Army Tactics, Techniques, and Procedures Attp 3-34.80 (FM 3-34.230, FM 5-33, and Tc 5-230) Geospatial Engineering July 2010

Download Army Tactics, Techniques, and Procedures Attp 3-34.80 (FM 3-34.230, FM 5-33, and Tc 5-230) Geospatial Engineering July 2010 PDF Online Free

Author :
Publisher : CreateSpace
ISBN 13 : 9781484168820
Total Pages : 108 pages
Book Rating : 4.1/5 (688 download)

DOWNLOAD NOW!


Book Synopsis Army Tactics, Techniques, and Procedures Attp 3-34.80 (FM 3-34.230, FM 5-33, and Tc 5-230) Geospatial Engineering July 2010 by : United States Government US Army

Download or read book Army Tactics, Techniques, and Procedures Attp 3-34.80 (FM 3-34.230, FM 5-33, and Tc 5-230) Geospatial Engineering July 2010 written by United States Government US Army and published by CreateSpace. This book was released on 2013-04-20 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geospatial engineering capabilities have experienced significant improvements due to organizational changes, technological advancements, and emerging best practices. Geospatial engineering leverages ever-finer temporal and spatial resolutions from additional sensors and platforms that allow increased volumes and more complex data. New methods and technologies provide additional utility and the ability to work effectively within a broad pool of partners and allies.Army Tactics, Techniques, and Procedures (ATTP) 3-34.80 describes doctrine for geospatial engineering operations at all echelons. It is an extension of Field Manual (FM) 3-34 and is linked to joint and other Army doctrine to ensure its usefulness for operational-level commanders and staff. This manual serves as a guide for the integration of geospatial engineering in support of full spectrum operations at all echelons, with added focus on describing the "how-to" within divisions and the brigades. This publication applies to the Active Army, Army National Guard, Army National Guard of the United States, and the United States Army Reserve unless otherwise stated.ATTP 3-34.80 combines, updates, and supersedes material from FM 3-34.230, FM 5-33, and Training Circular (TC) 5-230 and is built directly on new or revised joint and Army doctrine, notably Army capstone doctrine found in FM 3-0 and engineer keystone doctrine presented in FM 3-34. This revision also captures the results of lessons learned and observations from recent operational experiences in Afghanistan, Iraq, and other locations, to include the challenges of operating in complex terrain. This manual will serve as a reference document for engineer commanders and staff, leaders, training developers, and doctrine developers throughout the Army. It will be a primary manual for instructional purposes in the United States Army Engineer School (USAES) and will help other Army branch schools in teaching the integration of geospatial engineering capabilities into Army operations.The manual is organized into three chapters, with supporting appendixes, which sequentially describe geospatial engineering, the roles and responsibilities for integrating geospatial support at the various echelons, and how it is integrated within the Army's operations process. A brief description of each of the chapters and appendixes is provided below.* Chapter 1 describes the role of geospatial engineering in supporting full spectrum operations and its importance for understanding the operational environment (OE).* Chapter 2 discusses the geospatial engineering capabilities that reside within each of the echelons down to the BCT. It also describes the critical roles and responsibilities that national- and defense- level agencies and Army units and staffs have in providing geospatial engineering in support of Army operations.* Chapter 3 focuses on the "how-to" for integrating geospatial engineering capabilities into the Army operations process.* Appendix A provides examples of geospatial products that aid terrain visualization and support decisionmaking.* Appendix B provides information on gathering, storing, and disseminating relevant digital terrain data that support operations and enable decisionmaking.* Appendix C outlines the format and provides examples of GI for inclusion in Army mission plans and orders.* Appendix D describes the six characteristics of terrain that geospatial engineers analyze in determining the terrain's effects on operations.* Appendix E further describes the geospatial engineering organizations that support each echelon down to BCT.* Appendix F describes the digital topographic support system (DTSS) family of systems that geospatial engineers use to support mission requirements.

Army Tactics, Techniques, and Procedures ATTP 5-0.1 Commander and Staff Officer Guide September 2011

Download Army Tactics, Techniques, and Procedures ATTP 5-0.1 Commander and Staff Officer Guide September 2011 PDF Online Free

Author :
Publisher : Lulu.com
ISBN 13 : 1300870877
Total Pages : 295 pages
Book Rating : 4.3/5 (8 download)

DOWNLOAD NOW!


Book Synopsis Army Tactics, Techniques, and Procedures ATTP 5-0.1 Commander and Staff Officer Guide September 2011 by : United States Government US Army

Download or read book Army Tactics, Techniques, and Procedures ATTP 5-0.1 Commander and Staff Officer Guide September 2011 written by United States Government US Army and published by Lulu.com. This book was released on 2013-03-24 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Army tactics, techniques, and procedures (ATTP) reinforces the fundamentals of mission command established in field manual (FM) 3-0, Operations; FM 5-0, The Operations Process; and FM 6-0, Mission Command. Whereas the above manuals focus on the fundamentals of mission command, this manual provides commanders and staff officers with tactics, techniques, and procedures (TTP) essential for the exercise of mission command.This is a new Army publication. It includes many of the appendices currently found in FM 5-0 and FM 6-0 that addressed the "how to" of mission command. By consolidating this material into a single publication, Army leaders now have a single reference to assist them with TTP associated with planning, preparing for, executing, and continually assessing operations. This ATTP also enables the Army to better focus the material in future editions of FMs 5-0 and 6-0 on the fundamentals of the operations process and mission command, respectively.

Army Tactics, Techniques, and Procedures Attp 3-06.11 (Fm 3-06.11) Combined Arms Operations in Urban Terrain

Download Army Tactics, Techniques, and Procedures Attp 3-06.11 (Fm 3-06.11) Combined Arms Operations in Urban Terrain PDF Online Free

Author :
Publisher : CreateSpace
ISBN 13 : 9781484011676
Total Pages : 284 pages
Book Rating : 4.0/5 (116 download)

DOWNLOAD NOW!


Book Synopsis Army Tactics, Techniques, and Procedures Attp 3-06.11 (Fm 3-06.11) Combined Arms Operations in Urban Terrain by : United States Government Army

Download or read book Army Tactics, Techniques, and Procedures Attp 3-06.11 (Fm 3-06.11) Combined Arms Operations in Urban Terrain written by United States Government Army and published by CreateSpace. This book was released on 2013-04-01 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Tactics, Techniques, and Procedures (ATTP) 3-06.11 establishes doctrine for combined arms operations in urban terrain for the brigade combat team (BCT) and battalion/squadron commanders and staffs, company/troop commanders, small-unit leaders, and individual Soldiers. The continued trend worldwide of urban growth and the shift of populations from rural to urban areas continues to affect Army operations. The urban environment, consisting of complex terrain, dense populations, and integrated infrastructures, is the predominant operational environment in which Army forces currently operate. Each urban environment is unique and differs because of the combinations presented by the enemy, the urban area itself, the major operation of which it may be part (or the focus), and always changing societal and geopolitical considerations. Enemy forces will take advantage of this complex environment by intermingling with the populace. ATTP 3-06.11 describes the fundamental principles, tactics, techniques, and procedures (TTP) of urban operations (UO) across full spectrum operations, using the UO operational construct (understand, shape, engage, consolidate, and transition) to outline the discussions. ATTP 3-06.11 is based on current BCT structure and lessons learned from ongoing UO. ATTP 3-06.11 primarily addresses offensive and defensive operations in an urban environment. Stability operations are briefly discussed in the context of transition considerations. Stability operations are inherently among the people and generally in urban environments. Field manual (FM) 3-07 is the source manual for stability doctrine and addresses BCT considerations for conducting stability UO. FM 3-07.1 is the primary source for BCT and below considerations for interaction and support to host nation (HN) security forces. This material is not repeated in ATTP 3-06.11. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. The proponent for this publication is the U.S. Army Training and Doctrine Command (TRADOC). The preparing agency is the U.S. Army Maneuver Center of Excellence (MCoE). Urban operations are among the most difficult and challenging missions a BCT can undertake. Most UO are planned and controlled at division or corps level but executed by BCTs. The unified action environment of UO enables and enhances the capabilities of the BCT to plan, prepare, and execute offensive, defensive, and stability operations. Urban operations are Infantry-centric combined arms operations that capitalize on the adaptive and innovative leaders at the squad, platoon, and company level. Combined arms is the synchronized and simultaneous application of the elements of combat power to achieve an effect greater than if each element of combat power was used separately or sequentially. The eight elements of combat power are leadership, information, movement and maneuver, intelligence, fires, sustainment, mission command, and protection. Leadership and information are applied through, and multiply the effects of, the other six elements of combat power. These six-movement and maneuver, intelligence, fires, sustainment, mission command, and protection-are collectively described as the warfighting functions. (See FM 3-0 for details.) The BCT is the Army's largest fixed combined arms organization and the primary close combat force. A key component in UO is the inherent ability of the BCT to tailor its force to meet the requirements of the urban environment. This introduction provides an overview of UO considerations that shape the subsequent discussions of operations at BCT and below.

Army Tactics Techniques and Procedures Attp 3-97.11 (FM 31-70 and FM 31-71) McRp 12-10a.4 (Formerly McRp 3-35.1d) Cold Region Operations 2 May 2006

Download Army Tactics Techniques and Procedures Attp 3-97.11 (FM 31-70 and FM 31-71) McRp 12-10a.4 (Formerly McRp 3-35.1d) Cold Region Operations 2 May 2006 PDF Online Free

Author :
Publisher : Createspace Independent Publishing Platform
ISBN 13 : 9781541343801
Total Pages : 112 pages
Book Rating : 4.3/5 (438 download)

DOWNLOAD NOW!


Book Synopsis Army Tactics Techniques and Procedures Attp 3-97.11 (FM 31-70 and FM 31-71) McRp 12-10a.4 (Formerly McRp 3-35.1d) Cold Region Operations 2 May 2006 by : United States Army

Download or read book Army Tactics Techniques and Procedures Attp 3-97.11 (FM 31-70 and FM 31-71) McRp 12-10a.4 (Formerly McRp 3-35.1d) Cold Region Operations 2 May 2006 written by United States Army and published by Createspace Independent Publishing Platform. This book was released on 2016-12-29 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Tactics Techniques and Procedures ATTP 3-97.11 (FM 31-70 and FM 31-71) MCRP 12-10A.4 (Formerly MCRP 3-35.1D) Cold Region Operations 2 May 2006 This Army tactics, techniques, and procedures (ATTP)/Marine Corps reference publication (MCRP) is the Army's doctrinal publication for operations in the cold region environment. Marines can utilize this publication as an operational reference with the 3-35 doctrinal series. It provides doctrinal guidance and direction for how United States (U.S.) forces conduct cold region operations. The purpose of ATTP 3-97.11/MCRP 3-35.1D is to arm leaders, Soldiers, and Marines with the necessary knowledge on how to operate in cold region environments. The information contained in this manual applies to all Soldiers and Marines, regardless of rank or job specialty. This manual is designed to work with and complement field manual (FM) 3-97.6, Mountain Operations, and FM 3-97.61, Military Mountaineering. This manual will enable leaders, Soldiers, and Marines to accurately describe cold region environments, their effects on military equipment, impacts these environments have on personnel, and most importantly, how to employ the elements of combat power in cold region environments. This ATTP provides the conceptual framework for conventional forces to conduct cold region operations within the construct of full spectrum operations, across the spectrum of conflict. It addresses cold region operations at operational and tactical levels. Chapter 1 discusses the characteristics of the cold region environment. Chapter 2 discusses the operations process. Chapter 3 identifies and discusses special considerations for operations in a cold region environment. Chapter 4 discusses how to conduct movement and maneuver in a cold region environment. Chapter 5 discusses how to apply sustainment principles unique to cold regions. Chapter 6 discusses how to apply combat power in the cold region environment. The two appendixes detail the special uniform, equipment, and heaters necessary in the cold region environment.

Army Techniques Publication Atp 3-34.80 Geospatial Engineering June 2014

Download Army Techniques Publication Atp 3-34.80 Geospatial Engineering June 2014 PDF Online Free

Author :
Publisher : CreateSpace
ISBN 13 : 9781500736750
Total Pages : 116 pages
Book Rating : 4.7/5 (367 download)

DOWNLOAD NOW!


Book Synopsis Army Techniques Publication Atp 3-34.80 Geospatial Engineering June 2014 by : United States Government Us Army

Download or read book Army Techniques Publication Atp 3-34.80 Geospatial Engineering June 2014 written by United States Government Us Army and published by CreateSpace. This book was released on 2014-08-04 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication, Army Techniques Publication ATP 3-34.80 Geospatial Engineering June 2014, provides doctrine for geospatial engineering operations at all echelons. It is an extension of FM 3-34 and is linked to joint and other Army doctrine to ensure its usefulness for operational level commanders and staff. This manual serves as a guide for the integration of geospatial engineering in support of unified land operations at all echelons, with added focus on describing geospatial engineering within divisions and brigades. The principal audience for ATP 3-34.80 is engineer commanders and staff officers, but all Army leaders will benefit from reading it. Trainers, combat developers, and educators throughout the Army will also use this manual. This manual will help other Army branch schools in teaching the integration of geospatial engineering capabilities into Army operations. This manual describes the application of geospatial engineering in support of Army forces conducting unified land operations. It also acknowledges that Army doctrine remains dynamic-balancing current capabilities and situations with projected requirements for future operations. As geospatial engineer capabilities continue to improve through organizational changes, technological advancements, and emerging best practices, leaders and planners at all levels will be charged to leverage those improvements and adapt the processes and procedures that are described in this manual to meet the demands and provide the most effective geospatial support possible to the commander. ATP 3-34.80 is built directly on new or revised joint and Army doctrine, notably Army capstone doctrine that is found in ADP 3-0 and FM 3-34. This revision also captures the results of the lessons learned and the observations from recent operational experiences in Afghanistan, Iraq, and other locations, to include the challenges of operating in complex terrain. ATP 3-34.80 is organized into four chapters, with supporting appendixes that sequentially describe geospatial engineering, the roles and responsibilities for integrating geospatial support at the various echelons, and the integration of geospatial engineering within the Army operations process. A brief description of the chapters and appendixes follows: Chapter 1, Support to Unified Land Operations, describes the role of geospatial engineering in supporting unified land operations. It also describes the critical roles that geospatial engineering units and staffs have in providing geospatial engineering in support of Army operations. Chapter 2, Army Geospatial Enterprise, focuses on defining the Army Geospatial Enterprise (AGE) and SSGF. Chapter 3, Roles and Responsibilities, discusses the geospatial engineering capabilities that reside within the echelons above brigade down to the brigade combat team (BCT). Chapter 4, Geospatial Support Integration, focuses on how to integrate geospatial engineering capabilities into the Army operations process. Appendix A provides a metric conversion chart. Appendix B, Geospatial Products, provides examples of geospatial products that aid in terrain visualization and support decisionmaking. Appendix C, Geospatial Data Management, provides information on gathering, storing, and disseminating relevant digital terrain data that supports operations and enables decisionmaking. Appendix D, Terrain Characteristics, describes the six characteristics of terrain that geospatial engineers analyze in determining the terrain effects on operations. Appendix E, Systems and Software, describes the DTSS family of systems and the DCGS-A that is used to support mission requirements. The DTSS has been absorbed under the DCGS-A program of record, but it is still in use across the geospatial force. The DTSS will be replaced in the near future.

Army Tactics Techniques Procedures Attp 3-21.50 Infantry Small-unit Mountain Operations, February 2011

Download Army Tactics Techniques Procedures Attp 3-21.50 Infantry Small-unit Mountain Operations, February 2011 PDF Online Free

Author :
Publisher : CreateSpace
ISBN 13 : 9781484153444
Total Pages : 116 pages
Book Rating : 4.1/5 (534 download)

DOWNLOAD NOW!


Book Synopsis Army Tactics Techniques Procedures Attp 3-21.50 Infantry Small-unit Mountain Operations, February 2011 by : United States Government Army

Download or read book Army Tactics Techniques Procedures Attp 3-21.50 Infantry Small-unit Mountain Operations, February 2011 written by United States Government Army and published by CreateSpace. This book was released on 2013-04-18 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATTP 3-21.50 provides perspective on Infantry company missions in an operational environment characterized by high-altitudes, rapidly changing climatic conditions, and rugged terrain. It also provides the small-unit leader with guidance on how company-sized units and below can conduct these operations. The mountain environment challenges all warfighting functions. Infantry units are full spectrum organizations, not specifically designed for mountain terrain but are well-suited for mountain operations. Successful units combine the basic doctrine described in FM 3-21.10 and augment with specialized equipment and predeployment training. The tactics and techniques specific to conducting operations in mountain terrain provide added operational capability. Table 6-3 in this manual depicts where Soldiers may obtain specialized mountaineering and cold weather operational skills. This manual focuses on company and below operations in mountain operational terrain levels II and III as described in FM 3-97.6, specifically, where the influence of increasingly steep and rugged terrain dictates the use of dismounted operations. For mountain operations in level I (lower, less rugged valleys and flatter terrain) refer to FM 3-21.10. The concepts discussed in this publication are useful in most mountain environments. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), and the United States Army Reserve (USAR) unless otherwise stated. The proponent of this publication is the United States Army Training and Doctrine Command (TRADOC). The preparing agency is the US Army Maneuver Center of Excellence (MCoE).

Army Tactics Techniques and Procedures Attp 3-20.97 Dismounted Reconnaissance Troop

Download Army Tactics Techniques and Procedures Attp 3-20.97 Dismounted Reconnaissance Troop PDF Online Free

Author :
Publisher : CreateSpace
ISBN 13 : 9781484149256
Total Pages : 174 pages
Book Rating : 4.1/5 (492 download)

DOWNLOAD NOW!


Book Synopsis Army Tactics Techniques and Procedures Attp 3-20.97 Dismounted Reconnaissance Troop by : United States Government Army

Download or read book Army Tactics Techniques and Procedures Attp 3-20.97 Dismounted Reconnaissance Troop written by United States Government Army and published by CreateSpace. This book was released on 2013-04-18 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Army Tactics, Techniques, and Procedures (ATTP) publication provides the doctrinal framework and tactical employment principles for the dismounted reconnaissance troop in the Infantry Brigade Combat Team's Reconnaissance Squadron. It is a companion to FM 3-21.10, The Infantry Rifle Company, and FM 3-20.971, Reconnaissance and Cavalry Troop, much of which applies to the dismounted reconnaissance troop and as such will not be repeated herein. This ATTP publication provides principles, tactics, techniques, and procedures for the employment of the dismounted reconnaissance troop throughout the spectrum of conflict.In-depth coverage of major topics covered in FM 3-21.10, but limited in discussion here, includes preparation for war; troop-leading procedures; battle command and control; offensive and defensive operations; risk management and fratricide avoidance; operations in a chemical, biological, radiological, and nuclear environment; Army health service support; media considerations; pattern analysis; and situation understanding.This ATTP publication applies to the Active Army, the Army National Guard/Army National Guard of the U.S., and U.S. Army Reserve, unless otherwise stated.This publication is specifically directed toward the dismounted reconnaissance troop commander, executive officer, first sergeant, subordinate leaders, and all supporting units. It focuses on the actions of the dismounted troop as related to the reconnaissance squadron, and the employment capabilities of the troop relative to its sister motorized reconnaissance troops. Specific emphasis is given to section and platoon operations when necessary. For additional section and platoon reconnaissance operations, see FM 3-20.98, Reconnaissance and Scout Platoon.This publication also--• Provides doctrinal guidance for commanders, staffs, and leaders of the organizations, and personnel responsible for planning, preparing, executing, and assessing operations of the dismounted reconnaissance troop. It is also useful for military instructors, evaluators, training and doctrine developers, and Infantry commanders, officers, and noncommissioned officers.• Updates existing doctrine based on current operations and higher doctrinal concepts and terminology, lessons learned from recent combat experiences, and training at the Joint Readiness Training Center.• Reflects and supports Army operations doctrine as covered in FM 3-0, Operations; FM 3-90, Tactics; FM 3-90.6, The Brigade Combat Team; FM 3-20.96, Reconnaissance and Cavalry Squadron; and FM 3-20.971, Reconnaissance and Cavalry Troop. It is not a stand-alone reference for reconnaissance operations. It is intended to be used in conjunction with these and other existing doctrinal resources.The proponent for this publication is the U.S. Army Training and Doctrine Command. The preparing agency is the U.S. Army Maneuver Center of Excellence.

ATTP 3-06.11 Combined Arms Operations in Urban Terrain

Download ATTP 3-06.11 Combined Arms Operations in Urban Terrain PDF Online Free

Author :
Publisher :
ISBN 13 :
Total Pages : 286 pages
Book Rating : 4.6/5 (769 download)

DOWNLOAD NOW!


Book Synopsis ATTP 3-06.11 Combined Arms Operations in Urban Terrain by : Headquarters Department of the Army

Download or read book ATTP 3-06.11 Combined Arms Operations in Urban Terrain written by Headquarters Department of the Army and published by . This book was released on 2020-08-19 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: FM 3-06.11 June 2011 Army Tactics, Techniques, and Procedures (ATTP) 3-06.11 establishes doctrine for combined arms operationsin urban terrain for the brigade combat team (BCT) and battalion/squadron commanders and staffs, company/troop commanders, small-unit leaders, and individual Soldiers. The continued trend worldwide of urban growth and the shift of populations from rural to urban areas continues to affect Army operations. The urban environment, consisting of complex terrain, dense populations, and integrated infrastructures, is the predominant operational environment in which Army forces currently operate. Each urban environment is unique and differs because of the combinations presented by the enemy, the urban area itself, the major operation of which it may be part (or the focus), and always changing societal and geopolitical considerations. Enemy forces will take advantage of this complex environment by intermingling with the populace. ATTP 3-06.11 describes the fundamental principles, tactics, techniques, and procedures (TTP) of urban operations (UO) across full spectrum operations, using the UO operational construct (understand, shape, engage, consolidate, and transition) to outline the discussions. ATTP 3-06.11 is based on current BCT structure and lessons learned from ongoing UO. Why buy a book you can download for free? We print the paperback book so you don't have to. First you gotta find a good clean (legible) copy and make sure it's the latest version (not always easy). Some documents found on the web are missing some pages or the image quality is so poor, they are difficult to read. If you find a good copy, you could print it using a network printer you share with 100 other people (typically its either out of paper or toner). If it's just a 10-page document, no problem, but if it's 250-pages, you will need to punch 3 holes in all those pages and put it in a 3-ring binder. Takes at least an hour. It's much more cost-effective to just order the bound paperback from Amazon.com We include a Table of Contents on the back cover for quick reference. We print these paperbacks as a service so you don't have to. The books are compact, tightly-bound paperback, full-size (8 1/2 by 11 inches), with large text and glossy covers. 4th Watch Publishing Co. is a SDVOSB. https: //usgovpub.com

Army Techniques Publication Atp 3-34.80 Geospatial Engineering February 2017

Download Army Techniques Publication Atp 3-34.80 Geospatial Engineering February 2017 PDF Online Free

Author :
Publisher : Createspace Independent Publishing Platform
ISBN 13 : 9781544888620
Total Pages : 110 pages
Book Rating : 4.8/5 (886 download)

DOWNLOAD NOW!


Book Synopsis Army Techniques Publication Atp 3-34.80 Geospatial Engineering February 2017 by : United States Government US Army

Download or read book Army Techniques Publication Atp 3-34.80 Geospatial Engineering February 2017 written by United States Government US Army and published by Createspace Independent Publishing Platform. This book was released on 2017-03-24 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Techniques Publication ATP 3-34.80 Geospatial Engineering February 2017 The geospatial engineering discipline is one of three engineering disciplines. It plays a major role in supporting the combat and general engineering disciplines. This discipline is essential to all lines of engineering support (assure mobility, enhance protection, enable force projection and logistics, and build partner capacity and develop infrastructure). Geospatial engineering is an art and a science that pertains to the generation, management, analysis, and dissemination of geospatial information that is accurately referenced to a precise location on the earth and is used in offense, defense, stability, or defense support of civil authorities tasks. These tasks provide mission-tailored data, tactical decision aids, and visualization products that enable the commander and staff to visualize the operational environment. Geospatial engineers aid in the analysis of physical and cultural mapping and other activities that significantly contribute to anticipating, estimating, and warning of possible future events. Providing geospatial information that is timely, accurate, and relevant is a critical enabler throughout the operations process for developing shared situational awareness, improving the understanding of capabilities and limitations for friendly forces and the adversary, and highlighting other conditions of the operational environment that are required for mission command. Today, geospatial engineering leverages finer temporal, spatial, and spectral resolutions from additional sensors and platforms that allow increased volumes and more complex data. New methods and technologies provide additional utility and capability and the ability to work effectively and efficiently within a broad pool of partners and allies. In addition to mastering their respective areas of expertise, engineer staff officers and other staff members must possess a thorough understanding of geospatial engineering to tailor geospatial information to support the mission command warfighting function. Advancements in technology and access to an abundance of information can quickly lead to information overload. Planners must be able to analyze the situation through the mission and operational variables, grasp the military significance of the challenges and opportunities presented, and manage information to enable situational understanding to support decision making. This manual describes the application of geospatial engineering in support of Army forces conducting unified land operations. It also acknowledges that Army doctrine remains dynamic-balancing current capabilities and situations with projected requirements for future operations. As geospatial engineering capabilities continue to improve through organizational changes, technological advancements, and emerging best practices, leaders and planners at all levels will be charged to leverage those improvements and adapt the processes and procedures that are described in this manual to meet the demands of, and provide the most effective geospatial support possible to, the commander.

Army Tactics, Techniques, and Procedures ATTP 4-10 (FM 3-100. 21) Operational Contract Support Tactics Techniques, and Procedures

Download Army Tactics, Techniques, and Procedures ATTP 4-10 (FM 3-100. 21) Operational Contract Support Tactics Techniques, and Procedures PDF Online Free

Author :
Publisher : CreateSpace
ISBN 13 : 9781484846223
Total Pages : 86 pages
Book Rating : 4.8/5 (462 download)

DOWNLOAD NOW!


Book Synopsis Army Tactics, Techniques, and Procedures ATTP 4-10 (FM 3-100. 21) Operational Contract Support Tactics Techniques, and Procedures by : United States Government US Army

Download or read book Army Tactics, Techniques, and Procedures ATTP 4-10 (FM 3-100. 21) Operational Contract Support Tactics Techniques, and Procedures written by United States Government US Army and published by CreateSpace. This book was released on 2013-04-30 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army continues enhancing its capability to plan and provide effective operational contract support (OCS) for deployed Army and Joint forces. Operational tempo and reduced force structure has created a greater reliance upon commercial support to augment uniformed capabilities. Because of the unique nature of contracted support in contingency operations, the Army has made a concerted effort to improve our capability to plan and effectively integrate OCS into full spectrum operations. While OCS provides a commercial means to fulfill Army requirements, the overall responsibility for mission accomplishment remains with the commander; not with the contracting support organization. This new Army tactics, techniques and procedures (ATTP) manual is written for Army operational commanders and their non-acquisition officer staffs. It is applicable from brigade to Army Service Component Command levels. It provides "how to" guidance for planning, requirements preparation, and integration of OCS into combat operations. This ATTP will also facilitate the effective transition from combat to security and stability operations. Application of this ATTP will enable Army operational commanders, and their staffs, to efficiently obtain and effectively utilize available commercial support in a theater of operations. This Army Tactics, Techniques and Procedures (ATTP) manual provides operational contract support (OCS) "how to" guidance for Army Force commanders and their non- acquisition officer staffs. It is applicable from brigade to Army Service Component Command levels. It serves as the primary reference document for execution of OCS planning and integration and oversight tasks laid out in the Common Battle Staff Task 71-8-4150, Coordinate Contracting Support and AR 715-9, Operational Contract Support Planning and Management. This publication also serves as the primary reference document for the Army Logistic University's OCS Course.

FM 3-05.401 Civil Affairs Tactics, Techniques, and Procedures

Download FM 3-05.401 Civil Affairs Tactics, Techniques, and Procedures PDF Online Free

Author :
Publisher : Independently Published
ISBN 13 :
Total Pages : 234 pages
Book Rating : 4.7/5 (27 download)

DOWNLOAD NOW!


Book Synopsis FM 3-05.401 Civil Affairs Tactics, Techniques, and Procedures by : U S Army

Download or read book FM 3-05.401 Civil Affairs Tactics, Techniques, and Procedures written by U S Army and published by Independently Published. This book was released on 2021-03-12 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual establishes the tactics, techniques, and procedures (TTP) used by individuals, teams, and units of United States (U.S.) Army and United States Marine Corps (USMC) Civil Affairs (CA) forces, as well as planners of civil-military operations (CMO) at the strategic, operational, and tactical levels of war. The TTP prescribed in this manual are used when engaging other government agencies (OGAs), indigenous populations and institutions (IPI), intergovernmental organizations (IGOs), nongovernmental organizations (NGOs), and other nonmilitary entities in support of conventional and special operations (SO) missions. This manual elaborates on doctrine contained in Field Manual (FM) 3-05.40, Civil Affairs Operations.

Army Tactics, Techniques, and Procedures ATTP 3-90. 15 (FM 3-90. 15) Site Exploitation Operations

Download Army Tactics, Techniques, and Procedures ATTP 3-90. 15 (FM 3-90. 15) Site Exploitation Operations PDF Online Free

Author :
Publisher : Createspace Independent Pub
ISBN 13 : 9781484829189
Total Pages : 70 pages
Book Rating : 4.8/5 (291 download)

DOWNLOAD NOW!


Book Synopsis Army Tactics, Techniques, and Procedures ATTP 3-90. 15 (FM 3-90. 15) Site Exploitation Operations by : United States Government Army

Download or read book Army Tactics, Techniques, and Procedures ATTP 3-90. 15 (FM 3-90. 15) Site Exploitation Operations written by United States Government Army and published by Createspace Independent Pub. This book was released on 2013-04-27 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Army tactics, techniques, and procedures provides doctrinal guidance and considerations for Army forces conducting site exploitation operations. It replaces FM 3-90.15, Sensitive Site Operations, 25 April 2007. Site exploitation doctrine now includes all sites that have the potential to yield valuable information, whether or not they are designated as sensitive. Site exploitation is an enduring and integral mission in support of full spectrum operations. This manual rescinds sensitive site exploitation as a doctrinal term. The former definition of sensitive site exploitation appeared in the 2007 edition of FM 3-90.15. That definition, which had originated as an Army term, also appeared in JP 1-02 but will be removed. This manual redefines site exploitation, which appeared in the 2007 edition of FM 3-90.15. The new definition of site exploitation will appear in the next revision of FM 1-02. When joint or Army terms are used and their definitions included in the text, those terms are italicized, and the number of the proponent manual follows the definition. This manual is organized into three chapters and two appendixes. Chapter 1 discusses conducting site exploitation operations, with an emphasis on the operations process, the purposes for site exploitation, and the framework for executing site exploitation operations. In chapter 1, this manual establishes the new doctrinal definition for the term site exploitation. Chapter 2 discusses specialized Army assets that support site exploitation. Chapter 3 discusses considerations related to sensitive sites. Sensitive sites are described in terms of a broad range of risks and challenges, not just weapons of mass destruction. Appendix A discusses joint and national organizations that support site exploitation. Appendix B discusses evidence collection, handling, and documentation, to support units that must handle evidence without the help of trained law enforcement personnel. This publication applies to the Active Army, Army National Guard (ARNG)/Army National Guard of the United Stated (ARNGUS), and United States Army Reserve (USAR) unless otherwise stated. This manual does not apply to site exploitation operations conducted by special operations forces. United States Army Training and Doctrine Command (TRADOC) is the proponent for this publication. The preparing agency is the Combined Arms Doctrine Directorate, U.S. Army Combined Arms Center.

Combined Arms Operations in Urban Terrain: The Official U.S. Army Tactics, Techniques, and Procedures Manual Attp 3-06.11 (FM 3-06.11), June 2011

Download Combined Arms Operations in Urban Terrain: The Official U.S. Army Tactics, Techniques, and Procedures Manual Attp 3-06.11 (FM 3-06.11), June 2011 PDF Online Free

Author :
Publisher : Military Bookshop
ISBN 13 : 9781780399775
Total Pages : 284 pages
Book Rating : 4.3/5 (997 download)

DOWNLOAD NOW!


Book Synopsis Combined Arms Operations in Urban Terrain: The Official U.S. Army Tactics, Techniques, and Procedures Manual Attp 3-06.11 (FM 3-06.11), June 2011 by : U. S. Army Training And Doctrine Command

Download or read book Combined Arms Operations in Urban Terrain: The Official U.S. Army Tactics, Techniques, and Procedures Manual Attp 3-06.11 (FM 3-06.11), June 2011 written by U. S. Army Training And Doctrine Command and published by Military Bookshop. This book was released on 2011-11 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Army Tactics, Techniques, and Procedures (ATTP) 3-06.11 establishes doctrine for combined arms operations in urban terrain for the brigade combat team (BCT) and battalion/squadron commanders and staffs, company/troop commanders, small-unit leaders, and individual Soldiers. The continued trend worldwide of urban growth and the shift of populations from rural to urban areas continues to affect Army operations. The urban environment, consisting of complex terrain, dense populations, and integrated infrastructures, is the predominant operational environment in which Army forces currently operate. Each urban environment is unique and differs because of the combinations presented by the enemy, the urban area itself, the major operation of which it may be part (or the focus), and always changing societal and geopolitical considerations. Enemy forces will take advantage of this complex environment by intermingling with the populace. ATTP 3-06.11 describes the fundamental principles, tactics, techniques, and procedures (TTP) of urban operations (UO) across full spectrum operations, using the UO operational construct (understand, shape, engage, consolidate, and transition) to outline the discussions. ATTP 3-06.11 is based on current BCT structure and lessons learned from ongoing UO.

Army Techniques Publication 3-34.81 Mcwp 3-17.4 Engineer Reconnaissance, March 2016

Download Army Techniques Publication 3-34.81 Mcwp 3-17.4 Engineer Reconnaissance, March 2016 PDF Online Free

Author :
Publisher : Createspace Independent Publishing Platform
ISBN 13 : 9781540395955
Total Pages : 160 pages
Book Rating : 4.3/5 (959 download)

DOWNLOAD NOW!


Book Synopsis Army Techniques Publication 3-34.81 Mcwp 3-17.4 Engineer Reconnaissance, March 2016 by : Us Army, United States Government

Download or read book Army Techniques Publication 3-34.81 Mcwp 3-17.4 Engineer Reconnaissance, March 2016 written by Us Army, United States Government and published by Createspace Independent Publishing Platform. This book was released on 2016-11-14 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATP 3-34.81 provides techniques for the performance of tactical and technical engineer reconnaissance in support of military activities that are conducted across the full range of military operations. This publication supports doctrine found in ADP 3-0, FM 3-34, ADRP 5-0, and ADRP 6-0. Although primarily oriented on the brigade combat team (BCT)/regimental combat team (RCT) based Marine air-ground task force (MAGTF) and below, the principal audience for ATP 3-34.81 is all members of the profession of arms. Commanders and staffs of Army and Marine Corps headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army and Marine Corps will also use this publication. The three engineer disciplines are combat (with the capabilities and activities of mobility, countermobility, and survivability [M/CM/S]), general, and geospatial engineering. These disciplines include significant reconnaissance capabilities. The three engineer disciplines include extensive discussion on integrating the planning for, and conduct of, engineer reconnaissance support within the tactical operations of the combined arms team. This publication discusses the capability resident within combat engineer units to form and employ engineer reconnaissance teams (ERTs). It also describes the capability resident within general engineer elements to form and employ ERTs, augment combat engineer ERTs, or provide assessment and survey teams. Finally, geospatial engineering enables reconnaissance and may play a large role, especially during the planning process. Engineer reconnaissance, like chemical, biological, radiological, and nuclear (CBRN) and other technical applications, is not a form of reconnaissance. Engineer reconnaissance is a focused application of special or unique capabilities supporting reconnaissance, and it is applicable to all forms of reconnaissance. The engineer disciplines provide reconnaissance capabilities that vary in linkages to warfighting functions, degrees of technical expertise, and effort applied to the assigned mission and tasks. Engineer reconnaissance is directly linked to geospatial intelligence because combat and general engineer units use technical measuring or survey devices to confirm, correct, or update the accuracy of available geospatial information. After analysis and comparison against other intelligence collections, this updated geospatial information becomes intelligence, which feeds the commander's decisionmaking process. Finally, this publication is written with the acknowledgement that the operational environment is more variable now. Engineers must be prepared to go into any operational environment and perform a full range of reconnaissance tasks in support of the maneuver commander while dealing with a wide range of threats and other influences. It builds on the collective knowledge and experience gained through nearly a dozen years of sustained military operations and exercises. It is rooted in time-tested principles and fundamentals, while accommodating new technologies and diverse threats to national security. This publication consists of five chapters and six appendixes that discuss the integration of engineer reconnaissance within the operational planning, execution, and assessment process that is presented in ADRP 5-0, ADRP 6-0, and MCWP 5-1.

Army Tactics, Techniques, and Procedures ATTP 3-97. 11 / MCRP 3-35. 1D Cold Region Operations with Change 1 June 2011

Download Army Tactics, Techniques, and Procedures ATTP 3-97. 11 / MCRP 3-35. 1D Cold Region Operations with Change 1 June 2011 PDF Online Free

Author :
Publisher : CreateSpace
ISBN 13 : 9781484857496
Total Pages : 106 pages
Book Rating : 4.8/5 (574 download)

DOWNLOAD NOW!


Book Synopsis Army Tactics, Techniques, and Procedures ATTP 3-97. 11 / MCRP 3-35. 1D Cold Region Operations with Change 1 June 2011 by : United States Government US Army

Download or read book Army Tactics, Techniques, and Procedures ATTP 3-97. 11 / MCRP 3-35. 1D Cold Region Operations with Change 1 June 2011 written by United States Government US Army and published by CreateSpace. This book was released on 2013-05-01 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Army tactics, techniques, and procedures (ATTP)/Marine Corps reference publication (MCRP) is the Army's doctrinal publication for operations in the cold region environment. Marines can utilize this publication as an operational reference with the 3-35 doctrinal series. It provides doctrinal guidance and direction for how United States (U.S.) forces conduct cold region operations. The purpose of ATTP 3-97.11/MCRP 3-35.1D is to arm leaders, Soldiers, and Marines with the necessary knowledge on how to operate in cold region environments. The information contained in this manual applies to all Soldiers and Marines, regardless of rank or job specialty. This manual is designed to work with and complement field manual (FM) 3-97.6, Mountain Operations, and FM 3-97.61, Military Mountaineering. This manual will enable leaders, Soldiers, and Marines to accurately describe cold region environments, their effects on military equipment, impacts these environments have on personnel, and most importantly, how to employ the elements of combat power in cold region environments. This ATTP provides the conceptual framework for conventional forces to conduct cold region operations within the construct of full spectrum operations, across the spectrum of conflict. It addresses cold region operations at operational and tactical levels. Chapter 1 discusses the characteristics of the cold region environment. Chapter 2 discusses the operations process. Chapter 3 identifies and discusses special considerations for operations in a cold region environment. Chapter 4 discusses how to conduct movement and maneuver in a cold region environment. Chapter 5 discusses how to apply sustainment principles unique to cold regions. Chapter 6 discusses how to apply combat power in the cold region environment. The two appendixes detail the special uniform, equipment, and heaters necessary in the cold region environment. This publication applies to the Active Army, the Army National Guard (ARNG)/Army National Guard of the United States (ARNGUS), United States Army Reserve (USAR), Marine Corps, and Marine Corps Reserve unless otherwise stated. Note for Marines: This manual is intended as an operational-level reference only. Some differences apply in clothing, equipment, vehicles, and aircraft (items the Marine Corps has that the Army does not and vice versa). These Marine Corps-specific differences and tactical-level differences (arising from the employment of heavy vice light infantry) are covered in MCRP 3-35.1A, Small-Unit Leader's Guide to Cold Weather Operations. The clothing, equipment, and tactics, techniques, and procedures for cold weather warfighting by Marines are covered in MCRP 3-35.1B, Instructor's Guide to Combat Skiing. By December 2011, the Marine Corps will update these publications and change the titles. The United States Marine Corps (USMC) lead agency and doctrinal proponent for mountain and cold region operations is the Marine Corps Mountain Warfare Training Center (MCMWTC) in Bridgeport, California. Contact MCMWTC, Operations and Training for further information. The proponent of this publication is the United States Army Training and Doctrine Command (TRADOC). The preparing agency is the Combined Arms Doctrine Directorate, U.S. Army Combined Arms Center.

Site Exploitation Operations

Download Site Exploitation Operations PDF Online Free

Author :
Publisher :
ISBN 13 : 9781304094223
Total Pages : pages
Book Rating : 4.0/5 (942 download)

DOWNLOAD NOW!


Book Synopsis Site Exploitation Operations by : Department Of The Army

Download or read book Site Exploitation Operations written by Department Of The Army and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Army Tactics, Techniques, and Procedures Attp 3-21.9 (Fm 3-21.9) Sbct Infantry Rifle Platoon and Squad

Download Army Tactics, Techniques, and Procedures Attp 3-21.9 (Fm 3-21.9) Sbct Infantry Rifle Platoon and Squad PDF Online Free

Author :
Publisher : CreateSpace
ISBN 13 : 9781484157718
Total Pages : 244 pages
Book Rating : 4.1/5 (577 download)

DOWNLOAD NOW!


Book Synopsis Army Tactics, Techniques, and Procedures Attp 3-21.9 (Fm 3-21.9) Sbct Infantry Rifle Platoon and Squad by : United States Government Army

Download or read book Army Tactics, Techniques, and Procedures Attp 3-21.9 (Fm 3-21.9) Sbct Infantry Rifle Platoon and Squad written by United States Government Army and published by CreateSpace. This book was released on 2013-04-19 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: ATTP 3-21.9 describes how the Stryker Brigade Combat Team (SBCT) Infantry rifle platoons and squads fight. ATTP 3-21.9 discusses how they operate as Infantry, mounted in their Stryker Infantry carrier vehicles (ICVs), with the ICV in support, and as part of the Stryker rifle company. The content includes principles, tactics, techniques, procedures, terms, and symbols that apply to small-unit operations. ATTP 3-21.9 is intentionally designed as a companion manual to FM 3-21.8. Many of the subjects covered in FM 3-21.8 are not only mutually applicable to the Stryker platoons and squads but also nearly identical and need not be republished. Because of this, ATTP 3-21.9 focuses on the unique characteristics and capabilities of the Stryker platoons and squads. Major areas reduced, or not included in this manual, are covered in detail in FM 3-21.8 and include—• Dismounted tactical movement.• Employing fires.• Troop-leading procedures (TLP).• Sustainment.• Air defense.• Chemical, biological, radiological, and nuclear (CBRN) operations.• Composite risk management.• Fratricide avoidance.• Urban operations (UO).• Sniper operations.• Patrols.• Employment of the dismounted element's weapons.• Platoon and squad fire planning.• Air assault operations.• Defeating improvised explosive devices (IED).• Obstacle reduction and employment.• Dismounted fighting positions.These are basic skills that Stryker small units and their leaders must understand, practice, and execute. Their absence from ATTP 3-21.9 in no way diminishes their importance. Rather, they are fundamental skills applicable to all Infantry units and leaders.To fully understand operations of the SBCT Infantry platoons and squads, leaders should also study FM 3-21.11, FM 3-20.151, Infantry platoon tasks on the Digital Training Management System (accessible on Army Knowledge Online [AKO]), Soldier's Manual of Common Tasks, and other manuals listed in the references.ATTP 3-21.9 supersedes FM 3-21.9, published in December 2002. The contents of the older manual are based primarily on the SBCT concept paper and interviews conducted during visits to the first Stryker-equipped units as they organized at Fort Lewis. ATTP 3-21.9 includes changes based on operational experience of deployed SBCT units. It also incorporates information on current Infantry platoon and squad tactics, the employment of the ICV, and the integration of command and control (C2) systems during combat.The target audience for ATTP 3-21.9 comprises SBCT platoon and squad leaders, SBCT Soldiers, and those that desire an understanding of how they fight and operate. ATTP 3-21.9 applies to the Active Army, the Army National Guard/ArmyNational Guard of the United States, and the United States Army Reserves unless otherwise stated.The proponent for this publication is the United States Army Training and Doctrine Command (TRADOC). The preparing agency is the U.S. Army Maneuver Center of Excellence (MCoE).