Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Concerning The Catalytic Activity Of Metallic Oxides And Salts In Vapor Phase Oxidation
Download Concerning The Catalytic Activity Of Metallic Oxides And Salts In Vapor Phase Oxidation full books in PDF, epub, and Kindle. Read online Concerning The Catalytic Activity Of Metallic Oxides And Salts In Vapor Phase Oxidation ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Concerning the Catalytic Activity of Metallic Oxides and Salts in Vapor Phase Oxidation by : Ralph Anderson Davis
Download or read book Concerning the Catalytic Activity of Metallic Oxides and Salts in Vapor Phase Oxidation written by Ralph Anderson Davis and published by . This book was released on 1942 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Transition Metal Oxides by : H.H. Kung
Download or read book Transition Metal Oxides written by H.H. Kung and published by Elsevier. This book was released on 1989-04-01 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book the author presents an up-to-date summary of existing information on the structure, electronic properties, chemistry and catalytic properties of transition metal oxides. The subjects covered in the book can be divided into three sections. The first (chapters 1 to 3) covers the structural, physical, magnetic, and electronic properties of transition metal oxides. Although the emphasis is on surface properties, relevant bulk properties are also discussed. The second section (chapters 4 to 7) covers surface chemical properties. It includes topics that describe the importance of surface coordinative unsaturation in adsorption, the formation of surface acidity and the role of acidity in determining surface chemical properties, the nature and reactivities of adsorbed oxygen, and the surface chemistry in the reduction of oxides. The third section (chapters 8 to 14) is on the catalytic properties. Various catalytic reactions including decomposition, hydrogenation, isomerization, metathesis, selective oxidation, and reactions involving carbon oxides are discussed. Emphasis is placed more on reaction mechanisms and the role of catalysts than on kinetics and processes. Chapters on the preparation of oxide catalysts and on photo-assisted processes are also included. Whenever appropriate, relationships between various topics are indicated. Written for surface physicists, chemists, and catalytic engineers, the book will serve as a useful source of information for investigators and as a comprehensive overview of the subject for graduate students.
Download or read book Metal Oxides written by J.L.G. Fierro and published by CRC Press. This book was released on 2005-08-24 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemistry of metals has traditionally been more understood than that of its oxides. As catalytic applications continue to grow in a variety of disciplines, Metal Oxides: Chemistry and Applications offers a timely account of transition-metal oxides (TMO), one of the most important classes of metal oxides, in the context of catalysis. The
Book Synopsis Metal Oxides in Heterogeneous Catalysis by : Jacques C. Vedrine
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. Presents case studies in each chapter that provide a focus on the industrial applications Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book Nanocasting written by An-Hui Lu and published by Royal Society of Chemistry. This book was released on 2010 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials with tailored properties are regarded as a fundamental element in the development of future science and technology. Research is still ongoing into the nanosized construction elements required to create functional solids. The recently developed technique, nanocasting, has great advantage over others in terms of the synthesis of special nanostructured materials by the careful choice of suitable elements and nanoengineering steps. This new book summarizes the recent developments in nanocasting, including the principles of nanocasting, syntheses of novel nanostructured materials, characterization methods, detailed synthetic recipes and further possible development in this area. The book focuses on the synthesis of porous solids from the viewpoint of methodology and introduces the science of nanocasting from fundamental principles to their use in synthesis of various materials. It starts by outlining the principles of nanocasting, requirements to the templates and precursors and the tools needed to probe matter at the nanoscale level. It describes how to synthesize nano structured porous solids with defined characteristics and finally discusses the functionalization and application of porous solids. Special attention is given to new developments in this field and future perspectives. A useful appendix covering the detailed synthetic recipes of various templates including porous silica, porous carbon and colloidal spheres is included which will be invaluable to researchers wanting to follow and reproduce nanocast materials. Topics covered in the book include: * inorganic chemistry * organic chemistry * solution chemistry * sol-gel and interface science * acid-base equilibria * electrochemistry * biochemistry * confined synthesis The book gives readers not only an overview of nanocasting technology, but also sufficient information and knowledge for those wanting to prepare various nanostructured materials without needing to search the available literature.
Book Synopsis Catalytic Activities of Metal Oxides and Some Vanadate Salts in the Vapor Phase Reduction of 1-nitronaphthalene by : Ray Clifford Christena
Download or read book Catalytic Activities of Metal Oxides and Some Vanadate Salts in the Vapor Phase Reduction of 1-nitronaphthalene written by Ray Clifford Christena and published by . This book was released on 1951 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis On the Catalytic Activity of Certain Metals and Metallic Oxides by : Harvey Day Royce
Download or read book On the Catalytic Activity of Certain Metals and Metallic Oxides written by Harvey Day Royce and published by . This book was released on 1924 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis One-dimensional (1-D) Nanostructured Metal Oxides for Catalytic Oxidation of Hydrocarbons by : Yunzhe Feng
Download or read book One-dimensional (1-D) Nanostructured Metal Oxides for Catalytic Oxidation of Hydrocarbons written by Yunzhe Feng and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic oxidation of hydrocarbons has been intensively studied, with the purpose of minimizing emissions of pollutants and facilitating the combustion process. Noble metals, such as platinum and palladium, are the most effective catalysts for the oxidation of hydrocarbons. However, the limited supply of these noble metals imposes a need for developing alternative catalysts. Transition metal oxides are attractive alternatives due to their high thermal stability and low cost. Previous studies of metal oxide catalysts have focused on metal oxide nanoparticles (NPs) supported on porous substrates, such as Al2O3, ZrO2 and spinel-type (AB2O4) supports. Although the dispersed metal species over large surface area have shown much higher activity than the bulk metal oxide, there are several limitations. First, interactions between the support and NPs at high temperatures impede the fundamental understanding of the catalytic properties of individual NPs, and limit their application conditions. Moreover, the solid supports limit the loading of NPs because NPs tend to aggregate at large loadings, leading to a decrease in catalytic activity. Herein, one-dimensional (1-D) nanostructured metal oxide were directly grown on metal mesh substrates and used as catalysts for hydrocarbons oxidation. The 1-D nanostructured catalysts benefits from reduced interaction with the substrates, great flexibility in increasing the catalyst loading, and convenience in tuning the surface chemistry for higher catalytic activity, thus exhibit comparable or better catalytic activity and stability compared to the supported NPs. As one of the most active metal oxide catalysts, CuO was used as a model system to demonstrate the effectiveness of the 1-D nanostructured metal oxide catalysts. CuO NWs have been grown on Cu mesh by solid phase diffusion and applied to catalyze methane oxidation reactions. The CuO NWs have shown comparable or even better activity and stability than the supported CuO NPs. Moreover, owing to the fact that the NWs were exposed on the substrate surface and easy to access, two methods were used to tune the NWs for enhanced catalytic activity. The first one was to reduce the CuO NWs to more active Cu2O NWs by H2 plasma, which has shown 20% increase activity for CH4 oxidation reactions and several times higher activity for CO oxidation reactions. The kinetics study have shown that the bulk oxygen diffusion in Cu2O was faster, which could be one of the reasons for higher activity of Cu2O than that of CuO. The second tuning method was to decorate the CuO NWs with more active NP materials, such as Co3O4 and noble metals with a newly developed simple, fast and general sol-flame method. After the Co3O4 decoration, the CuO NWs surface was uniformly and densely covered by Co3O4 NP-chain structures, with large NP loading, high surface area and minimal aggregation, resulting in times higher activity in catalyzing CH4 oxidation. Moreover, this sol-flame method is a general method to decorate NWs with various NPs, and even to dope NWs with dopants for desirable properties. Given the generality and simplicity of the sol-flame methods, it can be applied to not only catalysis, but also other important application areas, such as lithium ion battery, supercapacitor and photoelectrochemical devices. In addition, to incorporate Cu and Co, the most active metal oxide catalyst Co3O4 was grown as 1-D structure on stainless steel mesh with the Cu2+ ion enhanced ammonia-evaporation-induced synthesis method. The synergetic effects of Cu and Co in catalytic process were studied, which have shown that the Cu2+ improved the nucleation and growth process of 1-D Co3O4, however, the catalytic activity is mainly from the Co species.
Book Synopsis The Influence of Surface Structure on the Catalytic Activity of Alumina Supported Transition Metal Oxides by : Paul Worn Park
Download or read book The Influence of Surface Structure on the Catalytic Activity of Alumina Supported Transition Metal Oxides written by Paul Worn Park and published by . This book was released on 1996 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Metal Oxides and Related Solids for Electrocatalytic Water Splitting by : Junlei Qi
Download or read book Metal Oxides and Related Solids for Electrocatalytic Water Splitting written by Junlei Qi and published by Elsevier. This book was released on 2022-05-16 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides and Related Solids for Electrocatalytic Water Splitting reviews the fundamentals and strategies needed to design and fabricate metal oxide-based electrocatalysts. After an introduction to the key properties of transition metal oxides, materials engineering methods to optimize the performance of metal-oxide based electrocatalysts are discussed. Strategies reviewed include defect engineering, interface engineering and doping engineering. Other sections cover important categories of metal-oxide (and related solids) based catalysts, including layered hydroxides, metal chalcogenides, metal phosphides, metal nitrides, metal borides, and more. Each chapter introduces important properties and material design strategies, including composite and morphology design. There is also an emphasis on cost-effective materials design and fabrication for optimized performance for electrocatalytic water splitting applications. Lastly, the book touches on recently developed in-situ characterization methods applied to observe and control the material synthesis process. Introduces metal oxide-based materials for electrocatalytic water splitting applications, including their key properties, synthesis, design and fabrication strategies Reviews the most relevant materials design strategies, including defect engineering, interface engineering, and doping engineering Discusses the pros and cons of metal oxide-based materials for water splitting applications to aid in materials selection
Download or read book TID. written by and published by . This book was released on 1955 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Liquid Phase Oxidation via Heterogeneous Catalysis by : Mario G. Clerici
Download or read book Liquid Phase Oxidation via Heterogeneous Catalysis written by Mario G. Clerici and published by John Wiley & Sons. This book was released on 2013-04-26 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets the stage for environmentally friendly industrial organic syntheses From basic principles to new and emerging industrial applications, this book offers comprehensive coverage of heterogeneous liquid-phase selective oxidation catalysis. It fully examines the synthesis, characterization, and application of catalytic materials for environmentally friendly organic syntheses. Readers will find coverage of all the important classes of catalysts, with an emphasis on their stability and reusability. Liquid Phase Oxidation via Heterogeneous Catalysis features contributions from an international team of leading chemists representing both industry and academia. The book begins with a chapter on environmentally benign oxidants and then covers: Selective oxidations catalyzed by TS-1 and other metal-substituted zeolites Selective catalytic oxidation over ordered nanoporous metallo-aluminophosphates Selective oxidations catalyzed by mesoporous metal-silicates Liquid phase oxidation of organic compounds by supported metal-based catalysts Selective liquid phase oxidations in the presence of supported polyoxometalates Selective oxidations catalyzed by supported metal complexes Liquid phase oxidation of organic compounds by metal-organic frameworks Heterogeneous photocatalysis for selective oxidations with molecular oxygen All the chapters dedicated to specific types of catalysts follow a similar organization and structure, making it easy to compare the advantages and disadvantages of different catalysts. The final chapter examines the latest industrial applications, such as the production of catechol and hydroquinone, cyclohexanone oxime, and propylene oxide. With its unique focus on liquid phase heterogeneous oxidation catalysis, this book enables researchers in organic synthesis and oxidation catalysis to explore and develop promising new catalytic materials and synthetic routes for a broad range of industrial applications.
Book Synopsis Metal Oxide Catalysis, 2 Volume Set by : S. David Jackson
Download or read book Metal Oxide Catalysis, 2 Volume Set written by S. David Jackson and published by John Wiley & Sons. This book was released on 2008-11-24 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its two-volume structure, this handbook and ready reference allows for comprehensive coverage of both characterization and applications, while uniform editing throughout ensures that the structure remains consistent. The result is an up-to-date review of metal oxides in catalysis. The first volume covers a range of techniques that are used to characterize oxides, with each chapter written by an expert in the field. Volume 2 goes on to cover the use of metal oxides in catalytic reactions. For all chemists and engineers working in the field of heterogeneous catalysis.
Book Synopsis Acid-Base Catalysis II by : H. Hattori
Download or read book Acid-Base Catalysis II written by H. Hattori and published by Elsevier. This book was released on 1994-11-01 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid acid catalysts are already being used in various processes in petroleum refining and are presently being studied intensively in both academic and applied fields for usage in a variety of reactions. Solid base catalysts are also gaining increasing recognition as potential catalysts. Both acidic and basic catalysts are promising not only with respect to acid and base-catalyzed reactions but also in materials sciences, such as the production of adsorbents, sensors, ceramics, etc. The present volume presents the text of 21 invited oral presentations and 58 poster presentations. The material covers a wide range of aspects on acid-base catalysis, from quantum chemistry to industrialized processes.
Book Synopsis The Catalytic Oxidation of Organic Compounds in the Vapor Phase by : Leroy Frank Marek
Download or read book The Catalytic Oxidation of Organic Compounds in the Vapor Phase written by Leroy Frank Marek and published by . This book was released on 1932 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Catalysis written by and published by Elsevier. This book was released on 2004-08-24 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 1948, Advances in Catalysis has filled the gap between the papers that report on and the textbooks that teach in the diverse areas of catalysis research. The editors of and contributors to Advances in Catalysis are dedicated to recording progress in this area. Advances in Catalysis, Volume 48, includes a description of a new and increasingly well understood class of catalysts (titanosilicates), a review of transmission electron microscopy and related methods applied to catalyst characterization, and summaries of the chemistry and processes of isobutane-alkene alkylation and partial oxidation and CO2 reforming of methane to synthesis gas. ยท Provides a comprehensive review of all aspects of catalytic research
Download or read book Air Pollution Abstracts written by and published by . This book was released on 1976 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:
