Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Automated Management Of Construction Projects
Download Automated Management Of Construction Projects full books in PDF, epub, and Kindle. Read online Automated Management Of Construction Projects ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Automated Management of Construction Projects by : Javad Majrouhi Sardroud
Download or read book Automated Management of Construction Projects written by Javad Majrouhi Sardroud and published by Majrouhi Sardroud. This book was released on 2011-07 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction projects are extremely complex and often take place in an uncontrolled and dynamic environment where each project goes through several phases leading to completion. In addition, projects in this industry suffer from quality problems, cost over-runs, and delays, which can be traced back to the lack of accurate and real-time information amongst the players. Because of this, modern construction management requires real-time and accurate information for sharing amongst all the parties involved, to undertake efficient and effective planning as well as execution of the projects. This book provides a new approach for automating the task of resources management in construction, integrating the latest innovations in ADC technologies (i.e. RFID, GPS, and GPRS). The proposed integrated system can facilitate extremely low-cost and infrastructure-free solutions to uniquely identify materials, components, and equipment and to track them in three phases, namely; production sites (off-site), shipping (en-route), and construction job sites (on-site) almost instantaneously. This book should assist contractors in automating the management of construction activities.
Book Synopsis Construction and Building Automation by : Benny Raphael
Download or read book Construction and Building Automation written by Benny Raphael and published by Taylor & Francis. This book was released on 2022-07-26 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to be used as a textbook in undergraduate civil engineering and construction courses to introduce cutting edge mechanical, electrical, and computer science topics that are needed for civil and construction engineers to collaborate in inter-disciplinary automation projects. Part I introduces the basics of hardware and software technologies that are needed for implementing automation in buildings and construction. The content begins with the fundamental concepts and uses practical examples to bring out the benefits of automation through case studies that are easy to understand. No other book uniformly treats the subject of automation within the context of buildings and construction activities. While the technology needed for these two application domains are similar, the unifying principles are not well recognized. This book will bring out the fundamental principles that could form the basis of application to these two domains. For example, it will become clear that sensors, actuators, and controllers, along with smart control strategies could be used for automating tasks within buildings and on construction sites. Part II of the book will introduce key advances in the areas of machine learning and artificial intelligence that are significant for the intelligent control of buildings and construction equipment. Control algorithms and techniques for data analytics are explained in a form that is appropriate for non-computer science students. Each chapter contains several hands-on exercises meant to apply the principles that are covered. These include numerical problems as well as design and analysis examples. This new textbook: • Introduces hardware and software needed for automating engineering tasks • Presents examples of applications in the control of building systems • Illustrates of the use of automation for improving construction processes • Provides a lucid introduction to advanced computing concepts, machine learning, artificial intelligence, and control algorithms to construction and engineering students. It is sure to be essential reading for a growing number of courses in smart construction, building automation, robotics, intelligent buildings, and construction 4.0. Supplementary material including answers to exercises in the book will be provided on the author’s website: https://bennyraphael.com/book2022/
Book Synopsis A Model for Automated Construction Materials Tracking by : Hassan Nasir
Download or read book A Model for Automated Construction Materials Tracking written by Hassan Nasir and published by . This book was released on 2008 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials management is a critical factor in construction project performance, particularly in the industrial sector. Research has shown that construction materials and installed equipment may constitute more than 50% of the total cost for a typical industrial project. Therefore the proper management of this single largest component can improve the productivity and cost efficiency of a project and help ensure its timely completion. One of the major problems associated with construction materials management is tracking materials in the supply chain and tracking their locations at job sites. Identification is integral to this process. Research projects conducted during the last decade to automate the identification and tracking of materials have concluded that such automation can increase productivity and cost efficiency as well as improve schedule performance, reduce the number of lost items, improve route and site optimization, and improve data entry. However, these technologies have been rapidly evolving, and knowledge concerning their implementation is sparse. One new approach enables locating of components within a few meters at a cost at least a magnitude lower than preceding technologies. It works by combining GPS located reads of RFID tags read at a rate of several thousand Hertz in order to estimate the location of these inexpensive tags which are attached to key construction materials. This technology was rapidly prototyped and deployed on two large industrial construction projects in 2007 and 2008. This thesis analyzes and synthesizes the data and experiences from these unique and large scale field trials as well as the literature in order to develop a general implementation model for automated construction materials tracking for industrial projects. It is concluded from the model that this new automated construction materials tracking technology is likely to be successful if implemented full scale on well selected future projects. This conclusion is supported by subsequent industry decisions.
Book Synopsis Robotics and Automation in Construction by : Carlos Balaguer
Download or read book Robotics and Automation in Construction written by Carlos Balaguer and published by IntechOpen. This book was released on 2008-10-01 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses several issues related to the introduction of automaton and robotics in the construction industry in a collection of 23 chapters. The chapters are grouped in 3 main sections according to the theme or the type of technology they treat. Section I is dedicated to describe and analyse the main research challenges of Robotics and Automation in Construction (RAC). The second section consists of 12 chapters and is dedicated to the technologies and new developments employed to automate processes in the construction industry. Among these we have examples of ICT technologies used for purposes such as construction visualisation systems, added value management systems, construction materials and elements tracking using multiple IDs devices. This section also deals with Sensorial Systems and software used in the construction to improve the performances of machines such as cranes, and in improving Human-Machine Interfaces (MMI). Authors adopted Mixed and Augmented Reality in the MMI to ease the construction operations. Section III is dedicated to describe case studies of RAC and comprises 8 chapters. Among the eight chapters the section presents a robotic excavator and a semi-automated façade cleaning system. The section also presents work dedicated to enhancing the force of the workers in construction through the use of Robotic-powered exoskeletons and body joint-adapted assistive units, which allow the handling of greater loads.
Book Synopsis Intelligent Buildings by : Brian Atkin
Download or read book Intelligent Buildings written by Brian Atkin and published by Ashgate Publishing. This book was released on 1993 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from architects, engineers, telecommunications experts, and information technology (IT) consultants provide overview of the state- of-the-art in all aspects of intelligent building technology. Contributors describe how intelligent buildings can be designed to incorporate the infrastructure required by contemporary communications and data-processing systems, and even how a "robot" building can function automatically with respect to environmental management, fire protection, and security. Annotation copyrighted by Book News, Inc., Portland, OR
Book Synopsis Artificial Intelligence in Construction Engineering and Management by : Limao Zhang
Download or read book Artificial Intelligence in Construction Engineering and Management written by Limao Zhang and published by Springer Nature. This book was released on 2021-06-18 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest technologies and applications of Artificial Intelligence (AI) in the domain of construction engineering and management. The construction industry worldwide has been a late bloomer to adopting digital technology, where construction projects are predominantly managed with a heavy reliance on the knowledge and experience of construction professionals. AI works by combining large amounts of data with fast, iterative processing, and intelligent algorithms (e.g., neural networks, process mining, and deep learning), allowing the computer to learn automatically from patterns or features in the data. It provides a wide range of solutions to address many challenging construction problems, such as knowledge discovery, risk estimates, root cause analysis, damage assessment and prediction, and defect detection. A tremendous transformation has taken place in the past years with the emerging applications of AI. This enables industrial participants to operate projects more efficiently and safely, not only increasing the automation and productivity in construction but also enhancing the competitiveness globally.
Book Synopsis Robotics and Automation in Construction by : Carlos Balaguer
Download or read book Robotics and Automation in Construction written by Carlos Balaguer and published by BoD – Books on Demand. This book was released on 2008-10-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses several issues related to the introduction of automaton and robotics in the construction industry in a collection of 23 chapters. The chapters are grouped in 3 main sections according to the theme or the type of technology they treat. Section I is dedicated to describe and analyse the main research challenges of Robotics and Automation in Construction (RAC). The second section consists of 12 chapters and is dedicated to the technologies and new developments employed to automate processes in the construction industry. Among these we have examples of ICT technologies used for purposes such as construction visualisation systems, added value management systems, construction materials and elements tracking using multiple IDs devices. This section also deals with Sensorial Systems and software used in the construction to improve the performances of machines such as cranes, and in improving Human-Machine Interfaces (MMI). Authors adopted Mixed and Augmented Reality in the MMI to ease the construction operations. Section III is dedicated to describe case studies of RAC and comprises 8 chapters. Among the eight chapters the section presents a robotic excavator and a semi-automated façade cleaning system. The section also presents work dedicated to enhancing the force of the workers in construction through the use of Robotic-powered exoskeletons and body joint-adapted assistive units, which allow the handling of greater loads.
Book Synopsis Integrated Field and Office Tools for Bridge Management by :
Download or read book Integrated Field and Office Tools for Bridge Management written by and published by . This book was released on 2004 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Automated Construction Data Management System by : Bob G. McCullough
Download or read book Automated Construction Data Management System written by Bob G. McCullough and published by . This book was released on 1991 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Automation and Robotics in the Architecture, Engineering, and Construction Industry by : Houtan Jebelli
Download or read book Automation and Robotics in the Architecture, Engineering, and Construction Industry written by Houtan Jebelli and published by Springer Nature. This book was released on 2022-01-03 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automation and Robotics in the Architecture, Engineering, and Construction Industry provides distinct and unified insight into current and future construction robotics, offering readers a comprehensive perspective for constructing a road map and illuminating improvements for a successful transition towards construction robotization. The book covers the fundamentals and applications of robotics, autonomous vehicles, and human-perceptive machines at construction sites. Through theoretical and experimental analyses, it examines the potential of robotics and automated systems for current and future fieldwork operations and identifies the factors that determine their implementation pace, adoption scale, and ubiquity throughout the industry. The book evaluates the technical, societal, and economic aspects of adopting robots in construction, both as standalone and collaborative systems, which in return can afford the opportunity to investigate these AI-enabled machines more systematically.
Book Synopsis The Future of Project Management by : Igor Vrečko
Download or read book The Future of Project Management written by Igor Vrečko and published by Cambridge Scholars Publishing. This book was released on 2023-11-14 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern project management is different from what it was ten years ago. New methods and tools have been developed, the number of projects and members in project teams has increased, professionalism in project management has generally increased, and projects have become highly complex. Parallel to this, artificial intelligence, automation, information and communication technology, human resources management, and many other areas are being developed, which will continue to impact project management in the future significantly. At the same time, new generations of young people are entering the labour market with different needs and expectations for project work. The authors of the book provide decision-makers, project workers, and students with an insight into the modern challenges of project management due to digitization, artificial intelligence and project economy. The book is based on knowledge of classic management principles but does not follow them blindly, arguing that modern project management is based on people, their values, and the intelligent use of methods, techniques, and emerging technologies.
Book Synopsis Automated Construction Management System (ACMS). Volume 2. Program Documentation by : C. E Herring (Jr)
Download or read book Automated Construction Management System (ACMS). Volume 2. Program Documentation written by C. E Herring (Jr) and published by . This book was released on 1984 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Automated Construction Management System (ACMS) has been developed to manage Army Engineer unit construction projects. It is a full-feature project management system implemented on a multiuser microcomputer system. The approach in developing the system was to exploit commercial software programs and hardware to minimize programming requirements and thus allow researchers to spend more time finding uses for the system. This volume contains the data base documentation for ACMS version 84.0, including system requirements, installation instructions, and program listings.
Book Synopsis Innovation in PMBOK through Industrial Revolution 4.0 by : Muhammad Musarat
Download or read book Innovation in PMBOK through Industrial Revolution 4.0 written by Muhammad Musarat and published by CRC Press. This book was released on 2024-04-25 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this textbook for upper-undergraduate and postgraduate students, Dr Ali and colleagues provide the reader with information on the effect of Industrial Revolution 4.0 on the construction industry, particularly regarding PMBOK knowledge areas. The authors furnish readers with an understanding of IR 4.0 and reasons for adopting it and provide an in-depth insight into the impact of IR 4.0 on technology and society, particularly in the construction industry. Further to this, they also compare traditional and IR 4.0 project manager’s competencies so that readers can develop their understanding of Project Management Knowledge areas and how IR 4.0 can be used to enhance these knowledge areas. The book is structured logically and sequentially to benefit even novice readers as they progress from basic to more advanced topics related to IR 4.0 and PMBOK. The final main chapter of this book provides an in-depth discussion of the enhancement of PMBOK knowledge areas using IR 4.0, including topics such as project integration management, IR 4.0 enhancements such as digitalization, and a conceptual framework for industry betterment. By the end of the book, readers will have the knowledge and skills to apply IR 4.0 techniques in their future careers in the construction industry. This book is an invaluable resource for students of construction engineering and management at upper-undergraduate and postgraduate levels and for existing industry professionals as part of their continuous professional development.
Book Synopsis Automated Defect Prevention by : Dorota Huizinga
Download or read book Automated Defect Prevention written by Dorota Huizinga and published by John Wiley & Sons. This book was released on 2007-08-24 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an approach to software management based on establishing an infrastructure that serves as the foundation for the project. This infrastructure defines people roles, necessary technology, and interactions between people and technology. This infrastructure automates repetitive tasks, organizes project activities, tracks project status, and seamlessly collects project data to provide measures necessary for decision making. Most importantly, this infrastructure sustains and facilitates the improvement of human-defined processes. The methodology described in the book, which is called Automated Defect Prevention (ADP) stands out from the current software landscape as a result of two unique features: its comprehensive approach to defect prevention, and its far-reaching emphasis on automation. ADP is a practical and thorough guide to implementing and managing software projects and processes. It is a set of best practices for software management through process improvement, which is achieved by the gradual automation of repetitive tasks supported and sustained by this flexible and adaptable infrastructure, an infrastructure that essentially forms a software production line. In defining the technology infrastructure, ADP describes necessary features rather than specific tools, thus remaining vendor neutral. Only a basic subset of features that are essential for building an effective infrastructure has been selected. Many existing commercial and non-commercial tools support these, as well as more advanced features. Appendix E contains such a list.
Book Synopsis Automating Cities by : Brydon T. Wang
Download or read book Automating Cities written by Brydon T. Wang and published by Springer Nature. This book was released on 2021-01-04 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest advancements in the use of automated systems in the design, construction, operation and future of the built environment and its occupants. It considers how the use of automated decision-making frameworks, artificial intelligence and other technologies of automation are presently impacting the practice of architects, engineers, project managers and contractors, and articulates the near future changes to workflows, legal frameworks and the wider AEC industry. This book surveys and compiles the use of city apps, robots that operate buildings and fabricate structural elements, 3D printing, drones, sensors, algorithms, and advanced prefabricated modules. The book also contributes to the growing literature on smart cities, and explores the impacts on data privacy and data sovereignty that arise through the use of sensors, digital twins and intelligent transport systems. It provides a useful reference for further research and development in the area of automation in design and construction to architects, engineers, project managers, superintendents and construction lawyers, contractors, policy makers, and students.
Book Synopsis An Economic Analysis on Automated Construction Safety by : Rita Yi Man Li
Download or read book An Economic Analysis on Automated Construction Safety written by Rita Yi Man Li and published by Springer. This book was released on 2017-08-09 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses information technologies recently applied in the field of construction safety. Combining case studies, literature reviews and interviews to study the issue, it presents cutting-edge applications of various information technologies (ITs) in construction in different parts of the world, together with a wealth of figures, tables and examples. Though primarily intended for researchers and experts in the field, the book will also benefit graduate students.
Book Synopsis Green Building Management and Smart Automation by : Solanki, Arun
Download or read book Green Building Management and Smart Automation written by Solanki, Arun and published by IGI Global. This book was released on 2019-07-05 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout the world, there is an increasing demand on diminishing natural resources in the industrial, transport, commercial, and residential sectors. Of these, the residential sector uses the most energy on such needs as lighting, water heating, air conditioning, space heating, and refrigeration. This sector alone consumes one-third of the total primary energy resources available. By using green building and smart automation techniques, this demand for energy resources can be lowered. Green Building Management and Smart Automation is an essential scholarly publication that provides an in-depth analysis of design technologies for green building and highlights the smart automation technologies that help in energy conservation, along with various performance metrics that are necessary to facilitate a building to be known as a “Green Smart Building.” Featuring a range of topics such as environmental quality, energy management, and big data analytics, this book is ideal for researchers, engineers, policymakers, government officials, architects, and students.
