is not recommended.
Author :fib - Fédération internationale du béton Publisher :fib - Fédération internationale du béton ISBN 13 :2883941122 Total Pages :177 pages Book Rating :4.8/5 (839 download)
Book Synopsis Bond and anchorage of embedded reinforcement: Background to the fib Model Code for Concrete Structures 2010 by : fib - Fédération internationale du béton
Download or read book Bond and anchorage of embedded reinforcement: Background to the fib Model Code for Concrete Structures 2010 written by fib - Fédération internationale du béton and published by fib - Fédération internationale du béton. This book was released on 2014-05-01 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the preparation for the fib Model Code for Concrete Structures 2010, task group 4.5 Bond Models undertook a major review of rules for bond and anchorage of reinforcement in the CEB-FIP Model Code 1990. This bulletin presents the outcome of that review, describes the rationale for the revisions and presents the evidence on which the revisions are based. The principle changes in MC2010 include raising the limit on concrete strength that may be used when determining bond resistance to 110MPa, introduction of a coefficient η4 to cater for different reinforcement Classes, and coverage of new construction materials including epoxy coated and headed bars. The format of design rules has been changed to permit more rational treatment of confinement from concrete cover and transverse reinforcement, the contribution of end hooks and bends for tension bars, and end bearing to compression laps. New guidance is provided covering a range of construction techniques and service environments and the influence of long term degradation. Analyses of various aspects of detailing on performance of laps and anchorages have resulted in discontinuation of the ‘proportion lapped’ factor α6, alterations to requirements of transverse reinforcement at laps, and have resolved inconsistencies in provisions for bundled bars between major national codes. Apparent inconsistencies in existing rules for lapped joints and anchorages and between the local bond/slip model and design rules are also resolved, thus allowing integration of application rules and modelling. Finally, the basis for an attempt to introduce simple detailing rules for laps and anchorages is described.
Book Synopsis Durability of Engineering Structures by : J Bijen
Download or read book Durability of Engineering Structures written by J Bijen and published by Elsevier. This book was released on 2003-08-31 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil engineering failures currently amount to 5 to 10 % of the total investment in new buildings and structures. These failures not only represent important cost considerations, they also have an environmental burden associated with them. Structures often deteriorate because not enough attention is given during the design stage and most standards for structural design do not cover design for service life. Designing for durability is often left to the structural designer or architect who may not have the necessary skills, and the result is all too often failure, incurring high maintenance and repair costs. Knowledge of the long-term behaviour of materials, building components and structures is the basis for avoiding these failures.Durability of engineering structures uses on the design of buildings for service life, effective maintenance and repair techniques in order to reduce the likelihood of failure. It describes the in situ performance of all the major man-made materials used in civil engineering construction - metals (steel and aluminium), concrete and wood. In addition some relatively new high-performance materials are discussed - high-performance concrete, high-performance steel and fibre-reinforced polymers (FRP). Deterioration mechanisms and the measures to counteract these, as well as subsequent maintenance and repair techniques are also considered and the latest standards on durability and repair are explained.Strategies for durability, maintenance and repair, including life cycle costing and environmental life cycle assessment methods are discussed. Finally practical case studies show how repairs can be made and the best ways of ensuring long term durability. This book is aimed at students in civil engineering, engineers, architects, contractors, plant managers, maintenance managers and inspection engineers. - Explains the reasons why structures often deteriorate before they should because of poor design - Shows how to design structures effectively for service life - Considers durability characteristics of standard and high performance construction materials
Author :FIB – International Federation for Structural Concrete Publisher :FIB - Féd. Int. du Béton ISBN 13 :2883941289 Total Pages :163 pages Book Rating :4.8/5 (839 download)
Book Synopsis Sustainability of precast structures by : FIB – International Federation for Structural Concrete
Download or read book Sustainability of precast structures written by FIB – International Federation for Structural Concrete and published by FIB - Féd. Int. du Béton. This book was released on 2018-12-01 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainability is a crucial concept. Sustainability was first introduced in the fib by creating a Special Activity Group under the convenorship of Prof Sakai. This group encouraged and helped all fib commissions to create their own groups dealing with sustainability. The fib Commission 6 “Prefabrication” took up this challenge and created a Task Group called “Sustainability of Structures with Precast Elements” in 2012. The group was created as a joint group with PCI (Precast Concrete Institute of USA), with the then-active fib Commission 3 “Environmental aspects of design and construction”, and the fib’s SAG8 on Sustainability. Therefore, this Bulletin 88 is a joint publication between PCI and fib. The aim of the work was to gather and study the most recent work that has been developed regarding sustainability – and more particularly Life Cycle Assessment - of structures in which precast elements are used. The final aim of the group would be to provide recommendations for the study and assessment of structures built with precast elements. It will cover all aspects of this kind of structure, from planning, design, execution, use, maintenance and remedial activities to deconstruction, reuse, demolition and recycling. The fib holds sustainability as a high priority, which triggered the creation of a new Commission 7 “Sustainability” during the 2015 fib commissions reorganisation. This commission has been chaired since then by Prof Hájek. Sustainability concepts were already introduced in the Model Code 2010 and are a key part in the elaboration of the Model Code 2020. Experts from many parts of the world contributed to this fib Bulletin 88 which gives the document a broad overview of sustainability sensibilities across different continents. Bulletin 88 starts with a description of the importance of environmental concepts and developments in the world today and the reason why sustainability is a crucial concept that will be even more important in the future. The document then focuses on the different advances of standards and regulations that have been developed or are in the process of being implemented. ISO, European regulations, North American regulations, Brazilian implementation in real precast companies and the developments of the fib Model Codes have been considered in this bulletin. After that, the bulletin examines life cycle aspects of precast structures, taking former fib bulletins as a basis. Then, it moves on to an in-depth study of specific sustainability aspects of precast structures. Then, the bulletin deals with the special methodologies and tools that are available around the world to handle sustainability in general and with precast structures in particular. A selection of tools is described in this chapter. The Task Group also developed proposals about how to deal with the sustainability of precast structures. Some of the proposals are described conceptually in the text. The final chapter compiles several case studies or examples of sustainability applications of precast structures. The examples differ and are grouped by category: buildings, infrastructure and special works.v The task group continues to work on developing other documents that will focus on the detailed practical application of some of the sustainability models described in this document.
Book Synopsis Partial factor methods for existing concrete structures by : FIB - Féd. Int. du Béton
Download or read book Partial factor methods for existing concrete structures written by FIB - Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2016 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a large part of the existing buildings and infrastructure the design life has been reached or will be reached in the near future. These structures might need to be reassessed in order to investigate whether the safety requirements are met. Current practice on the assessment of existing concrete structures however needs a thorough evaluation from a risk and reliability point of view, as they are mostly verified using simplified procedures based on the partial factor method commonly applied in design of new structures. Such assessments are often conservative and may lead to expensive upgrades. Although the last decades reliability-based assessment of existing concrete structures has gained wide attention in the research field, a consistent reliability-based assessment framework and a practically applicable codified approach which is compatible with the Eurocodes and accessible for common structural engineering problems in everyday practice is currently missing. Such an approach however allows for a more uniform, more objective and probably more widely applied assessment approach for existing concrete structures. Hence, in this bulletin two different partial factor formats are elaborated, i.e. the Design Value Method (DVM) and the Adjusted Partial Factor Method (APFM), enabling the incorporation of specific reliability related aspects for existing structures. The DVM proposes a fundamental basis for evaluating partial factors whereas the APFM provides adjustment factors to be applied on the partial factors for new structures in EN 1990. In this bulletin both methods are elaborated and evaluated and a basis is provided for decision making regarding the target safety level of existing structures.
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :2883941165 Total Pages :205 pages Book Rating :4.8/5 (839 download)
Book Synopsis Benchmarking of deemed-to-satisfy provisions in standards by : fib Fédération internationale du béton
Download or read book Benchmarking of deemed-to-satisfy provisions in standards written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2015-05-01 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standards for specifying and ensuring the durability of new concrete structures are commonly of the prescriptive kind. fib Bulletin 76: Benchmarking of deemed-to-satisfy provisions in standards - Durability of reinforced concrete structures exposed to chlorides presents the benchmarking of a number of rules for chloride-induced corrosion as given in national codes such as European, US and Australian standards. This new benchmark determines the reliability ranges in the chloride-induced depassivation of rebar if the deemed-to-satisfy rules of different countries are taken into consideration. It does not only involve (probabilistic) calculations using input mainly based on short-term and rapid laboratory-test data but also involves input based on an independent assessment of existing structures. The reliability analyses are carried out using the probabilistic design approach for chloride-induced corrosion presented in fib Bulletin 34: Model Code for Service Life Design (2006), fib Model Code for Concrete Structures 2010 and ISO 16204:2012. The work compares the calculated reliability ranges thus determined with the target reliabilities proposed by current specifications and, based on the comparison, offers a proposal for the improvement of deemed-to-satisfy rules and specifications. fib Bulletin 76 presents and discusses in detail the input data for the examined model parameters and offers an extensive annexe documenting the values of the individual parameters used in the analyses. It thus provides a reliable database for the performance-based probabilistic service-life design of concrete structures exposed to chlorides, be they in the form of salt fog, sea water or de-icing salts.
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :2883941106 Total Pages :202 pages Book Rating :4.8/5 (839 download)
Book Synopsis Code-type models for concrete behaviour by : fib Fédération internationale du béton
Download or read book Code-type models for concrete behaviour written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2013-11-01 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Model Code 2010 represents the state-of-the-art of code-type models for structural behaviour of concrete. It comprises constitutive relations and material models together with the most important explanatory notes. However the underlying normative work, i.e. the fundamental data as well as the considerations and discussions behind the formulas could not be given within the Model Code text. Based on various experiences gained after the publication of Model Code 1990 this lacking background information will lead in the following to numerous questions arising from Model Code users. Consequently the present bulletin claims to conquer this general weakness of codes in a way to guard against any future misunderstandings of the Model Code 2010 related to its chapter 5.1 (Concrete). It discusses the given formulas in connection with experimental data and the most important international literature. The constitutive relations or material models, being included in MC1990 and forming the basis and point of origin of the Task Group’s work, were critically evaluated, if necessary and possible adjusted, or replaced by completely new approaches. Major criteria have been the physical and thermodynamical soundness as well as practical considerations like simplicity and operationality. This state-of-the-art report is intended for practicizing engineers as well as for researchers and represents a comprehensible summary of the relevant knowledge available to the members of the fib Task Group 8.7 at the time of its drafting. Besides the fact that the bulletin is a background document for Chapter 5.1 of MC2010, it will provide an important foundation for the development of future generations of code-type models related to the characteristics and the behaviour of structural concrete. Further it will offer insights into the complexity of the normative work related to concrete modelling, leading to a better understanding and adequate appreciation of MC2010.
Author :fib Fédération internationale du béton Publisher :FIB - Féd. Int. du Béton ISBN 13 :2883941246 Total Pages :146 pages Book Rating :4.8/5 (839 download)
Book Synopsis Precast Insulated Sandwich Panels by : fib Fédération internationale du béton
Download or read book Precast Insulated Sandwich Panels written by fib Fédération internationale du béton and published by FIB - Féd. Int. du Béton. This book was released on 2017-12-01 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the mid-20th century, with the rise of industrial prefabrication, precast concrete sandwich panels started being used as cladding for buildings. Since then, society and construction industry have become increasingly aware of energy efficiency in all fields, including affordability and sustainability consciousness, while maintaining the buildings’ durability. As such, buildings have been subject to increasingly stringent requirements which has kept the technology of sandwich panels continually at the forefront of building envelope evolution. Nowadays, sandwich panels have reached the highest standards of functional performance and aesthetic appeal. In building construction, these sandwich panel attributes combine with the well-known advantages of prefabrication including structural efficiency, flexibility in use, speed of construction, quality consciousness, durability, and sustainability. Sandwich panels have gained more exposure, thus representing quite a significant application within the prefabrication industry and a vital component of the precast market. The fib Commission “Prefabrication” is eager to promote the development of all precast structural concrete products and to share the knowledge and experience gained, to aid with practical design and construction. By issuing this comprehensive overview, “Guide to Good Practice”, a better understanding of design considerations, structural analysis, building physics, use of materials, manufacturing methods, equipment usage and field performance will be provided. This document contains the latest information currently available worldwide. The Commission is particularly proud that this document is a result of close cooperation with PCI and that it is published by both the fib and PCI. This cooperation started six years ago, first with comparing the different approaches to several issues, then progressively integrating and producing common documents, like this one, that hasn’t yet been treated in a specific Guide by either body. This Guide is intended to be the reference document to all who are interested in utilising the advantages of Precast Sandwich wall panels. In conjunction with the previously published Planning and Design Handbook on Precast Building Structures, the designer will have significant resources to integrate sandwich wall panels into any applicable structure.
Author :fib Fédération internationale du béton Publisher :fib Fédération internationale du béton ISBN 13 :2883940827 Total Pages :134 pages Book Rating :4.8/5 (839 download)
Book Synopsis Constitutive Modelling of High Strength/high Performance Concrete by : fib Fédération internationale du béton
Download or read book Constitutive Modelling of High Strength/high Performance Concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2008-01-01 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Strength/High Performance Concrete (HSC/HPC) continues to be the object of particular interest and extensive research, and its use in construction is increasing continuously. fib Bulletin 42 summarises the available information on the material behaviour of HSC/HPC, and develops a set of code-type constitutive relations as an extension of CEB-FIP Model Code 1990. Literature on experimental data and international guidelines, standards and recommendations were reviewed, and already-existing constitutive relations and models were evaluated. In addition to a number of material laws chosen and adjusted for this report, some new constitutive relations were developed based on the collected data. The criteria for the choice of the existing relations as well as the development of the new constitutive relations involved their simplicity and operationality (code-type mathematical formulations). Furthermore, they had to be physically sound and if possible describe the behaviour of both high-performance and normal strength concretes by a unique relation. Finally, compliance with the specifications given in the CEB-FIP Model Code 1990 was examined. This State-of-art report is intended for engineers and represents a summary of the relevant knowledge available to and possessed by the members of the Task Group at the time of its drafting.
Author :FIB – International Federation for Structural Concrete Publisher :FIB - International Federation for Structural Concrete ISBN 13 :2883941327 Total Pages :242 pages Book Rating :4.8/5 (839 download)
Book Synopsis Externally applied FRP reinforcement for concrete structures by : FIB – International Federation for Structural Concrete
Download or read book Externally applied FRP reinforcement for concrete structures written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 2019-05-01 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: In December 1996, CEB established a Task Group with the main objective to elaborate design guidelines for the use of FRP reinforcement in accordance with the design format of the CEB-FIP Model Code and Eurocode2. With the merger of CEB and FIP into fib in June 1998, this Task Group became fib TG 9.3 FRP Reinforcement for concrete structures in Commission 9 Reinforcing and Prestressing Materials and Systems. Finally, as a result of the restructuring of fib’s Commissions and Task Groups at the end of 2014, the Task Group became fib T5.1 FRP Reinforcement for concrete structures, chaired by Stijn Matthys at Ghent University, in Commission 5 Reinforcements. The work of former TG 9.3 and current T5.1 was performed by two working parties (WP), one of which is “Externally Applied Reinforcement” (EAR), which produced fib bulletin 14 “Externally bonded FRP reinforcement for RC structures” in July 2001. Following a number of years of relatively slow activity, the WP on externally applied reinforcement was reactivated and started working on an update of bulletin 14. The result of this work is summarised in the present technical report, which aims to give design guidelines on the use of externally applied FRP reinforcement (both externally bonded and near-surface mounted) for concrete structures. An attempt has been made to present some of the topics in a Eurocode-compatible format, so that the material covered may form the basis for the introduction of composites in the next version of Eurocode 2 and for the updating of the text on seismic retrofitting with composites in the next version of Eurocode 8. All persons who participated in the preparation of this Bulletin are mentioned in the copyright page. Further acknowledgements are due to Josée Bastien (Canada), Hans Rudolf Ganz (Switzerland) and Luc Taerwe (Belgium) for revision of the document. To all members of the working party on externally applied reinforcement our sincere thanks are expressed for the high quality and extensive work brought in on a voluntary basis.
