Characterization Of Biomaterials

Download Characterization Of Biomaterials full books in PDF, epub, and Kindle. Read online Characterization Of Biomaterials ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Characterization of Biomaterials

Author : Mangal Roy
Publisher : Elsevier Inc. Chapters
ISBN 13 : 0128071036
Total Pages : 19 pages
Book Rating : 4.1/5 (28 download)

DOWNLOAD NOW!

Book Synopsis Characterization of Biomaterials by : Mangal Roy

Download or read book Characterization of Biomaterials written by Mangal Roy and published by Elsevier Inc. Chapters. This book was released on 2013-03-12 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: In joint replacement surgery with suboptimal bone, allograft materials are often used to achieve biological fixation of the metallic implant to the host bone and reducing the implant fixation time. The most commonly used techniques are cemented and hydroxyapatite (HA)-coated metallic implants. Typically, HA coatings are suggested for patients with better bone stock, whereas recommended implant fixation process for most other osteoporotic patients is bone cements. In general, there is a long-standing need to improve the performance of hip and other devices for longer in vivo implant lifetime that can help in reducing the number of revision surgeries, as well as minimizing physical and mental trauma to the patient. To achieve these goals, it is important to understand the mechanical and biological properties of coatings that can influence not only its short- and long-term bioactivity but also life span in vivo. Over the years, it has been recognized that the stability of a coated implant is governed by its physical and mechanical properties. A coating that separates from the implant provides no advantage over an uncoated implant and undesirable due to problems with debris materials, which can lead to osteolysis. Therefore, it is important to properly characterize the coated implants in terms of its physical and mechanical properties. In this chapter, specific details on coating characterization techniques including sample dimensions, sample preparation, experimental procedure and data interpretation are discussed. In particular, the standards and requirements of regulatory organizations are presented elucidating the significance and use of each characterization. It is important to appreciate that mechanical properties of coatings can only be determined with certain coating specification such as coating thickness. This chapter is designed even for non-experts to follow mechanical property characterizations of coatings on medical implants.

Characterization of Polymeric Biomaterials

Author : Maria Cristina Tanzi
Publisher : Woodhead Publishing
ISBN 13 : 0081007434
Total Pages : 503 pages
Book Rating : 4.0/5 (81 download)

DOWNLOAD NOW!

Book Synopsis Characterization of Polymeric Biomaterials by : Maria Cristina Tanzi

Download or read book Characterization of Polymeric Biomaterials written by Maria Cristina Tanzi and published by Woodhead Publishing. This book was released on 2017-06-20 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization of Polymeric Biomaterials presents a comprehensive introduction on the topic before discussing the morphology and surface characterization of biomedical polymers. The structural, mechanical, and biological characterization is described in detail, followed by invaluable case studies of polymer biomaterial implants. With comprehensive coverage of both theoretical and experimental information, this title will provide scientists with an essential guide on the topic of these materials which are regularly used for clinical applications, such as implants and drug delivery devices. However, a range of novel polymers and the development and modification of existing medical polymers means that there is an ongoing need to satisfy particular design requirements. This book explains the critical and fundamentals methods to characterize polymer materials for biomedical applications. - Presents a self-contained reference on the characterization of polymeric biomaterials - Provides comprehensive information on how to characterize biomedical polymers in order to improve design and synthesis - Includes useful case studies that demonstrate the characterization of biomaterial implants

Structural Biomaterials

Author : Cuie Wen
Publisher : Woodhead Publishing
ISBN 13 : 0128188324
Total Pages : 464 pages
Book Rating : 4.1/5 (281 download)

DOWNLOAD NOW!

Book Synopsis Structural Biomaterials by : Cuie Wen

Download or read book Structural Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2021-04-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Biomaterials: Properties, Characteristics, and Selection serves as a single point of reference to digest current research and develop a deeper understanding in the field of biomaterials engineering. This book uses a materials-focused approach, allowing the reader to quickly access specific, detailed information on biomaterials characterization and selection. Relevant to a range of readers, this book provides holistic coverage of the broad categories of structural biomaterials currently available and used in medical applications, highlighting the property requirements for structural biomaterials, their biocompatibility performance and their safety regulation in key categories such as metals, ceramics and polymers. The materials science perspective of this text ensures the content is accessible even to those without an extensive background in applied medicine, positioning this text not just for students, but as an overview and reference for researchers, scientists and engineers entering the field from related materials science disciplines. - Provides a unique, holistic approach, covering key biomaterials categories in one text, including metals, ceramics and polymers - Discusses advantages, disadvantages, biocompatibility performance and safety regulations, allowing for accurate materials selection in medical applications - Utilizes a materials science perspective, allowing those without an extensive applied medical background to learn about the field

Characterization of Biomaterials

Author : Amit Bandyopadhyay
Publisher : Newnes
ISBN 13 : 0124158633
Total Pages : 451 pages
Book Rating : 4.1/5 (241 download)

DOWNLOAD NOW!

Book Synopsis Characterization of Biomaterials by : Amit Bandyopadhyay

Download or read book Characterization of Biomaterials written by Amit Bandyopadhyay and published by Newnes. This book was released on 2013-03-12 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the key challenges current biomaterials researchers face is identifying which of the dizzying number of highly specialized characterization tools can be gainfully applied to different materials and biomedical devices. Since this diverse marketplace of tools and techniques can be used for numerous applications, choosing the proper characterization tool is highly important, saving both time and resources.Characterization of Biomaterials is a detailed and multidisciplinary discussion of the physical, chemical, mechanical, surface, in vitro and in vivo characterization tools and techniques of increasing importance to fundamental biomaterials research.Characterization of Biomaterials will serve as a comprehensive resource for biomaterials researchers requiring detailed information on physical, chemical, mechanical, surface, and in vitro or in vivo characterization. The book is designed for materials scientists, bioengineers, biologists, clinicians and biomedical device researchers seeking input on planning on how to test their novel materials, structures or biomedical devices to a specific application. Chapters are developed considering the need for industrial researchers as well as academics. - Biomaterials researchers come from a wide variety of disciplines: this book will help them to analyze their materials and devices taking advantage of the multiple experiences on offer - Coverage encompasses a cross-section of the physical sciences, biological sciences, engineering and applied sciences characterization community, providing gainful and cross-cutting insight into this highly multi-disciplinary field - Detailed coverage of important test protocols presents specific examples and standards for applied characterization

Marine Biomaterials

Author : Se-Kwon Kim
Publisher : CRC Press
ISBN 13 : 1466505648
Total Pages : 843 pages
Book Rating : 4.4/5 (665 download)

DOWNLOAD NOW!

Book Synopsis Marine Biomaterials by : Se-Kwon Kim

Download or read book Marine Biomaterials written by Se-Kwon Kim and published by CRC Press. This book was released on 2013-04-11 with total page 843 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oceans are an abundant source of diverse biomaterials with potential for an array of uses. Marine Biomaterials: Characterization, Isolation and Applications brings together the wide range of research in this important area, including the latest developments and applications, from preliminary research to clinical trials. The book is divided into four parts, with chapters written by experts from around the world. Biomaterials described come from a variety of marine sources, such as fish, algae, microorganisms, crustaceans, and mollusks. Part I covers the isolation and characterization of marine biomaterials—bioceramics, biopolymers, fatty acids, toxins and pigments, nanoparticles, and adhesive materials. It also describes problems that may be encountered in the process as well as possible solutions. Part II looks at biological activities of marine biomaterials, including polysaccharides, biotoxins, and peptides. Chapters examine health benefits of the biomaterials, such as antiviral activity, antidiabetic properties, anticoagulant and anti-allergic effects, and more. Part III discusses biomedical applications of marine biomaterials, including nanocomposites, and describes applications of various materials in tissue engineering and drug delivery. Part IV explores commercialization of marine-derived biomaterials—marine polysaccharides and marine enzymes—and examines industry perspectives and applications. This book covers the key aspects of available marine biomaterials for biological and biomedical applications, and presents techniques that can be used for future isolation of novel materials from marine sources.

Self-assembling Biomaterials

Author : Helena S. Azevedo
Publisher : Woodhead Publishing
ISBN 13 : 0081020120
Total Pages : 614 pages
Book Rating : 4.0/5 (81 download)

DOWNLOAD NOW!

Book Synopsis Self-assembling Biomaterials by : Helena S. Azevedo

Download or read book Self-assembling Biomaterials written by Helena S. Azevedo and published by Woodhead Publishing. This book was released on 2018-04-17 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Self-assembling biomaterials: molecular design, characterization and application in biology and medicine provides a comprehensive coverage on an emerging area of biomaterials science, spanning from conceptual designs to advanced characterization tools and applications of self-assembling biomaterials, and compiling the recent developments in the field. Molecular self-assembly, the autonomous organization of molecules, is ubiquitous in living organisms and intrinsic to biological structures and function. Not surprisingly, the exciting field of engineering artificial self-assembling biomaterials often finds inspiration in Biology. More important, materials that self-assemble speak the language of life and can be designed to seamlessly integrate with the biological environment, offering unique engineering opportunities in bionanotechnology. The book is divided in five parts, comprising design of molecular building blocks for self-assembly; exclusive features of self-assembling biomaterials; specific methods and techniques to predict, investigate and characterize self-assembly and formed assemblies; different approaches for controlling self-assembly across multiple length scales and the nano/micro/macroscopic properties of biomaterials; diverse range of applications in biomedicine, including drug delivery, theranostics, cell culture and tissue regeneration. Written by researchers working in self-assembling biomaterials, it addresses a specific need within the Biomaterials scientific community. - Explores both theoretical and practical aspects of self-assembly in biomaterials - Includes a dedicated section on characterization techniques, specific for self-assembling biomaterials - Examines the use of dynamic self-assembling biomaterials

Characterization of Biomaterials

Author : T.S. Sampath Kumar
Publisher : Elsevier Inc. Chapters
ISBN 13 : 012807096X
Total Pages : 49 pages
Book Rating : 4.1/5 (28 download)

DOWNLOAD NOW!

Book Synopsis Characterization of Biomaterials by : T.S. Sampath Kumar

Download or read book Characterization of Biomaterials written by T.S. Sampath Kumar and published by Elsevier Inc. Chapters. This book was released on 2013-03-12 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physicochemical properties of biomaterials exert a major influence over their interaction with cells and subsequently play an important role on the materials' in vivo performance . Physical characteristics involve internal microstructural features, shape and size of particles, porosity, density, and surface area. Characterization in terms of the chemistry involves determination of the chemical composition and distribution of the elements within the biomaterial. The last decade has seen several innovations in the armory of tools to image and analyze materials, as well as advancement in the collection and processing of those results. In this chapter, the most commonly used methods, which are available for the microstructural characterization of biomaterials, are explained with suitable examples. This chapter starts with microstructural characterization using different types of microscopic techniques including optical and electron microscopy. These techniques can provide information from atomic-scale to microscale to macroscale information. Specific examples are also used for specialized microscopic techniques such as scanning probe microscopy and atomic force microscopy. Some discussions were also used in -related surface characterization using microscopic techniques. Followed by microscopic techniques, phase analysis techniques are discussed based on X-ray diffraction. Short discussion is also placed on infrared (IR)-based spectroscopic characterization for chemical analysis. Further discussion on IR spectroscopy can be found in for surface analysis. The last part of this chapter deals with size, shape, porosity, surface area and surface energy characterization. Particle size analysis by dynamic light scattering (DLS) is discussed in detail followed by IR spectroscopic analysis. Contact angle measurement for surface energy, mercury intrusion porosimetry for analysis of pore structures and gas adsorption measurements for surface area analysis are presented in detail with relevant examples. Throughout this chapter, specific discussions are focused on examples based on applications as well as advantages, disadvantages, and challenges.

Biomaterials for Oral and Dental Tissue Engineering

Author : Lobat Tayebi
Publisher : Woodhead Publishing
ISBN 13 : 0081009674
Total Pages : 564 pages
Book Rating : 4.0/5 (81 download)

DOWNLOAD NOW!

Book Synopsis Biomaterials for Oral and Dental Tissue Engineering by : Lobat Tayebi

Download or read book Biomaterials for Oral and Dental Tissue Engineering written by Lobat Tayebi and published by Woodhead Publishing. This book was released on 2017-07-28 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials for Oral and Dental Tissue Engineering examines the combined impact of materials, advanced techniques and applications of engineered oral tissues. With a strong focus on hard and soft intraoral tissues, the book looks at how biomaterials can be manipulated and engineered to create functional oral tissue for use in restorative dentistry, periodontics, endodontics and prosthodontics. Covering the current knowledge of material production, evaluation, challenges, applications and future trends, this book is a valuable resource for materials scientists and researchers in academia and industry. The first set of chapters reviews a wide range of biomaterial classes for oral tissue engineering. Further topics include material characterization, modification, biocompatibility and biotoxicity. Part Two reviews strategies for biomaterial scaffold design, while chapters in parts three and four review soft and hard tissues. - Connects materials science with restorative dentistry - Focuses on the unique field of intraoral tissues - Highlights long-term biocompatibility and toxicity of biomaterials for engineered oral tissues

Characterisation and Design of Tissue Scaffolds

Author : Paul Tomlins
Publisher : Elsevier
ISBN 13 : 1782420959
Total Pages : 296 pages
Book Rating : 4.7/5 (824 download)

DOWNLOAD NOW!

Book Synopsis Characterisation and Design of Tissue Scaffolds by : Paul Tomlins

Download or read book Characterisation and Design of Tissue Scaffolds written by Paul Tomlins and published by Elsevier. This book was released on 2015-10-30 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterisation and Design of Tissue Scaffolds offers scientists a useful guide on the characterization of tissue scaffolds, detailing what needs to be measured and why, how such measurements can be made, and addressing industrially important issues. Part one provides readers with information on the fundamental considerations in the characterization of tissue scaffolds, while other sections detail how to prepare tissue scaffolds, discuss techniques in characterization, and present practical considerations for manufacturers. - Summarizes concepts and current practice in the characterization and design of tissue scaffolds - Discusses design and preparation of scaffolds - Details how to prepare tissue scaffolds, discusses techniques in characterization, and presents practical considerations for manufacturers

Handbook of Biomaterial Properties

Author : William Murphy
Publisher : Springer
ISBN 13 : 1493933051
Total Pages : 676 pages
Book Rating : 4.4/5 (939 download)

DOWNLOAD NOW!

Book Synopsis Handbook of Biomaterial Properties by : William Murphy

Download or read book Handbook of Biomaterial Properties written by William Murphy and published by Springer. This book was released on 2016-06-11 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides tabular and text data relating to normal and diseased tissue materials and materials used in medical devices. Comprehensive and practical for students, researchers, engineers, and practicing physicians who use implants, this book considers the materials aspects of both implantable materials and natural tissues and fluids. Examples of materials and topics covered include titanium, elastomers, degradable biomaterials, composites, scaffold materials for tissue engineering, dental implants, sterilization effects on material properties, metallic alloys, and much more. Each chapter author considers the intrinsic and interactive properties of biomaterials, as well as their appropriate applications and historical contexts. Now in an updated second edition, this book also contains two new chapters on the cornea and on vocal folds, as well as updated insights, data, and citations for several chapters.

Introduction to Biomaterials

Author : J. L. Ong
Publisher : Cambridge University Press
ISBN 13 : 0521116902
Total Pages : 421 pages
Book Rating : 4.5/5 (211 download)

DOWNLOAD NOW!

Book Synopsis Introduction to Biomaterials by : J. L. Ong

Download or read book Introduction to Biomaterials written by J. L. Ong and published by Cambridge University Press. This book was released on 2014 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: A succinct introduction to the field of biomaterials engineering, packed with practical insights.

Biomaterials Science and Technology

Author : Yaser Dahman
Publisher : CRC Press
ISBN 13 : 0429878354
Total Pages : 358 pages
Book Rating : 4.4/5 (298 download)

DOWNLOAD NOW!

Book Synopsis Biomaterials Science and Technology by : Yaser Dahman

Download or read book Biomaterials Science and Technology written by Yaser Dahman and published by CRC Press. This book was released on 2019-02-11 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomaterials Science and Technology: Fundamentals and Developments presents a broad scope of the field of biomaterials science and technology, focusing on theory, advances, and applications. It reviews the fabrication and properties of different classes of biomaterials such as bioinert, bioactive, and bioresorbable, in addition to biocompatibility. It further details traditional and recent techniques and methods that are utilized to characterize major properties of biomaterials. The book also discusses modifications of biomaterials in order to tailor properties and thus accommodate different applications in the biomedical engineering fields and summarizes nanotechnology approaches to biomaterials. This book targets students in advanced undergraduate and graduate levels in majors related to fields of Chemical Engineering, Materials Engineering and Science, Biomedical Engineering, Bioengineering, and Life Sciences. It assists in understanding major concepts of fabrication, modification, and possible applications of different classes of biomaterials. It is also intended for professionals who are interested in recent advances in the emerging field of biomaterials.

Introduction to Biomaterials

Author : Donglu Shi
Publisher : 清华大学出版社有限公司
ISBN 13 : 9787302108078
Total Pages : 280 pages
Book Rating : 4.1/5 (8 download)

DOWNLOAD NOW!

Book Synopsis Introduction to Biomaterials by : Donglu Shi

Download or read book Introduction to Biomaterials written by Donglu Shi and published by 清华大学出版社有限公司. This book was released on 2006 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a fundmaentally comprehensive introduction to most of the important biomaterials including ceramics, metals, and polymers.

Biomedical Materials

Author : Roger Narayan
Publisher : Springer Science & Business Media
ISBN 13 : 038784872X
Total Pages : 573 pages
Book Rating : 4.3/5 (878 download)

DOWNLOAD NOW!

Book Synopsis Biomedical Materials by : Roger Narayan

Download or read book Biomedical Materials written by Roger Narayan and published by Springer Science & Business Media. This book was released on 2009-06-20 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomedical Materials provides a comprehensive discussion of contemporary biomaterials research and development. Highlighting important topics associated with Engineering, Medicine and Surgery, this volume reaches a wide scope of professionals, researchers and graduate students involved with biomaterials. A pedagogical writing style and structure provides readers with an understanding of the fundamental concepts necessary to pursue research and industrial work on biomaterials, including characteristics of biomaterials, biological processes, biocompatibility, and applications of biomaterials in implants and medical instruments. Written by leading researchers in the field, this text book takes readers to the forefront of biomedical materials development, providing them with a taste of how the field is changing, while also serving as a useful reference to physicians and engineers.

Polymeric Gels

Author : Kunal Pal
Publisher : Woodhead Publishing
ISBN 13 : 0081021801
Total Pages : 570 pages
Book Rating : 4.0/5 (81 download)

DOWNLOAD NOW!

Book Synopsis Polymeric Gels by : Kunal Pal

Download or read book Polymeric Gels written by Kunal Pal and published by Woodhead Publishing. This book was released on 2018-06-15 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Gels: Characterization, Properties and Biomedical Applications covers the fundamentals and applications of polymeric gels. Particular emphasis is given to their synthesis, properties and characteristics, with topics such as natural, synthetic, and smart polymeric gels, medical applications, and advancements in conductive and magnetic gels presented. The book covers the basics and applications of hydrogels, providing readers with a comprehensive guide on the types of polymeric gels used in the field of biomedical engineering. - Provides guidance for decisions on the suitability and appropriateness of a synthetic route and characterization technique for particular polymeric networks - Analyzes and compares experimental data - Presents in-depth information on the physical properties of polymeric gels using mathematical models - Uses an interdisciplinary approach to discuss potential new applications for both established polymeric gels and recent advances

Biomaterials

Author : Seeram Ramakrishna
Publisher : CRC Press
ISBN 13 : 1420047825
Total Pages : 372 pages
Book Rating : 4.4/5 (2 download)

DOWNLOAD NOW!

Book Synopsis Biomaterials by : Seeram Ramakrishna

Download or read book Biomaterials written by Seeram Ramakrishna and published by CRC Press. This book was released on 2016-04-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are several well-known books on the market that cover biomaterials in a general way, but none provide adequate focus on the future of and potential for actual uses of emerging nanontechnology in this burgeoning field.Biomaterials: A Nano Approach is written from a multi-disciplinary point of view that integrates aspects of materials science a

Biomaterials in Clinical Practice

Author : Fatima Zivic
Publisher : Springer
ISBN 13 : 3319680250
Total Pages : 823 pages
Book Rating : 4.3/5 (196 download)

DOWNLOAD NOW!

Book Synopsis Biomaterials in Clinical Practice by : Fatima Zivic

Download or read book Biomaterials in Clinical Practice written by Fatima Zivic and published by Springer. This book was released on 2017-10-20 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the properties of biomaterials that have found wide clinical applications, while also reviewing the state-of-the-art in the development towards future medical applications, starting with a brief introduction to the history of biomaterials used in hip arthroplasty. The book then reviews general types of biomaterials – polymers, ceramics, and metals, as well as different material structures such as porous materials and coatings and their applications – before exploring various current research trends, such as biodegradable and porous metals, shape memory alloys, bioactive biomaterials and coatings, and nanometals used in the diagnosis and therapy of cancer. In turn, the book discusses a range of methods and approaches used in connection with biomaterial properties and characterization – chemical properties, biocompatibility, in vivo behaviour characterisation, as well as genotoxicity and mutagenicity – and reviews various diagnostic techniques: histopathological analysis, imagining techniques, and methods for physicochemical and spectroscopic characterization. Properties of stent deployment procedures in cardiovascular surgeries, from aspects of prediction, development and deployment of stent geometries are presented on the basis of novel modelling approaches. The last part of the book presents the clinical applications of biomaterials, together with case studies in dentistry, knee and hip prosthesis. Reflecting the efforts of a multidisciplinary team of authors, gathering chemical engineers, medical doctors, physicists and engineers, it presents a rich blend of perspectives on the application of biomaterials in clinical practice. The book will provide clinicians with an essential review of currently available solutions in specific medical areas, also incorporating non-medical solutions and standpoints, thus offering them a broader selection of materials and implantable solutions. This work is the result of joint efforts of various academic and research institutions participating in WIMB Tempus project, 543898-TEMPUS-1-2013-1-ES-TEMPUS-JPHES, "Development of Sustainable Interrelations between Education, Research and Innovation at WBC Universities in Nanotechnologies and Advanced Materials where Innovation Means Business", co-funded by the Tempus Programme of the European Union.