Read Books Online and Download eBooks, EPub, PDF, Mobi, Kindle, Text Full Free.
Asme 2018 Nuclear Forum Collocated With The Asme 2018 Power Conference And The Asme 2018 12th International Conference On Energy Sustainability
Download Asme 2018 Nuclear Forum Collocated With The Asme 2018 Power Conference And The Asme 2018 12th International Conference On Energy Sustainability full books in PDF, epub, and Kindle. Read online Asme 2018 Nuclear Forum Collocated With The Asme 2018 Power Conference And The Asme 2018 12th International Conference On Energy Sustainability ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Engineering Psychology and Cognitive Ergonomics by : Don Harris
Download or read book Engineering Psychology and Cognitive Ergonomics written by Don Harris and published by Springer Nature. This book was released on 2023-07-08 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set LNCS 14017 - 14018 constitutes the thoroughly refereed proceedings of the 20th International Conference on Engineering Psychology and Cognitive Ergonomics, EPCE 2023, held as part of HCI International 2023 which took place in Copenhagen, Denmark, during July 23-28, 2023. A total of 1578 papers and 396 posters have been accepted for publication in the HCII 2023 proceedings from a total of 7472 submissions. The papers included in the HCII-EPCE volume set were organized in topical sections as follows: Part I: Stress, fatigue, and mental workload; human performance and error management; resilience and performance in demanding contexts. Part II: Human factors in aviation; human factors in operations management; human-centered design of autonomous systems.
Book Synopsis Proceedings of the 7th International Conference on Advances in Energy Research by : Manaswita Bose
Download or read book Proceedings of the 7th International Conference on Advances in Energy Research written by Manaswita Bose and published by Springer Nature. This book was released on 2020-10-17 with total page 1639 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the 7th International Conference on Advances in Energy Research (ICAER 2019), providing a comprehensive coverage encompassing all fields and aspects of energy in terms of generation, storage, and distribution. Themes such as optimization of energy systems, energy efficiency, economics, management, and policy, and the interlinkages between energy and environment are included. The contents of this book will be of use to researchers and policy makers alike.
Book Synopsis Solar Thermal Conversion Technologies for Industrial Process Heating by : T.V. Arjunan
Download or read book Solar Thermal Conversion Technologies for Industrial Process Heating written by T.V. Arjunan and published by CRC Press. This book was released on 2023-04-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar Thermal Conversion Technologies for Industrial Process Heating presents a comprehensive look at the use of solar thermal energy in industrial applications, such as textiles, chemical processing, and food. The successful projects implemented in a variety of industries are shown in case studies, alongside performance assessment methodologies. The book includes various solar thermal energy conversion technologies and new techniques and applications of solar collectors in industrial sectors. Features: Covers the key designs and novel technologies employed in the processing industries Discusses challenges in the incorporation of the solar thermal system in industrial applications Explores the techno-economic, environmental impact and life cycle analysis with government policies for promoting the system Includes real-world case studies Presents chapters written by global experts in the field The book will be useful for researchers, graduate students, and industry professionals with an aim to promote mutual understanding between sectors dealing with solar thermal energy.
Book Synopsis Handbook Of Solar Thermal Technologies: Concentrating Solar Power And Fuels (In 3 Volumes) by :
Download or read book Handbook Of Solar Thermal Technologies: Concentrating Solar Power And Fuels (In 3 Volumes) written by and published by World Scientific. This book was released on 2022-08-11 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume handbook showcases the state of the art in the use of concentrated sunlight to produce electricity, industrial process heat, renewable fuels, including hydrogen and low-carbon synthesis gas, and valuable chemical commodities. The handbook illustrates the value and diversity of applications for concentrating solar power to contribute to the expanding decarbonization of multiple cross-cutting energy sectors.Volume 1: Concentrating Solar Thermal Power, provides an overview of key technologies, principles, and challenges of concentrating solar power (CSP) as well as the use of concentrating solar thermal for process heating and district markets. The ten chapters of this volume provide the reader with the technical background on the solar resource for concentrating solar thermal, the principles and design of concentrating optics, and descriptions of state-of-the-art and emerging solar collector and receiver technologies, thermal storage and thermal-to-electric conversion and power cycles for CSP. It also contains a comprehensive summary of operations and maintenance requirements for CSP plants, and commercial CSP plants and markets around the world.Volume 2, Solar Thermochemical Processes and Products, covers the use of concentrated solar radiation as the heat source to drive endothermic chemical reactions to produce renewable fuels and valuable chemical commodities, equivalently storing solar energy in chemical bonds. The thermodynamic underpinnings of a number of approaches to produce fuel and results of demonstrations of solar thermochemical reactors for these processes at prototype scale are presented. Processes presented include thermochemical metal oxide reduction/oxidation cycles to split water and carbon dioxide solar chemical looping reformation of methane to produce synthesis gas, high temperature electrochemistry, and gasification of biomass. Research on the thermochemical storage for CSP and high temperature production of cement and ammonia to illustrate the use concentrated solar energy to produce valuable chemical products are also included.Volume 3 contains reprinted archival papers to support and supplement the material in Volumes 1 and 2. These papers provide background information on the economics and alternative use cases of CSP not covered in Volume 1, and expand on the material related to the chapter topics presented in Volume 2. Potential commercialization, such as prototype and demonstration projects, are highlighted. The papers are intended as a starting point for a more in-depth study of the topics.
Book Synopsis Design Optimization Under Uncertainty by : Weifei Hu
Download or read book Design Optimization Under Uncertainty written by Weifei Hu and published by Springer Nature. This book was released on 2023-12-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamentals of probability, statistical, and reliability concepts, the classical methods of uncertainty quantification and analytical reliability analysis, and the state-of-the-art approaches of design optimization under uncertainty (e.g., reliability-based design optimization and robust design optimization). The topics include basic concepts of probability and distributions, uncertainty quantification using probabilistic methods, classical reliability analysis methods, time-variant reliability analysis methods, fundamentals of deterministic design optimization, reliability-based design optimization, robust design optimization, other methods of design optimization under uncertainty, and engineering applications of design optimization under uncertainty.
Book Synopsis Thermofluid Modeling for Energy Efficiency Applications by : Mohammad Masud Kamal Khan
Download or read book Thermofluid Modeling for Energy Efficiency Applications written by Mohammad Masud Kamal Khan and published by Academic Press. This book was released on 2015-09-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermofluid Modeling for Sustainable Energy Applications provides a collection of the most recent, cutting-edge developments in the application of fluid mechanics modeling to energy systems and energy efficient technology. Each chapter introduces relevant theories alongside detailed, real-life case studies that demonstrate the value of thermofluid modeling and simulation as an integral part of the engineering process. Research problems and modeling solutions across a range of energy efficiency scenarios are presented by experts, helping users build a sustainable engineering knowledge base. The text offers novel examples of the use of computation fluid dynamics in relation to hot topics, including passive air cooling and thermal storage. It is a valuable resource for academics, engineers, and students undertaking research in thermal engineering. - Includes contributions from experts in energy efficiency modeling across a range of engineering fields - Places thermofluid modeling and simulation at the center of engineering design and development, with theory supported by detailed, real-life case studies - Features hot topics in energy and sustainability engineering, including thermal storage and passive air cooling - Provides a valuable resource for academics, engineers, and students undertaking research in thermal engineering
Book Synopsis Status of Fast Reactor Research and Technology Development by : International Atomic Energy Agency
Download or read book Status of Fast Reactor Research and Technology Development written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Based on a recommendation from the Technical Working Group on Fast Reactors, this publication is a regular update of previous publications on fast reactor technology. The publication provides comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors. The main issues of discussion are experience in design, construction, operation and decommissioning, various areas of research and development, engineering, safety and national strategies, and public acceptance of fast reactors. In the summary the reader will find national strategies, international initiatives on innovative (i.e. Generation IV) systems and an assessment of public acceptance as related to fast reactors."--Résumé de l'éditeur.
Book Synopsis Closed-cycle Gas Turbines by : Hans Ulrich Frutschi
Download or read book Closed-cycle Gas Turbines written by Hans Ulrich Frutschi and published by American Society of Mechanical Engineers. This book was released on 2005 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: "There is currently no comparable book available that covers both the history and future potential applications of closed-cycle gas turbines. This book is intended for design engineers and engineering managers in the worldwide gas turbine/power generation industry. Upper-level engineering students and schools of engineering would also benefit from this book, as it allows students to work and calculate different cycles and encourages them to make their own innovations."--Jacket.
Download or read book Combustion Noise written by Anna Schwarz and published by Springer Science & Business Media. This book was released on 2009-06-17 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: November, 2008 Anna Schwarz, Johannes Janicka In the last thirty years noise emission has developed into a topic of increasing importance to society and economy. In ?elds such as air, road and rail traf?c, the control of noise emissions and development of associated noise-reduction techno- gies is a central requirement for social acceptance and economical competitiveness. The noise emission of combustion systems is a major part of the task of noise - duction. The following aspects motivate research: • Modern combustion chambers in technical combustion systems with low pol- tion exhausts are 5 - 8 dB louder compared to their predecessors. In the ope- tional state the noise pressure levels achieved can even be 10-15 dB louder. • High capacity torches in the chemical industry are usually placed at ground level because of the reasons of noise emissions instead of being placed at a height suitable for safety and security. • For airplanes the combustion emissions become a more and more important topic. The combustion instability and noise issues are one major obstacle for the introduction of green technologies as lean fuel combustion and premixed burners in aero-engines. The direct and indirect contribution of combustion noise to the overall core noise is still under discussion. However, it is clear that the core noise besides the fan tone will become an important noise source in future aero-engine designs. To further reduce the jet noise, geared ultra high bypass ratio fans are driven by only a few highly loaded turbine stages.
Book Synopsis Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019) by : Andrey A. Radionov
Download or read book Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019) written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-14 with total page 1449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Book Synopsis Fluid Mechanics and Turbomachinery by : Bijay K Sultanian
Download or read book Fluid Mechanics and Turbomachinery written by Bijay K Sultanian and published by CRC Press. This book was released on 2021-07-21 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes over 250 solved problems to supplement graduate-level courses in fluid mechanics and turbomachinery. Enables students to practice applying key concepts of fluid mechanics and the governing conservation laws to solve real-world problems. Uses the physics-first approach, allowing for a good understanding of the problem physics and the results obtained. Covers problems on flowpath aerodynamics design. Covers problems on secondary air systems modeling of gas turbines.
Book Synopsis Fuel Cells: Technologies for Fuel Processing by : Dushyant Shekhawat
Download or read book Fuel Cells: Technologies for Fuel Processing written by Dushyant Shekhawat and published by Elsevier. This book was released on 2011-03-18 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells: Technologies for Fuel Processing provides an overview of the most important aspects of fuel reforming to the generally interested reader, researcher, technologist, teacher, student, or engineer. The topics covered include all aspects of fuel reforming: fundamental chemistry, different modes of reforming, catalysts, catalyst deactivation, fuel desulfurization, reaction engineering, novel reforming concepts, thermodynamics, heat and mass transfer issues, system design, and recent research and development. While no attempt is made to describe the fuel cell itself, there is sufficient description of the fuel cell to show how it affects the fuel reformer. By focusing on the fundamentals, this book aims to be a source of information now and in the future. By avoiding time-sensitive information/analysis (e.g., economics) it serves as a single source of information for scientists and engineers in fuel processing technology. The material is presented in such a way that this book will serve as a reference for graduate level courses, fuel cell developers, and fuel cell researchers. - Chapters written by experts in each area - Extensive bibliography supporting each chapter - Detailed index - Up-to-date diagrams and full colour illustrations
Book Synopsis Proceedings of International Conference on Intelligent Manufacturing and Automation by : Hari Vasudevan
Download or read book Proceedings of International Conference on Intelligent Manufacturing and Automation written by Hari Vasudevan and published by Springer. This book was released on 2018-11-04 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the outcomes of the International Conference on Intelligent Manufacturing and Automation (ICIMA 2018) organized by the Departments of Mechanical Engineering and Production Engineering at Dwarkadas J. Sanghvi College of Engineering, Mumbai, and the Indian Society of Manufacturing Engineers. It includes original research and the latest advances in the field, focusing on automation, mechatronics and robotics; CAD/CAM/CAE/CIM/FMS in manufacturing; product design and development; DFM/DFA/FMEA; MEMS and Nanotechnology; rapid prototyping; computational techniques; industrial engineering; manufacturing process management; modelling and optimization techniques; CRM, MRP and ERP; green, lean, agile and sustainable manufacturing; logistics and supply chain management; quality assurance and environment protection; advanced material processing and characterization; and composite and smart materials.
Book Synopsis Thermo-Mechanical Modeling of Additive Manufacturing by : Michael Gouge
Download or read book Thermo-Mechanical Modeling of Additive Manufacturing written by Michael Gouge and published by Butterworth-Heinemann. This book was released on 2017-08-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-mechanical Modeling of Additive Manufacturing provides the background, methodology and description of modeling techniques to enable the reader to perform their own accurate and reliable simulations of any additive process. Part I provides an in depth introduction to the fundamentals of additive manufacturing modeling, a description of adaptive mesh strategies, a thorough description of thermal losses and a discussion of residual stress and distortion. Part II applies the engineering fundamentals to direct energy deposition processes including laser cladding, LENS builds, large electron beam parts and an exploration of residual stress and deformation mitigation strategies. Part III concerns the thermo-mechanical modeling of powder bed processes with a description of the heat input model, classical thermo-mechanical modeling, and part scale modeling. The book serves as an essential reference for engineers and technicians in both industry and academia, performing both research and full-scale production. Additive manufacturing processes are revolutionizing production throughout industry. These technologies enable the cost-effective manufacture of small lot parts, rapid repair of damaged components and construction of previously impossible-to-produce geometries. However, the large thermal gradients inherent in these processes incur large residual stresses and mechanical distortion, which can push the finished component out of engineering tolerance. Costly trial-and-error methods are commonly used for failure mitigation. Finite element modeling provides a compelling alternative, allowing for the prediction of residual stresses and distortion, and thus a tool to investigate methods of failure mitigation prior to building. - Provides understanding of important components in the finite element modeling of additive manufacturing processes necessary to obtain accurate results - Offers a deeper understanding of how the thermal gradients inherent in additive manufacturing induce distortion and residual stresses, and how to mitigate these undesirable phenomena - Includes a set of strategies for the modeler to improve computational efficiency when simulating various additive manufacturing processes - Serves as an essential reference for engineers and technicians in both industry and academia
Book Synopsis Computational and Experimental Simulations in Engineering by : Hiroshi Okada
Download or read book Computational and Experimental Simulations in Engineering written by Hiroshi Okada and published by Springer Nature. This book was released on 2019-11-16 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational engineering, as presented by leading international researchers and engineers at the 24th International Conference on Computational & Experimental Engineering and Sciences (ICCES), held in Tokyo, Japan on March 25-28, 2019. ICCES covers all aspects of applied sciences and engineering: theoretical, analytical, computational, and experimental studies and solutions of problems in the physical, chemical, biological, mechanical, electrical, and mathematical sciences. As such, the book discusses highly diverse topics, including composites; bioengineering & biomechanics; geotechnical engineering; offshore & arctic engineering; multi-scale & multi-physics fluid engineering; structural integrity & longevity; materials design & simulation; and computer modeling methods in engineering. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.
Book Synopsis Active Fault Tolerant Control Systems by : Mufeed Mahmoud
Download or read book Active Fault Tolerant Control Systems written by Mufeed Mahmoud and published by Springer Science & Business Media. This book was released on 2003-02-13 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern technological systems rely on sophisticated control functions to meet increased performance requirements. For such systems, Fault Tolerant Control Systems (FTCS) need to be developed. Active FTCS are dependent on a Fault Detection and Identification (FDI) process to monitor system performance and to detect and isolate faults in the systems. The main objective of this book is to study and to validate some important issues in real-time Active FTCS by means of theoretical analysis and simulation. Several models are presented to achieve this objective, taking into consideration practical aspects of the system to be controlled, performance deterioration in FDI algorithms, and limitations in reconfigurable control laws.
Book Synopsis Electronic Systems and Intelligent Computing by : Pradeep Kumar Mallick
Download or read book Electronic Systems and Intelligent Computing written by Pradeep Kumar Mallick and published by Springer Nature. This book was released on 2020-09-22 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected, high-quality research papers from the International Conference on Electronic Systems and Intelligent Computing (ESIC 2020), held at NIT Yupia, Arunachal Pradesh, India, on 2 – 4 March 2020. Discussing the latest challenges and solutions in the field of smart computing, cyber-physical systems and intelligent technologies, it includes papers based on original theoretical, practical and experimental simulations, developments, applications, measurements, and testing. The applications and solutions featured provide valuable reference material for future product development.
