Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Comprehensive Characterization Of Voids And Microstructure In Tatb Based Explosives From 10 Nm To 1 Cm
Download Comprehensive Characterization Of Voids And Microstructure In Tatb Based Explosives From 10 Nm To 1 Cm full books in PDF, epub, and Kindle. Read online Comprehensive Characterization Of Voids And Microstructure In Tatb Based Explosives From 10 Nm To 1 Cm ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Comprehensive Characterization of Voids and Microstructure in TATB-based Explosives from 10 Nm to 1 Cm by :
Download or read book Comprehensive Characterization of Voids and Microstructure in TATB-based Explosives from 10 Nm to 1 Cm written by and published by . This book was released on 2010 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper outlines the characterization of voids and Microstructure in TATB-based Explosives over several orders of magnitude, from sizes on the order of 10 nm to about 1 cm. This is accomplished using ultra small angle x-ray scattering to investigate voids from a few nm to a few microns, ultra small angle neutron scattering for voids from 100 nm to 10 microns, and x-ray computed microtomography to investigate microstructure from a few microns to a few centimeters. The void distributions of LX-17 are outlined, and the microstructure of LX-17 is presented. Temperature cycling and compressive creep cause drastically different damage to the microstructure. Temperature cycling leads to a volume expansion (ratchet growth) in TATB-based explosives, and x-ray scattering techniques that are sensitive to sizes up to a few microns indicated changes to the void volume distribution that had previously accounted for most, but not all of the change in density. This paper presents the microstructural damage larger than a few microns caused by ratchet growth. Temperature cycling leads to void creation in the binder poor regions associated with the interior portion of formulated prills. Conversely, compressive creep causes characteristically different changes to microstructure; fissures form at binder-rich prill boundaries prior to mechanical failure.
Book Synopsis Towards Next Generation TATB-based Explosives by Understanding Voids and Microstructure from 10 Nm to 1 Cm by :
Download or read book Towards Next Generation TATB-based Explosives by Understanding Voids and Microstructure from 10 Nm to 1 Cm written by and published by . This book was released on 2009 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: TATB-based explosives have been investigated on length scales spanning several orders of magnitude, from just under 10 nm to larger than 1 cm. This has been accomplished using a combination of ultra-small angle x-ray scattering (USAXS), ultra-small angle neutron scattering (USANS), and x-ray computed tomography (XRCT). USAXS determines distributions the smallest structures including hot-spot voids from hundreds of nanometers to a few microns, USANS extends this range to about 10 microns, and two variants of XRCT cover sizes from microns to centimeters. Several examples are presented for LX-17, a triaminotrinitrobenzene based plastic bonded explosive using Kel-F 800. As an extension of previous USAXS results, in these proceedings, an alternate binder results in a more uniform microstructure for the PBX, useful towards design of next-generation TATB-based explosives. These data are an important step to understanding microstructural mechanisms that affect the mechanical properties of TATB-based explosives, and provide complete a comprehensive characterization of the structure of LX-17 from nanometers to centimeters that can be used as empirical input to computational models of detonation, and in determining the relationship between voids and microstructure to detonation properties.
Book Synopsis In-Situ Monitoring of the Microstructure of TATB-based Explosive Formulations During Temperature Cycling Using Ultra-small Angle X-ray Scattering by :
Download or read book In-Situ Monitoring of the Microstructure of TATB-based Explosive Formulations During Temperature Cycling Using Ultra-small Angle X-ray Scattering written by and published by . This book was released on 2008 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: TATB (1,3,5 triamino-2,4,6-trinitrobenzene), an extremely insensitive explosive, is used both in plastic-bonded explosives (PBXs) and as an ultra-fine pressed powder (UFTATB). With both PBXs and UFTATB, an irreversible expansion occurs with temperature cycling known as ratchet growth. In TATB-based explosives using Kel-F 800 as binder (LX-17 and PBX-9502), additional voids, sizes hundreds of nanometers to a few microns account for much of the volume expansion caused by temperature cycling. These voids are in the predicted size regime for hot-spot formation during ignition and detonation, and thus an experimental measure of these voids is important feedback for hot-spot theory and for determining the relationship between void size distributions and detonation properties. Also, understanding the mechanism of ratchet growth allows future choice of explosive/binder mixtures to minimize these types of changes to explosives, further extending PBX shelf life. This paper presents the void size distributions of LX-17, UFTATB, and PBXs using commercially available Cytop M, Cytop A, and Hyflon AD60 binders during temperature cycling between -55 C and 70 C. These void size distributions are derived from ultra-small angle x-ray scattering (USAXS), a technique sensitive to structures from about 10 nm to about 2 mm. Structures with these sizes do not appreciably change in UFTATB, indicating voids or cracks larger than a few microns appear in UFTATB during temperature cycling. Compared to Kel-F 800 binders, Cytop M and Cytop A show relatively small increases in void volume from 0.9% to 1.3% and 0.6% to 1.1%, respectively, while Hyflon fails to prevent irreversible volume expansion (1.2% to 4.6%). Computational mesoscale models of ratchet growth and binder wetting and adhesion properties point to mechanisms of ratchet growth, and are discussed in combination with the experimental results.
Book Synopsis Modeling the Thermal Deformation of TATB-based Explosives. Part 1 by :
Download or read book Modeling the Thermal Deformation of TATB-based Explosives. Part 1 written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: We detail a modeling approach to simulate the anisotropic thermal expansion of polycrystalline (1,3,5-triamino-2,4,6-trinitrobenzene) TATB-based explosives that utilizes microstructural information including porosity, crystal aspect ratio, and processing-induced texture. This report, the first in a series, focuses on nonlinear thermal expansion of "neat-pressed" polycrystalline TATB specimens which do not contain any binder; additional complexities related to polymeric binder and irreversible ratcheting behavior are briefly discussed, however detailed investigation of these aspects are deferred to subsequent reports. In this work we have, for the first time, developed a mesoscale continuum model relating the thermal expansion of polycrystal TATB specimens to their microstructural characteristics. A self-consistent homogenization procedure is used to relate macroscopic thermoelastic response to the constitutive behavior of single-crystal TATB. The model includes a representation of grain aspect ratio, porosity, and crystallographic texture attributed to the consolidation process. A quantitative model is proposed to describe the evolution of preferred orientation of graphitic planes in TATB during consolidation and an algorithm constructed to develop a discrete representation of the associated orientation distribution function. Analytical and numerical solutions using this model are shown to produce textures consistent with previous measurements and characterization for isostatic and uniaxial "die-pressed" specimens. Predicted thermal strain versus temperature for textured specimens are shown to be in agreement with corresponding experimental measurements. Using the developed modeling approach, several simulations have been run to investigate the influence of microstructure on macroscopic thermal expansion behavior. Results from these simulations are used to identify qualitative trends. Implications of the identified trends are discussed in the context of thermal deformation of engineered components whose consolidation process is generally more complex than isostatic or die-pressed specimens. Finally, an envisioned application of the modeling approach to simulating thermal expansion of weapon systems and components is outlined along with necessary future work to introduce the effects of binder and ratcheting behavior. Key conclusions from this work include the following. Both porosity and grain aspect ratio have an influence on the thermal expansion of polycrystal TATB considering realistic material variability. Thepreferred orientation of the single crystal TATB [001] poles within a polycrystal gives rise to pronounced anisotropy of the macroscopic thermal expansion. The extent of this preferred orientation depends on the magnitude of deformation, and consequently, is expected to vary spatially throughout manufactured components much like porosity. The modeling approach presented here has utility toward bringing spatially variable microstructural features into macroscale system engineering modelsAbstract Not Provided.
Book Synopsis Energetic Materials by : Ulrich Teipel
Download or read book Energetic Materials written by Ulrich Teipel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.
Book Synopsis Nondestructive Characterization of Materials IV by : J.F. Bussière
Download or read book Nondestructive Characterization of Materials IV written by J.F. Bussière and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a great deal of interest in extending nondestructive technologies beyond the location and identification of cracks and voids. Specifically there is growing interest in the application of nondestructive evaluation (NOEl to the measurement of physical and mechanical properties of materials. The measurement of materials properties is often referred to as materials characterization; thus nondestructive techniques applied to characterization become nondestructive characterization (NDCl. There are a number of meetings, proceedings and journals focused upon nondestructive technologies and the detection and identification of cracks and voids. However, the series of symposia, of which these proceedings represent the fourth, are the only meetings uniquely focused upon nondestructive characterization. Moreover, these symposia are especially concerned with stimulating communication between the materials, mechanical and manufacturing engineer and the NDE technology oriented engineer and scientist. These symposia recognize that it is the welding of these areas of expertise that is necessary for practical development and application of NDC technology to measurements of components for in service life time and sensor technology for intelligent processing of materials. These proceedings are from the fourth international symposia and are edited by c.o. Ruud, J. F. Bussiere and R.E. Green, Jr. . The dates, places, etc of the symposia held to date area as follows: Symposia on Nondestructive Methods for TITLE: Material Property Determination DATES: April 6-8, 1983 PLACE: Hershey, PA, USA CHAIRPERSONS: C.O. Ruud and R.E. Green, Jr.
Book Synopsis Fundamentals of Solid Propellant Combustion by : K. K. Kuo
Download or read book Fundamentals of Solid Propellant Combustion written by K. K. Kuo and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energetic Materials written by and published by Elsevier. This book was released on 2003-11-21 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of current research and recent advances in the area of energetic materials, focusing on explosives and propellants. The contents and format reflect the fact that theory, experiment and computation are closely linked in this field. The challenge of developing energetic materials that are less sensitive to accidental stimuli continues to be of critical importance. This volume opens with discussions of some determinants of sensitivity and its correlations with various molecular and crystal properties. The next several chapters deal in considerable detail with different aspects and mechanisms of the initiation of detonation, and its quantitative description. The second half of this volume focuses upon combustion. Extensive studies model ignition and combustion, with applications to different propellants. The final chapter is an exhaustive computational treatment of the mechanism and kinetics of combustion initiation reactions of ammonium perchlorate. Overall, this volume illustrates the progress that has been made in the field of energetic materials and some of the areas of current activity. It also indicates the challenges involved in characterizing and understanding the properties and behaviour of these compounds. The work is a unique state-of-the-art treatment of the subject, written by pre-eminent researchers in the field. - Overall emphasis is on theory and computation, presented in the context of relevant experimental work - Presents a unique state-of-the-art treatment of the subject - Contributors are preeminent researchers in the field
Book Synopsis High Energy Density Materials by : Thomas M. Klapötke
Download or read book High Energy Density Materials written by Thomas M. Klapötke and published by Springer. This book was released on 2007-06-12 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Nano-Energetic Materials by : Shantanu Bhattacharya
Download or read book Nano-Energetic Materials written by Shantanu Bhattacharya and published by Springer. This book was released on 2018-11-09 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research on the area of nano-energetic materials, their synthesis, fabrication, patterning, application and integration with various MEMS systems and platforms. Keeping in mind the applications for this field in aerospace and defense sectors, the articles in this volume contain contributions by leading researchers in the field, who discuss the current challenges and future perspectives. This volume will be of use to researchers working on various applications of high-energy research.
Book Synopsis Well Completion Design by : Jonathan Bellarby
Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour
Book Synopsis International Traffic in Arms Regulations (ITAR) (22 CFR 120-130). by : United States. Department of State
Download or read book International Traffic in Arms Regulations (ITAR) (22 CFR 120-130). written by United States. Department of State and published by . This book was released on 1993 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Chemistry and Physics of Energetic Materials by : S.N. Bulusu
Download or read book Chemistry and Physics of Energetic Materials written by S.N. Bulusu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents a collection of lectures presented at the NATO Advanced study Institute(ASI) on "Chemistry & Physics of the Molecular Processes in Energetic Materials", held at Hotel Torre Normanna, Altavilla Milicia, Sicily, Italy, September 3 to 15, 1989. The institute was attended by seventy participants including twenty lecturers, drawn from thirteen countries. The purpose of the institute was to review the major ad vances made in recent years in the theoretical and experi mental aspects of explosives and propellants. In accordance with the format of the NATO ASI, it was arranged to have a relatively small number of speakers to present in depth, re view type lectures emphasizing the basic research aspects of the subject, over a two week period. Most of the speakers gave two lectures, each in excess of one hour with addition al time for discussions. The scope of the meeting was limit ed to molecular and spectroscopic studies since the hydro dynamic aspects of detonation and various performance crite ria of energetic materials are often covered adequately in other international meetings. An attempt was made to have a coherent presentation of various theoretical, computational and spectroscopic approaches to help a better understanding of energetic materials from a molecular point of view. The progress already made in these areas is such that structure property (e. g.
Book Synopsis Polysaccharide Based Graft Copolymers by : Susheel Kalia
Download or read book Polysaccharide Based Graft Copolymers written by Susheel Kalia and published by Springer Science & Business Media. This book was released on 2013-05-23 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renowned experts give all essential aspects of the techniques and applications of graft copolymers based on polysaccharides. Polysaccharides are the most abundant natural organic materials and polysaccharide based graft copolymers are of great importance and widely used in various fields. Natural polysaccharides have recently received more attention due to their advantages over synthetic polymers by being non-toxic, biodegradable and available at low cost. Modification of polysaccharides through graft copolymerization improves the properties of polysaccharides. Grafting is known to improve the characteristic properties of the backbones. Such properties include water repellency, thermal stability, flame resistance, dye-ability and resistance towards acid-base attack and abrasion. Polysaccharides and their graft copolymers find extensive applications in diversified fields. Applications of modified polysaccharides include drug delivery devices, controlled release of fungicides, selective water absorption from oil-water emulsions, purification of water etc.
Book Synopsis Studies on the Polymorphs of HMX by : Howard H. Cady
Download or read book Studies on the Polymorphs of HMX written by Howard H. Cady and published by . This book was released on 1962 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Supercritical Fluids written by E. Kiran and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids are neither gas nor liquid, but can be compressed gradually from low to high density and they are therefore interesting and important as tunable solvents and reaction media in the chemical process industry. By adjusting the density the properties of these fluids can be customised and manipulated for a given process - physical or chemical transformation. Separation and processing using supercritical solvents such as CO2 are currently on-line commercially in the food, essential oils and polymer industries. Many agencies and industries are considering the use of supercritical water for waste remediation. Supercritical fluid chromatography represents another, major analytical application. Significant advances have recently been made in materials processing, ranging from particle formation to the creation of porous materials. The chapters in this book provide tutorial accounts of topical areas centred around: (1) phase equilibria, thermodynamics and equations of state; (2) critical behaviour, crossover effects; (3) transport and interfacial properties; (4) molecular modelling, computer simulation; (5) reactions, spectroscopy; (6) phase separation kinetics; (7) extractions; (8) applications to polymers, pharmaceuticals, natural materials and chromatography; (9) process scale-up.
Download or read book Energetic Materials written by and published by Elsevier Science. This book was released on 2003-11-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an overview of current research and recent advances in the area of energetic materials, focusing on decomposition, crystal and molecular properties. The contents and format reflect the fact that theory, experiment and computation are closely linked in this field. Since chemical decomposition is of fundamental importance in energetic performance, this volume begins with a survey of the decomposition processes of a variety of energetic compounds. This is followed by detailed studies of certain compounds and specific mechanisms, such as nitro/aci-nitro tautomerism. Chapter 6 covers the transition from decomposition to crystal properties, with molecular dynamics being the primary analytical tool. The next several chapters deal with different aspects of the crystalline state, again moving from the general to particular. There is also a discussion of methods for computing gas, liquid and solid phase heats of formation. Finally, the last portion of this volume looks at the potential of high-nitrogen molecules as energetic systems; this has been of considerable interest in recent years. Overall, this volume illustrates the progress that has been made in the field of energetic materials and some of the areas of current activity. It also indicates the challenges involved in characterizing and understanding the properties and behaviour of these compounds. The work is a unique state-of-the-art treatment of the subject, written by pre-eminent researchers in the field.
